[mythtv-users] DVB-T2 290e Problem Tuning HD Channels UK Freeview.
Ian Barton
lists at wilkesley.net
Thu Jan 16 10:32:02 UTC 2014
So I got my new DVB-T2 290e added it to the backend, did a complete nuke
all channels and full rescan using the new card and found all the HD
channels. For 24hrs I was a very happy bunny as I could watch and record HD.
However, suddenly the card couldn't find the HD channels. No amount of
re-scanning, kernel downgrades, etc would make the HD channels re-appear.
I am in the Winter Hill reception area. I can receive HD fine by just
using the TV. We have three aerials in the house and I have tested using
all of them. I have tried the 290e on several boxes. All have the same
result, can tune all of the SD channels, but it doesn't find the HD ones.
If I run scan on the mux that has the HD channels I get the following
errors:
ian at mythtv:~$ sudo scan -a3 -o zap /home/ian/uk-WinterHill > channels3.conf
scanning /home/ian/uk-WinterHill
using '/dev/dvb/adapter3/frontend0' and '/dev/dvb/adapter3/demux0'
ERROR: invalid enum value '7378'
ERROR: invalid enum value '3300'
ERROR: invalid enum value '0'
ERROR: invalid enum value '8MHz'
ERROR: invalid enum value '2/3'
ERROR: invalid enum value 'NONE'
ERROR: invalid enum value 'QAM2'
initial transponder 2 3 9 9 6 2 4 4
>>> tune to:
2:INVERSION_AUTO:BANDWIDTH_AUTO:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO
__tune_to_transponder:1910: ERROR: Setting frontend parameters failed:
22 Invalid argument
>>> tune to:
2:INVERSION_AUTO:BANDWIDTH_AUTO:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO
__tune_to_transponder:1910: ERROR: Setting frontend parameters failed:
22 Invalid argument
ERROR: initial tuning failed
dumping lists (0 services)
Done.
The relevant mux info is:
#----------------------------------------------------------------------------------------------
# Auto-generated from:
#
<http://stakeholders.ofcom.org.uk/broadcasting/guidance/tech-guidance/transmitter-frequency/>
#----------------------------------------------------------------------------------------------
# location and provider: UK, Winter Hill
# date (yyyy-mm-dd) : 2013-09-18
#
# T[2] <freq> <bw> <fec_hi> <fec_lo> <mod> <tm> <guard> <hi> [<plp_id>]
[# comment]
#----------------------------------------------------------------------------------------------
#T 706000000 8MHz 2/3 NONE QAM64 8k 1/32 NONE # PSB1
#T 778000000 8MHz 2/3 NONE QAM64 8k 1/32 NONE # PSB2
T2 737833000 8MHz 2/3 NONE QAM256 32k 1/128 NONE 0 # PSB3
#T 770000000 8MHz 3/4 NONE QAM64 8k 1/32 NONE # COM4
#T 698000000 8MHz 3/4 NONE QAM64 8k 1/32 NONE # COM5
#T 746000000 8MHz 3/4 NONE QAM64 8k 1/32 NONE # COM6
Note I have commented out everything except for the T2 mux for testing.
According to http://www.ukfree.tv/txdetail.php?a=SD660144 that data is
still correct.
Can anyone suggest what has gone wrong?
Ian.
More information about the mythtv-users
mailing list