Category:Firewire Priming Scripts
(Difference between revisions)
(Create a new subcategory for firewire priming scripts.) |
(Add "leftovers" from FIrewire Primer page.) |
||
| Line 1: | Line 1: | ||
Scripts for priming firewire connections. | Scripts for priming firewire connections. | ||
| + | |||
| + | *Update: there also exists a sa3250ch channel changer program. It is located in the contrib directory as well. It may require some hand tuning as there appears to be two ways to change the channel depending on the vendor ID in your hardware. For now you have to hand tweak the source based on the diffs floating around. I've found that changing the channel to channel 1 (TWC NYC) before priming or when the backend loses the cable box fixes everything. I'll detail the procedure as it has my setup running rock solid. | ||
| + | |||
| + | = Further Reading = | ||
| + | * [[FireWire]] | ||
| + | * [[Firewire Cablebox Compatability]] | ||
| + | * [http://ieee1394.wiki.kernel.org/ Linux1394, the Linux FireWire wiki] | ||
| + | |||
| + | [[Category:HOWTO]] | ||
[[Category:Scripts]] | [[Category:Scripts]] | ||
Revision as of 20:31, 21 April 2010
Scripts for priming firewire connections.
- Update: there also exists a sa3250ch channel changer program. It is located in the contrib directory as well. It may require some hand tuning as there appears to be two ways to change the channel depending on the vendor ID in your hardware. For now you have to hand tweak the source based on the diffs floating around. I've found that changing the channel to channel 1 (TWC NYC) before priming or when the backend loses the cable box fixes everything. I'll detail the procedure as it has my setup running rock solid.
Further Reading
Pages in category "Firewire Priming Scripts"
The following 6 pages are in this category, out of 6 total.
