Difference between revisions of "DViCO FusionHDTV DVB-T Dual Digital"
(→Additional Information) |
m (Protected "DViCO FusionHDTV DVB-T Dual Digital" ([edit=sysop] (indefinite) [move=sysop] (indefinite))) |
||
| (5 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
| + | {{Archived_Tuner|date=September 27, 2010|page=DViCO_FusionHDTV_DVB-T_Dual_Digital}} | ||
== Description == | == Description == | ||
| − | This is the original Dual HDTV Tuner from DVICO. The hardware | + | This is the original Dual HDTV Tuner from DVICO. The hardware incorporates a PCI on board Tuner, as well as a USB Tuner which plugs into a USB port via an external cable (supplied). It also includes a remote which requires the USB Loopback to work. |
[http://www.fusionhdtv.co.kr/ENG/Products/DualDigital.aspx DVICO - DViCO FusionHDTV DVB-T Dual Digital] | [http://www.fusionhdtv.co.kr/ENG/Products/DualDigital.aspx DVICO - DViCO FusionHDTV DVB-T Dual Digital] | ||
| Line 15: | Line 16: | ||
#http://www.itee.uq.edu.au/~chrisp/Linux-DVB/DVICO/ - Christopher Pascoe has created drivers for the following DVB-T cards from DViCO; | #http://www.itee.uq.edu.au/~chrisp/Linux-DVB/DVICO/ - Christopher Pascoe has created drivers for the following DVB-T cards from DViCO; | ||
#* DViCO FusionHDTV DVB-T1 | #* DViCO FusionHDTV DVB-T1 | ||
| − | #* | + | #* DViCO FusionHDTV DVB-T Lite |
#* DViCO FusionHDTV DVB-T Plus | #* DViCO FusionHDTV DVB-T Plus | ||
#* DViCO FusionHDTV DVB-T Dual Digital (both the PCI and the USB parts). | #* DViCO FusionHDTV DVB-T Dual Digital (both the PCI and the USB parts). | ||
| Line 23: | Line 24: | ||
Q. The PCI Tuner works but can't get the USB Tuner working?<br> | Q. The PCI Tuner works but can't get the USB Tuner working?<br> | ||
A. Check dmesg to ensure the firmware is loaded for the USB module. The message ''"dvb-usb: did not find the firmware file. (dvb-usb-bluebird-01.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)"'' requires the mentioned file to be loaded in /lib/firmware. It can be sourced at [http://www.linuxtv.org/download/dvb/firmware/dvb-usb-bluebird-01.fw] | A. Check dmesg to ensure the firmware is loaded for the USB module. The message ''"dvb-usb: did not find the firmware file. (dvb-usb-bluebird-01.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)"'' requires the mentioned file to be loaded in /lib/firmware. It can be sourced at [http://www.linuxtv.org/download/dvb/firmware/dvb-usb-bluebird-01.fw] | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Latest revision as of 03:35, 28 September 2010
Warning: This page has been locked and archived on September 27, 2010. The official documentation for this card can be found at DViCO_FusionHDTV_DVB-T_Dual_Digital. This page remains as there is significant information herein not included in the official documentation. Please migrate any such information to the proper location.
Contents
Description
This is the original Dual HDTV Tuner from DVICO. The hardware incorporates a PCI on board Tuner, as well as a USB Tuner which plugs into a USB port via an external cable (supplied). It also includes a remote which requires the USB Loopback to work.
DVICO - DViCO FusionHDTV DVB-T Dual Digital
Issues
There are no issues currently with this card.
Drivers
There are two options here for linux support. Older kernels didn't have native support and the following drivers have been created to fill the gap.
- http://www.itee.uq.edu.au/~chrisp/Linux-DVB/DVICO/ - Christopher Pascoe has created drivers for the following DVB-T cards from DViCO;
- DViCO FusionHDTV DVB-T1
- DViCO FusionHDTV DVB-T Lite
- DViCO FusionHDTV DVB-T Plus
- DViCO FusionHDTV DVB-T Dual Digital (both the PCI and the USB parts).
- The newer kernels have support.
FAQs
Q. The PCI Tuner works but can't get the USB Tuner working?
A. Check dmesg to ensure the firmware is loaded for the USB module. The message "dvb-usb: did not find the firmware file. (dvb-usb-bluebird-01.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)" requires the mentioned file to be loaded in /lib/firmware. It can be sourced at [1]
