<html>
<body>
<font size=3>Any ideas? Can folks running Headless Fedora 15 MBEs who
want to use the GUI over vnc post their xorg.conf files?<br><br>
-- Mache<br><br>
At 10:08 AM 9/20/2011, Mache Creeger wrote:<br>
<blockquote type=cite class=cite cite="">I recently upgraded my MBE/FE
combo to Fedora 15 and am having <br>
problems running it headless. While it normally lives in my garage, I
<br>
have the mythtv account autologin and gain access to the FE and <br>
desktop through VNC not to run video but to do various housekeeping <br>
tasks on the GUI. I have tried various xorg.conf configurations and <br>
either X will not load because it cannot find the right edid or when
<br>
I can get X and Gnome to load and mythtv auto logs in, I get an error
<br>
on the mythtv desktop that states "could not apply the stored <br>
configuration for monitors", "none of the selected modes were
<br>
compatible with possible modes: CRTC 354: Trying mode..." and then a
<br>
bunch of resolutions in the 50 to 57 Mhz range. The error messages <br>
interferes with my launching and running mythfrontend on the Gnome <br>
desktop. Listed below is my most recent /etc/X11/xorg.conf attempt <br>
with some of the last lines of /var/log/Xorg.0.log. Any ideas would <br>
be most appreciated.<br><br>
-- Mache<br><br>
# uname -r<br>
2.6.40.4-5.fc15.x86_64<br><br>
# rpm -qa | grep mythtv-backend<br>
mythtv-backend-0.24.1-277.fc15.x86_64<br><br>
# cat /etc/X11/xorg.conf<br><br>
# nvidia-xconfig: X configuration file generated by nvidia-xconfig<br>
# nvidia-xconfig: version <br>
280.13 (buildmeister@swio-display-x86-rhel47-03.nvidia.com)
Wed Jul <br>
27 17:15:58 PDT 2011<br><br>
Section "ServerLayout"<br>
Identifier "Layout0"<br>
Screen 0 "Screen0" 0 0<br>
InputDevice "Keyboard0"
"CoreKeyboard"<br>
InputDevice "Mouse0"
"CorePointer"<br>
EndSection<br><br>
Section "Files"<br>
ModulePath
"/usr/lib64/xorg/modules/extensions/nvidia"<br>
ModulePath
"/usr/lib64/xorg/modules/extensions"<br>
ModulePath
"/usr/lib64/xorg/modules"<br>
FontPath
"/usr/share/fonts/default/Type1"<br>
EndSection<br><br>
Section "InputDevice"<br><br>
# generated from default<br>
Identifier
"Mouse0"<br>
Driver "mouse"<br>
Option "Protocol"
"auto"<br>
Option "Device"
"/dev/input/mice"<br>
Option "Emulate3Buttons"
"no"<br>
Option "ZAxisMapping" "4
5"<br>
EndSection<br><br>
Section "InputDevice"<br><br>
# generated from data in
"/etc/sysconfig/keyboard"<br>
Identifier
"Keyboard0"<br>
Driver "kbd"<br>
Option "XkbLayout"
"us"<br>
Option "XkbModel"
"pc105"<br>
EndSection<br><br>
Section "Monitor"<br>
Identifier
"Monitor0"<br>
VendorName
"Unknown"<br>
ModelName "Unknown"<br>
# HorizSync 28.0 -
33.0<br>
# VertRefresh 43.0 - 72.0<br>
Option "DPMS"<br>
EndSection<br><br>
Section "Device"<br>
Identifier
"Device0"<br>
Driver "nvidia"<br>
Option
"UseEDID" "FALSE"<br>
Option "UseDisplayDevice"
"CRT"<br>
VendorName
"NVIDIA Corporation"<br>
EndSection<br><br>
Section "Screen"<br>
Identifier
"Screen0"<br>
Device "Device0"<br>
Monitor "Monitor0"<br>
Option
"NoLogo" "True"<br>
DefaultDepth 24<br>
SubSection
"Display"<br>
Depth 24<br>
EndSubSection<br>
EndSection<br><br>
; Last few entries to /var/log/Xorg.0.log<br><br>
[ 22.215] (II) Loading
/usr/lib64/xorg/modules/drivers/nvidia_drv.so<br>
[ 22.215] (II) Loading
/usr/lib64/xorg/modules/libwfb.so<br>
[ 22.215] (II) Loading
/usr/lib64/xorg/modules/libfb.so<br>
[ 22.226] (**) NVIDIA(0): Depth 24, (--) framebuffer
bpp 32<br>
[ 22.226] (==) NVIDIA(0): RGB weight 888<br>
[ 22.226] (==) NVIDIA(0): Default visual is
TrueColor<br>
[ 22.226] (==) NVIDIA(0): Using gamma correction (1.0,
1.0, 1.0)<br>
[ 22.226] (**) NVIDIA(0): Option "NoLogo"
"True"<br>
[ 22.226] (**) NVIDIA(0): Option "UseEDID"
"FALSE"<br>
[ 22.226] (**) NVIDIA(0): Option
"UseDisplayDevice" "CRT"<br>
[ 22.226] (**) NVIDIA(0): Ignoring EDIDs<br>
[ 22.941] (II) NVIDIA(GPU-0): Not probing EDID on
CRT-1.<br>
[ 22.942] (II) NVIDIA(0): NVIDIA GPU GeForce 8400GS
(GT218) at <br>
PCI:1:0:0 (GPU-0)<br>
[ 22.942] (--) NVIDIA(0): Memory: 1048576 kBytes<br>
[ 22.942] (--) NVIDIA(0): VideoBIOS:
70.18.76.00.02<br>
[ 22.943] (II) NVIDIA(0): Detected PCI Express Link
width: 16X<br>
[ 22.943] (--) NVIDIA(0): Interlaced video modes are
supported on this GPU<br>
[ 22.943] (--) NVIDIA(0): Connected display device(s)
on GeForce <br>
8400GS at PCI:1:0:0<br>
[ 22.943] (--) NVIDIA(0):
CRT-1<br>
[ 22.943] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum
pixel clock<br>
[ 22.946] (II) NVIDIA(0): Option
"UseDisplayDevice" "CRT" <br>
converted to "CRT-1".<br>
[ 22.946] (**) NVIDIA(0): Using HorizSync/VertRefresh
ranges from <br>
the EDID has been<br>
[ 22.946] (**) NVIDIA(0):
enabled on all display devices.<br>
[ 22.949] (II) NVIDIA(0): Assigned Display Device:
CRT-1<br>
[ 22.949] (==) NVIDIA(0):<br>
[ 22.949] (==) NVIDIA(0): No modes were requested; the
default <br>
mode "nvidia-auto-select"<br>
[ 22.949] (==) NVIDIA(0): will
be used as the requested mode.<br>
[ 22.949] (==) NVIDIA(0):<br>
[ 22.949] (II) NVIDIA(0): Validated modes:<br>
[ 22.949] (II) NVIDIA(0):
"nvidia-auto-select"<br>
[ 22.949] (II) NVIDIA(0): Virtual screen size
determined to be 1024 x 768<br>
[ 22.970] (WW) NVIDIA(0): Unable to get display device
CRT-1's <br>
EDID; cannot compute DPI<br>
[ 22.970] (WW) NVIDIA(0): from
CRT-1's EDID.<br>
[ 22.970] (==) NVIDIA(0): DPI set to (75, 75); computed
from <br>
built-in default<br>
[ 22.970] (--) Depth 24 pixmap format is 32 bpp<br>
[ 22.970] (II) NVIDIA: Using 768.00 MB of virtual
memory for <br>
indirect memory access.<br>
[ 22.975] (II) NVIDIA(0): Setting mode
"nvidia-auto-select"<br>
[ 22.997] (II) Loading extension NV-GLX<br>
[ 23.038] (==) NVIDIA(0): Disabling shared memory
pixmaps<br>
[ 23.038] (==) NVIDIA(0): Backing store disabled<br>
[ 23.038] (==) NVIDIA(0): Silken mouse enabled<br>
[ 23.039] (**) NVIDIA(0): DPMS enabled<br>
[ 23.039] (II) Loading extension NV-CONTROL<br>
[ 23.039] (II) Loading extension XINERAMA<br>
[ 23.039] (II) Loading sub module "dri2"<br>
[ 23.039] (II) LoadModule: "dri2"<br>
[ 23.040] (II) Loading
/usr/lib64/xorg/modules/extensions/libdri2.so<br>
[ 23.040] (II) Module dri2: vendor="X.Org
Foundation"<br>
[ 23.040] compiled for 1.10.4, module
version = 1.2.0<br>
[ 23.040] ABI class: X.Org Server
Extension, version 5.0<br>
[ 23.040] (II) NVIDIA(0): [DRI2] Setup complete<br>
[ 23.040] (==) RandR enabled<br>
[ 23.040] (II) Initializing built-in extension Generic
Event Extension<br>
[ 23.040] (II) Initializing built-in extension
SHAPE<br>
[ 23.040] (II) Initializing built-in extension
MIT-SHM<br>
[ 23.040] (II) Initializing built-in extension
XInputExtension<br>
[ 23.040] (II) Initializing built-in extension
XTEST<br>
[ 23.040] (II) Initializing built-in extension
BIG-REQUESTS<br>
[ 23.040] (II) Initializing built-in extension
SYNC<br>
[ 23.040] (II) Initializing built-in extension
XKEYBOARD<br>
[ 23.040] (II) Initializing built-in extension
XC-MISC<br>
[ 23.040] (II) Initializing built-in extension
XINERAMA<br>
[ 23.040] (II) Initializing built-in extension
XFIXES<br>
[ 23.040] (II) Initializing built-in extension
RENDER<br>
[ 23.040] (II) Initializing built-in extension
RANDR<br>
[ 23.040] (II) Initializing built-in extension
COMPOSITE<br>
[ 23.040] (II) Initializing built-in extension
DAMAGE<br>
[ 23.040] (II) SELinux: Disabled on system<br>
[ 23.041] (II) Initializing extension GLX<br>
[ 23.458] (II) config/udev: Adding input device Power
Button <br>
(/dev/input/event1)<br>
[ 23.458] (**) Power Button: Applying InputClass
"evdev keyboard catchall"<br>
[ 23.458] (**) Power Button: Applying InputClass
"system-setup-keyboard"<br>
[ 23.458] (II) LoadModule: "evdev"<br>
[ 23.459] (II) Loading
/usr/lib64/xorg/modules/input/evdev_drv.so<br>
[ 23.488] (II) Module evdev: vendor="X.Org
Foundation"<br>
[ 23.489] compiled for 1.10.1, module
version = 2.6.0<br>
[ 23.489] Module class: X.Org XInput
Driver<br>
[ 23.489] ABI class: X.Org XInput
driver, version 12.2<br>
[ 23.489] (II) Using input driver 'evdev' for 'Power
Button'<br>
[ 23.489] (II) Loading
/usr/lib64/xorg/modules/input/evdev_drv.so<br>
[ 23.489] (**) Power Button: always reports core
events<br>
[ 23.489] (**) Power Button: Device:
"/dev/input/event1"<br>
[ 23.489] (--) evdev: Power Button: Vendor 0 Product
0x1<br>
[ 23.489] (--) Power Button: Found keys<br>
[ 23.489] (II) Power Button: Configuring as
keyboard<br>
[ 23.489] (**) Option "config_info" <br>
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"<br>
[ 23.489] (II) XINPUT: Adding extended input device
"Power Button" <br>
(type: KEYBOARD)<br>
[ 23.489] (**) Option "xkb_rules"
"evdev"<br>
[ 23.489] (**) Option "xkb_model"
"pc105+inet"<br>
[ 23.489] (**) Option "xkb_layout"
"us"<br>
[ 23.489] (**) Option "xkb_options"
"terminate:ctrl_alt_bksp,"<br>
[ 23.523] (II) config/udev: Adding input device Power
Button <br>
(/dev/input/event0)<br>
[ 23.523] (**) Power Button: Applying InputClass
"evdev keyboard catchall"<br>
[ 23.523] (**) Power Button: Applying InputClass
"system-setup-keyboard"<br>
[ 23.523] (II) Using input driver 'evdev' for 'Power
Button'<br>
[ 23.523] (II) Loading
/usr/lib64/xorg/modules/input/evdev_drv.so<br>
[ 23.523] (**) Power Button: always reports core
events<br>
[ 23.523] (**) Power Button: Device:
"/dev/input/event0"<br>
[ 23.523] (--) evdev: Power Button: Vendor 0 Product
0x1<br>
[ 23.523] (--) Power Button: Found keys<br>
[ 23.523] (II) Power Button: Configuring as
keyboard<br>
[ 23.523] (**) Option "config_info" <br>
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"<br>
[ 23.523] (II) XINPUT: Adding extended input device
"Power Button" <br>
(type: KEYBOARD)<br>
[ 23.523] (**) Option "xkb_rules"
"evdev"<br>
[ 23.523] (**) Option "xkb_model"
"pc105+inet"<br>
[ 23.523] (**) Option "xkb_layout"
"us"<br>
[ 23.523] (**) Option "xkb_options"
"terminate:ctrl_alt_bksp,"<br>
[ 23.525] (II) config/udev: Adding input device HDA
NVidia HDMI/DP <br>
(/dev/input/event4)<br>
[ 23.525] (II) No input driver/identifier specified
(ignoring)<br>
[ 23.525] (II) config/udev: Adding input device HDA
NVidia HDMI/DP <br>
(/dev/input/event5)<br>
[ 23.525] (II) No input driver/identifier specified
(ignoring)<br>
[ 23.525] (II) config/udev: Adding input device HDA
NVidia HDMI/DP <br>
(/dev/input/event6)<br>
[ 23.525] (II) No input driver/identifier specified
(ignoring)<br>
[ 23.525] (II) config/udev: Adding input device HDA
NVidia HDMI/DP <br>
(/dev/input/event7)<br>
[ 23.525] (II) No input driver/identifier specified
(ignoring)<br>
[ 23.534] (II) config/udev: Adding input device AT
Translated Set <br>
2 keyboard (/dev/input/event2)<br>
[ 23.534] (**) AT Translated Set 2 keyboard: Applying
InputClass <br>
"evdev keyboard catchall"<br>
[ 23.534] (**) AT Translated Set 2 keyboard: Applying
InputClass <br>
"system-setup-keyboard"<br>
[ 23.534] (II) Using input driver 'evdev' for 'AT
Translated Set 2 keyboard'<br>
[ 23.534] (II) Loading
/usr/lib64/xorg/modules/input/evdev_drv.so<br>
[ 23.534] (**) AT Translated Set 2 keyboard: always
reports core events<br>
[ 23.534] (**) AT Translated Set 2 keyboard: Device:
"/dev/input/event2"<br>
[ 23.534] (--) evdev: AT Translated Set 2 keyboard:
Vendor 0x1 Product 0x1<br>
[ 23.534] (--) AT Translated Set 2 keyboard: Found
keys<br>
[ 23.534] (II) AT Translated Set 2 keyboard:
Configuring as keyboard<br>
[ 23.534] (**) Option "config_info" <br>
"udev:/sys/devices/platform/i8042/serio0/input/input2/event2"<br>
[ 23.534] (II) XINPUT: Adding extended input device
"AT Translated <br>
Set 2 keyboard" (type: KEYBOARD)<br>
[ 23.534] (**) Option "xkb_rules"
"evdev"<br>
[ 23.534] (**) Option "xkb_model"
"pc105+inet"<br>
[ 23.534] (**) Option "xkb_layout"
"us"<br>
[ 23.534] (**) Option "xkb_options"
"terminate:ctrl_alt_bksp,"<br>
[ 23.535] (II) config/udev: Adding input device ImPS/2
Generic <br>
Wheel Mouse (/dev/input/event3)<br>
[ 23.535] (**) ImPS/2 Generic Wheel Mouse: Applying
InputClass <br>
"evdev pointer catchall"<br>
[ 23.535] (II) Using input driver 'evdev' for 'ImPS/2
Generic Wheel Mouse'<br>
[ 23.535] (II) Loading
/usr/lib64/xorg/modules/input/evdev_drv.so<br>
[ 23.535] (**) ImPS/2 Generic Wheel Mouse: always
reports core events<br>
[ 23.535] (**) ImPS/2 Generic Wheel Mouse: Device:
"/dev/input/event3"<br>
[ 23.535] (--) evdev: ImPS/2 Generic Wheel Mouse:
Vendor 0x2 Product 0x5<br>
[ 23.535] (--) ImPS/2 Generic Wheel Mouse: Found 3
mouse buttons<br>
[ 23.535] (--) ImPS/2 Generic Wheel Mouse: Found scroll
wheel(s)<br>
[ 23.535] (--) ImPS/2 Generic Wheel Mouse: Found
relative axes<br>
[ 23.535] (--) ImPS/2 Generic Wheel Mouse: Found x and
y relative axes<br>
[ 23.535] (II) ImPS/2 Generic Wheel Mouse: Configuring
as mouse<br>
[ 23.535] (II) ImPS/2 Generic Wheel Mouse: Adding
scrollwheel support<br>
[ 23.535] (**) ImPS/2 Generic Wheel Mouse:
YAxisMapping: buttons 4 and 5<br>
[ 23.535] (**) ImPS/2 Generic Wheel Mouse:
EmulateWheelButton: 4, <br>
EmulateWheelInertia: 10, EmulateWheelTimeout: 200<br>
[ 23.535] (**) Option "config_info" <br>
"udev:/sys/devices/platform/i8042/serio1/input/input3/event3"<br>
[ 23.535] (II) XINPUT: Adding extended input device
"ImPS/2 <br>
Generic Wheel Mouse" (type: MOUSE)<br>
[ 23.535] (II) ImPS/2 Generic Wheel Mouse: initialized
for relative axes.<br>
[ 23.535] (**) ImPS/2 Generic Wheel Mouse: (accel)
keeping <br>
acceleration scheme 1<br>
[ 23.535] (**) ImPS/2 Generic Wheel Mouse: (accel)
acceleration profile 0<br>
[ 23.535] (**) ImPS/2 Generic Wheel Mouse: (accel)
acceleration <br>
factor: 2.000<br>
[ 23.535] (**) ImPS/2 Generic Wheel Mouse: (accel)
acceleration threshold: 4<br>
[ 23.535] (II) config/udev: Adding input device ImPS/2
Generic <br>
Wheel Mouse (/dev/input/mouse0)<br>
[ 23.535] (II) No input driver/identifier specified
(ignoring)<br><br>
_______________________________________________<br>
mythtv-users mailing list<br>
mythtv-users@mythtv.org<br>
<a href="http://www.mythtv.org/mailman/listinfo/mythtv-users" eudora="autourl">
http://www.mythtv.org/mailman/listinfo/mythtv-users</a></font>
</blockquote></body>
</html>