[mythtv-users] SOLVED - Re: HDPVR cat video0 input output error. Everything seems in place

[Mark]

On 10/31/2012 08:45 AM, Alan Young wrote:
> Mark wrote:
>> How do I make the debug verbose on the module?  hdpvr module I think 
>> would be the one?
>
> modinfo hdpvr will show the module's parameters.   Since you are 
> trying to copy video outside of
> mythtv, check that these are set correctly first
>
> parm:           default_video_input:default video input: 0=Component / 
> 1=S-Video / 2=Composite (uint)
>
> parm:           default_audio_input:default audio input: 0=RCA back / 
> 1=RCA front / 2=S/PDIF (uint)
>
> If unloading the module and reloading it with the correct input values 
> does not help, you can also set
> and reload the module with
>
> parm:           hdpvr_debug:enable debugging output (int)
>
> One other thing to check is that the HDPVR is plugged into a USB 2.0 
> or later host controller.
> Capturing more than a 480i signal with a USB 1.1 controller is known 
> not to work.
>
> Alan
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://www.mythtv.org/mailman/listinfo/mythtv-users
I hope this can help other users in the future.
The issue was that USB3 needed to be DISABLED in the BIOS.
Works perfectly now.

Odd issue.
Thanks all for their help.