On 9 November 2012 22:03, Stephen Robertson <<a href="mailto:stephengrobertson@gmail.com">stephengrobertson@gmail.com</a>> wrote:<br>>><br>>><br>> In the setup logs there are diseqc errors. When setting up your capture card in mythtv-setup there is a setting for this I have missed in the past, think for your case it needs set to LNB. Sorry that's a bit vague, I'm not at the pc just now but that may be enough of a clue for something to try.<br>
><br>> Cheers<br>> Stephen <br><br>Thanks Stephen. It's a dual card and I have set up both feeds to be LNB. One feed does go through motor, or rotor in Myth-speak, but I don't want to start moving the dish yet. Do I still need to tell it about the rotor? Come to think about it, I couldn't do a channel scan with adaptor0, only adaptor1.<br>
<br>I tried following the instructions from <a href="http://parker1.co.uk/mythtv_freesat.php">http://parker1.co.uk/mythtv_freesat.php</a> and this command worked:<br><br>scan -x0 /usr/share/dvb/dvb-s/Astra-28.2E | tee channels.conf<br>
<div><br></div>But when I tried: mplayer dvb://"BBC THREE" it just hung.<div><br></div><div>Cheers,</div><div><br></div><div>Mark</div>