User:Paulhurleyuk

From MythTV Official Wiki
Jump to: navigation, search

Hello. My name's Paul.

You can find me at www.PaulHurley.co.uk. Myth-Users posts


My Current System

Backend

  • An Old Compaq PII-999Mhz, 256MB Ram
  • An Hauppauge Nova-T DVB-T Usb 2 Stick
  • A Pinnacle Hybrid Pro USB 2 stick
  • No-Name generic USB2 PCI card
  • MythBuntu 8.10 (Intrepid Ibex)
  • A Cold, Damp Garage

This has a funny issue where the Nova stick doesn't get picked up after boot. (fixed itself after an update) I need to unplug the stick and replug it to get Myth to recognise it. One day I'll find out what's going on.

FrontEnds

Various, including my Linux laptop, MythWeb and MythBuntu live CD's...

the Future

When I get happy with it, and I think the WAF will be acceptable, the system may expand...

Issues

Hauppauge Issues

...snip..
[   22.784722] parport_pc 00:08: reported by Plug and Play ACPI
[   22.784792] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   23.996097] usb 2-1: device not accepting address 2, error -110
[   24.108163] usb 2-1: new high speed USB device using ehci_hcd and address 3
[   28.408808] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[   28.408849] Intel ICH 0000:00:1f.5: setting latency timer to 64
.. snip ..
[   39.054950] ip_tables: (C) 2000-2006 Netfilter Core Team
[   39.664093] usb 2-1: device not accepting address 3, error -110
[   39.776112] usb 2-1: new high speed USB device using ehci_hcd and address 4
[   41.352227] ACPI: WMI: Mapper loaded
[   44.249572] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   47.529567] ppdev: user-space parallel port driver
[   50.208170] usb 2-1: device not accepting address 4, error -110
[   50.324168] usb 2-1: new high speed USB device using ehci_hcd and address 5
[   51.547744] NET: Registered protocol family 10
[   51.551700] lo: Disabled Privacy Extensions
.. snip ..
[   60.760090] usb 2-1: device not accepting address 5, error -110
[   60.763230] hub 2-0:1.0: unable to enumerate USB device on port 1
.. snip ..
[   66.200680] usb 3-1: new full speed USB device using uhci_hcd and address 2
[   66.721016] NET: Registered protocol family 17
[   66.846671] usb 3-1: not running at top speed; connect to a high speed hub
[   67.616150] usb 3-1: configuration #1 chosen from 1 choice
[   69.162467] dib0700: loaded with support for 7 different device-types
[   69.344149] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
[   69.351873] dvb-usb: This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)
[   69.358681] dvb-usb: Hauppauge Nova-T Stick error while loading driver (-19)
[   69.362941] usbcore: registered new interface driver dvb_usb_dib0700
.. snip..

.. Device unplugged, then replugged..

[  364.232133] usb 3-1: USB disconnect, address 2
[  377.124091] usb 2-1: new high speed USB device using ehci_hcd and address 6
[  377.337561] usb 2-1: configuration #1 chosen from 1 choice
[  377.345538] dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware
[  377.345570] firmware: requesting dvb-usb-dib0700-1.10.fw
[  377.698336] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
[  391.298168] dib0700: firmware started successfully.
[  391.800161] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
[  391.805366] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[  391.818349] DVB: registering new adapter (Hauppauge Nova-T Stick)
[  393.115218] DVB: registering frontend 0 (DiBcom 7000PC)...
[  393.765369] MT2060: successfully identified (IF1 = 1220)
[  394.862894] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1e.0/0000:02:08.2/usb2/2-1/input/input6
[  394.871050] dvb-usb: schedule remote query interval to 150 msecs.
[  394.871080] dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
[ 5280.585747] usb 2-1: USB disconnect, address 6
[ 5280.586105] dib0700: RC Query Failed
[ 5280.586118] dvb-usb: error while querying for an remote control event.
[ 5280.599267] dvb-usb: Hauppauge Nova-T Stick successfully deinitialized and disconnected.
[ 5286.696086] usb 2-3: new high speed USB device using ehci_hcd and address 7
[ 5286.910483] usb 2-3: configuration #1 chosen from 1 choice
[ 5286.948113] dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware
[ 5286.948146] firmware: requesting dvb-usb-dib0700-1.10.fw
[ 5287.202682] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
[ 5300.816075] dib0700: firmware started successfully.
[ 5301.320134] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
[ 5301.328842] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 5301.339742] DVB: registering new adapter (Hauppauge Nova-T Stick)
[ 5302.700436] DVB: registering frontend 0 (DiBcom 7000PC)...
[ 5302.740665] MT2060: successfully identified (IF1 = 1220)
[ 5303.824272] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1e.0/0000:02:08.2/usb2/2-3/input/input7
[ 5303.826350] dvb-usb: schedule remote query interval to 150 msecs.
[ 5303.826380] dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.

Pinnacle Issues

This didn't work under Jaunty (2.6.28.15-generic) until I installed the latest v4l (video for linux) drivers.

I followed the instructions here, rebooted, then followed the instructions here to install the xc3028 driver. The stick then worked.

dmesg output after install

[  113.260320] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)                  
[  113.260700] em28xx #0: chip ID is em2882/em2883                                                             
[  113.343859] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00                       
[  113.343872] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00                       
[  113.343883] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00                       
[  113.343893] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00                       
[  113.343904] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00                       
[  113.343915] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00                       
[  113.343925] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00                       
[  113.343935] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00                       
[  113.343945] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00                       
[  113.343956] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00                       
[  113.343966] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00                       
[  113.343977] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00                       
[  113.343987] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00                       
[  113.343997] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00                       
[  113.344008] em28xx #0: i2c eeprom e0: 5a 00 55 aa 79 55 54 03 00 17 98 01 00 00 00 00                       
[  113.344018] em28xx #0: i2c eeprom f0: 0c 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00                       
[  113.344029] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xb8846b20                                      
[  113.344031] em28xx #0: EEPROM info:                                                                         
[  113.344033] em28xx #0:       AC97 audio (5 sample rates)                                                    
[  113.344034] em28xx #0:       USB Remote wakeup capable                                                      
[  113.344036] em28xx #0:       500mA max power                                                                
[  113.344038] em28xx #0:       Table at 0x04, strings=0x206a, 0x006a, 0x0000                                  
[  113.344607] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)                             
[  113.344610] em28xx #0: Your board has no unique USB ID.                                                     
[  113.344613] em28xx #0: A hint were successfully done, based on eeprom hash.                                 
[  113.344615] em28xx #0: This method is not 100% failproof.
[  113.344617] em28xx #0: If the board were missdetected, please email this log to:
[  113.344619] em28xx #0:       V4L Mailing List  <linux-media@vger.kernel.org>
[  113.344621] em28xx #0: Board detected as Pinnacle Hybrid Pro
[  113.447135] tvp5150 0-005c: chip found @ 0xb8 (em28xx #0)
[  113.472888] tuner 0-0061: chip found @ 0xc2 (em28xx #0)
[  113.549784] xc2028 0-0061: creating new instance
[  113.549788] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[  113.549798] usb 1-6: firmware: requesting xc3028-v27.fw
[  113.570513] xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[  113.630575] xc2028 0-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[  114.533410] xc2028 0-0061: Loading firmware for type=(0), id 000000000000b700.
[  114.547029] SCODE (20000000), id 000000000000b700:
[  114.547034] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
[  114.728148] em28xx #0: Config register raw data: 0x58
[  114.728890] em28xx #0: AC97 vendor ID = 0xffffffff
[  114.729266] em28xx #0: AC97 features = 0x6a90
[  114.729268] em28xx #0: Empia 202 AC97 audio processor detected
[  114.852510] tvp5150 0-005c: tvp5150am1 detected.
[  114.949880] em28xx #0: v4l2 driver version 0.1.2
[  115.031084] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[  115.051431] usbcore: registered new interface driver snd-usb-audio
[  115.051652] usbcore: registered new interface driver em28xx
[  115.051655] em28xx driver loaded
[  115.252638] tvp5150 0-005c: tvp5150am1 detected.
[  115.525210] xc2028 0-0061: attaching existing instance
[  115.525214] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[  115.525216] em28xx #0/2: xc3028 attached
[  115.525219] DVB: registering new adapter (em28xx #0)
[  115.525222] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[  115.525570] Successfully loaded em28xx-dvb
[  115.525572] Em28xx: Initialized (Em28xx dvb Extension) extension