[mythtv-users] tuner numbering

[Hika van den Hoven]

Hoi Daryl,

Friday, February 28, 2014, 1:51:51 PM, you wrote:

> On Fri, Feb 28, 2014 at 4:14 AM, Roger Siddons <dizygotheca at ntlworld.com> wrote:
>> On Fri, 28 Feb 2014 05:08:57 -0000, Daryl McDonald <darylangela at gmail.com>
>> wrote:
>>
>>>
>>> OK, that is what was returned to me too:
>>> DEVLINKS=/dev/dvb/test5/dvr0 /dev/dvb/test6/dvr0 /dev/test1 /dev/test2
>>> /dev/test4
>>>
>>> And as I look back through previous commands, my bad, only this time
>>> did I disable "digital-card", last attempt I disabled "capture-card",
>>> apologies.
>>
>>
>> No, that was correct. You did right.
>>
>>
>>> Seems now though that we're on the right rack. This test
>>> result was with both disabled, and after returning "capture-card"
>>> (this does keep the analog side of things straight)to .rules, I get
>>> the same test result, so now where do you recommend I go with the
>>> "digital-rules"?  Daryl
>>
>>
>> I suspect there's something wrong with your file digital-cards.rules. What
>> you last posted/indicated *looks* right, but it's tricky to see typos with
>> this stuff. And IIRC there was a previous occasion where someone (you?)
>> picked up an invisible character (non-breaking space ?) from an HTML email,
>> which prevented a script from working. Anyway now we know test.rules works,
>> treat it gently...
>>
>> So:
>>
>> 1. Delete digital-card.rules
>> 2. Rename test.rules to digital-card.rules
>> 3. Remove rules 1-4 and 6 - you only want to retain the rule with test5 in
>> it.
>> 4. Change "test5" to "HP1250"
>> 5. Duplicate the rule using copy/paste. In the 2nd rule change the device id
>> to "0x8802" and the symlink to "PC800i"
>> 6. Run the usual udevadm command on adapter 0 & 6 - you should see
>> appropriate DEVLINKS on both.
>> 7. Reboot and look for 2 directories /dev/dvb/HP1250 and /dev/dvb/PC800i.
>> Both should contain symlinks as per my original post.
>> 8. Try them out in mythtv-setup etc, etc.
>>
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users at mythtv.org
>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>> http://wiki.mythtv.org/Mailing_List_etiquette
>> MythTV Forums: https://forum.mythtv.org

> OK the links are set-up:
> daryl at daryl-A780L3C:~$ ls -l /dev/dvb/HP1250
> total 0
> lrwxrwxrwx 1 root root 18 Feb 28 07:29 demux0 -> ../adapter6/demux0
> lrwxrwxrwx 1 root root 16 Feb 28 07:29 dvr0 -> ../adapter6/dvr0
> lrwxrwxrwx 1 root root 21 Feb 28 07:29 frontend0 -> ../adapter6/frontend0
> lrwxrwxrwx 1 root root 16 Feb 28 07:29 net0 -> ../adapter6/net0
> daryl at daryl-A780L3C:~$ ls -l /dev/dvb/PC800i
> total 0
> lrwxrwxrwx 1 root root 18 Feb 28 07:29 demux0 -> ../adapter0/demux0
> lrwxrwxrwx 1 root root 16 Feb 28 07:29 dvr0 -> ../adapter0/dvr0
> lrwxrwxrwx 1 root root 21 Feb 28 07:29 frontend0 -> ../adapter0/frontend0
> lrwxrwxrwx 1 root root 16 Feb 28 07:29 net0 -> ../adapter0/net0
> daryl at daryl-A780L3C:~$

> But still when I go into the BE>CaptureCards, they will only present
> as adapter0/6 frontend0, I can type the smylink name in, and the card
> is not recognized or opened. IIRC Bill Meek said the symlink name
> would present while toggling through the adapter line, that's not my
> experience.  Daryl
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://www.mythtv.org/mailman/listinfo/mythtv-users
> http://wiki.mythtv.org/Mailing_List_etiquette
> MythTV Forums: https://forum.mythtv.org

And if you create a new adater, type in the simlink, close the setup,
restart the backend and go back to the setup.

Tot mails,
  Hika                            mailto:hikavdh at gmail.com

"Zonder hoop kun je niet leven
Zonder leven is er geen hoop
Het eeuwige dilemma
Zeker als je hoop moet vernietigen om te kunnen overleven!"

De lerende Mens
--