RadioShack 15-2116 Universal Remote

Incomplete, needs to be expanded. Please help to fill the gaps or discuss the issue on the talk page

The RadioShack 15-2116 8-IN-ONE Universal Remote Control

Press the device button you've programmed for VCR 0081 (this example assumes "AUX")
Press and hold the "P" key at the top left of the remote, until the LCD changes to read "CODE SET"
Down-arrow seven times, or until the LCD reads "KEYMOVER"
Press "SELECT" and the LCD should read "FROM MODE"
Press "AUX" and the LCD should now read "FROM KEY"
Now tap (don't hold) the "P" key, after which the LCD should read "SYNT"
At this point, you should be able to enter the desired 3-digit EFC, followed by the "SELECT" key
The LCD will read "TO MODE", so press "AUX" again
The LCD will read "TO KEY", so press the key you want that code mapped to
The LCD should briefly read "SUCCESS", then "EXIT SETUP", and you've got the key programmed. Rinse and repeat for all the keys you want to program.

Contents