[mythtv-users] Raspberry Pi suitability for MythFrontend

Greg Cope gregcope at gmail.com
Sun Sep 2 20:07:20 UTC 2012


On 2 Sep 2012, at 19:13, Raymond Wagner <raymond at wagnerrp.com> wrote:

> On 9/2/2012 13:09, Eugene Nadyrshin wrote:
>> Hi all, new to the list.
>> Just wanted to add that a few days ago the Raspberry Pi foundation made
>> it possible to buy MPEG2 (and VC-1) licences from their shop at
>> http://www.raspberrypi.com/mpeg-2-license-key/ for £2.40 (around $3.81)
>> Surely this is quite a game changed and removes the main obstacle to
>> using the RPi as a fully featured myth front end?
> 
> Not in the slightest. With many DVB users recording H264 directly, combined with users running HDPVR encoders, imaging their Bluray discs, or taking the time to recompress MPEG2 recordings, anything with a sufficiently robust H264 decoder is useful.
> 
> The two big obstacles are support for the hardware decoder (OpenMAX), and memory consumption. OpenMAX support is straight forward enough, someone just needs to spend the time to write it. With the performance of a low end P2, and less than 200MB of memory once the graphics core has had its fill, the RPi is similar in capability to the old desktop or dumpster-dived machine one might have sourced for MythTV at its original release. MythTV is designed for modern desktop hardware, and the RPi is about 15 years too late for that designation.
> 
> The CPU load probably won't be a big issue, but when you consider that's going to amount to maybe a couple percent the performance of a modern dual core CPU, it's hard to say what will happen. There are some known issues when entering Watch Recordings on low end Atom CPUs. More importantly, mythfrontend wants a lot of memory, and mythfrontend running at 1920x1080 wants a lot more memory. The RPi is going to be well into swap trying to run it. There is a good deal of work that needs to go into slimming things down before one might want to attempt using an RPi to run MythTV

Some us do not transcode, nor record or watch blueray or HD and run quite happily on low end Atom stuff.

I acknowledge it may not run much but I hope it might run a low end front end, so please let's not write it off just yet.

Greg


More information about the mythtv-users mailing list