-
..., not only for the power, but for the TV cable, too, if you're using cable TV to feed your box.
==Graphics cards==
17 KB (2,790 words) - 16:47, 26 May 2011
-
'''Video capture cards''' are used to get the picture from the cable, aerial, or satellite televis
...apture cards with [[video display card]]s which provide the output to the (tv)screen.
6 KB (998 words) - 19:31, 3 April 2011
-
===Video capture card===
:''Main article: [[Video capture card]]''
10 KB (1,705 words) - 07:11, 14 November 2011
-
* [http://www.arts-project.org aRts]: Analog Realtime Synthesizer
...t will upsample all of your audio to 48 kHz. This keeps it compatible with TV broadcasts as well as Dolby Digital and DTS surround on DVDs. ALSA typicall
16 KB (2,841 words) - 21:06, 11 October 2011
-
To watch TV at acceptable speeds, you'll want at least an 800 MHz G4 or better. For HDT
...ho will need 64-bit libraries to run [http://svn.whuffy.com/ shepherd] for TV guide data.
21 KB (3,159 words) - 19:39, 23 April 2012
-
...ke a modem extracting the original digital data. Unlike analog television capture, where a hardware encoder is desirable, compression of High Definition mate
This is called OTA (Over-The-Air), or [[ATSC]]. ATSC tuners capture the raw, compressed digital stream broadcast by the provider. Antenna Broa
12 KB (1,860 words) - 23:19, 11 September 2010
-
=== Pay TV ===
... MythTV supports both standards and can be received using a standard DVB-T capture card.
6 KB (1,041 words) - 09:11, 9 June 2011
-
{{Capture card info
...t one for your region. Additionally, the US version of the card has a dbx-TV stereo audio decoder, while the European version of the card has a Nicam st
3 KB (472 words) - 03:12, 28 September 2010
-
...]]''': Linux [http://linux.bytesex.org/v4l2/bttv.html driver] for TV tuner cards using the bt848 and bt878 chips
* '''CC''': closed captioning; displays the audio portion of TV shows as text superimposed on the video. CC is used with the NTSC standard.
4 KB (667 words) - 01:22, 12 September 2010
-
{{Capture card info
...ompression. Technically the card is functionally identical to two PVR-150 cards on their own PCI bridge in one socket, and requiring only one coaxial conne
18 KB (2,804 words) - 03:15, 28 September 2010
-
... only the higher frequency channels if your system is a hybrid system with analog channels utilizing the lower frequencies.
...ect] containing the digital channels you intend to receive. Do not include analog channels nor any channels which you cannot or do not receive. You may have
23 KB (3,588 words) - 20:40, 24 December 2011
-
... film (24 frames per second). Broadcasters who use ATSC and must retain an analog signal have to broadcast on two separate channels, as the ATSC system requi
==ATSC "HDTV" Capture Card Questions==
6 KB (932 words) - 23:26, 11 September 2010
-
...certainly not needed for use as a simple media player installation without TV features. [[mythfrontend]] WILL nag at users from time to time that it can'
...ry installing a PVR application on Windows before you got your video card, capture card, and audio system working perfectly. Don't try to do it on Linux.
50 KB (8,255 words) - 18:25, 15 April 2012
-
...45 ). With MythTV 0.23 and later, the ivtv Xorg/Xv driver is required for TV output using this card.}}
The Hauppauge PVR-350 is a [[video capture card]] manufactured by [http://www.hauppauge.com/pages/products/data_pvr350
9 KB (1,427 words) - 08:04, 14 September 2010
-
* Added [[MHEG]] content implementation (Interactive TV in UK)
* Added internal [[UPnP]] server support for TV and Music
35 KB (5,379 words) - 16:20, 28 September 2010
-
...fferent sizes, and the fact that many MythTV systems have multiple capture cards--allowing for recording multiple shows at once. Note, also, that any time
...aving space available for writing (i.e. having 2 filesystems for 2 capture cards with one filesystem completely full and the other only half full will not h
31 KB (4,907 words) - 02:53, 15 November 2011
-
...ame to get the proper drivers. The newer drivers will NOT work on "legacy" cards.
===Install capture card drivers===
32 KB (5,267 words) - 17:02, 24 March 2012
-
...ata needed in the program table and also enable you to use a DVB-EPG for a analog card that can receive the same channel.
...han commandline value X. E.G. cleanupRecordings 1000 will remove all live tv files and database entries.
48 KB (8,169 words) - 01:46, 4 May 2012
-
...are for use with MythTV is anything nVidia 8-series or better. If you need analog television output, only the 8 and 9 series support such, while the GT or la
...es for audio output in MythTV: analog, digital SPDIF, or digital HDMI. For analog audio, there is perceivable benefit to using a discrete audio card, as they
13 KB (2,049 words) - 19:38, 1 May 2012
-
... an external jack), or if you just don't want to use that connection, most cards supported by v4l2 allow you read the audio directly from the card using the
interference with your analog sound card's line input. But getting your
7 KB (1,217 words) - 21:52, 16 January 2010
