Difference between revisions of "PVR-350 Remote Quick Guide"
m |
m |
||
(19 intermediate revisions by 6 users not shown) | |||
Line 1: | Line 1: | ||
− | + | Here is a remote control image/guide I put together for the new | |
+ | grey/black remote for the PVR-350. | ||
− | + | Basically, the buttons are labeled, many of which are obvious, but it might be useful for a | |
− | |||
− | labeled, many of which are obvious, but it might be useful for a | ||
newbie. | newbie. | ||
Line 10: | Line 9: | ||
http://wilsonet.com/mythtv/lircrc-haupgrey-g3.txt | http://wilsonet.com/mythtv/lircrc-haupgrey-g3.txt | ||
− | [[Image:pvr350_grey_remote_generic.gif]] | + | There is also an older grey remote (it is the one with a square pattern of four colored buttons in the middle), for which you can use [[pvr350_oldgrey_remote_lircrc|this]] for your ~/.mythtv/lircrc. |
+ | |||
+ | |||
+ | == Remotes for PVR-350 == | ||
+ | |||
+ | {| border=1 cellspacing=0 cellpadding=2 | ||
+ | | | ||
+ | | [[Image:pvr350_grey_remote_generic.gif]] | ||
+ | | [[Image:PVR-350-old-remote.jpg]] | ||
+ | |- | ||
+ | | Version | ||
+ | | <center>1</center> | ||
+ | | <center>2 (old)</center> | ||
+ | |- | ||
+ | | Battery holder | ||
+ | | [[Image:PVR-350-newer-remote-PN.jpg]] | ||
+ | | [[Image:PVR-350-old-remote-PN.jpg]] | ||
+ | |- | ||
+ | | Model | ||
+ | | <center>A415-HPG</center> | ||
+ | | <center>R808-HPG-S</center> | ||
+ | |- | ||
+ | | Features | ||
+ | | <center>more buttons</center> | ||
+ | | <center>none</center> | ||
+ | |} | ||
+ | |||
+ | == Which lircrc == | ||
+ | Now you can see the difference between the model above. I could never tell, which is grey, silver or platinum? | ||
+ | There are links to lircrc, but I think there are many wrong lircrc going around. As a newbie I wanted to have a simple lircrc | ||
+ | to see if it works with the standard features. And when I have that, I can continous with MPlayer, Xine and so on. | ||
+ | |||
+ | |||
+ | == Simple lircrc == | ||
+ | |||
+ | === Version 1 (newer remote) === | ||
+ | |||
+ | For the newer Gray remote | ||
+ | |||
+ | Found, trimmed Mplayer and xine elements, at this link | ||
+ | |||
+ | http://wilsonet.com/mythtv/lircrc-haupgrey-g3.txt | ||
+ | |||
+ | {{LIRC|lircrc| | ||
+ | <pre> | ||
+ | |||
+ | # ~/.mythtv/lircrc | ||
+ | # | ||
+ | # MythTV native LIRC config file for | ||
+ | # the new grey Hauppauge remote | ||
+ | # | ||
+ | # Modified from Jarod Wilson's which came from Jeff Campbell's | ||
+ | # By Brad Templeton | ||
+ | |||
+ | |||
+ | # Here we have the jump point commands. They only work if you have | ||
+ | # defined function keys for these jump points. For me the most | ||
+ | # common command is the menu of recordings, so I put that on "videos" | ||
+ | # even though that's counter-intuitive | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = TV | ||
+ | repeat = 3 | ||
+ | config = F5 | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Videos | ||
+ | repeat = 3 | ||
+ | config = F2 | ||
+ | end | ||
+ | |||
+ | # Not yet defined | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Music | ||
+ | repeat = 3 | ||
+ | config = Up | ||
+ | end | ||
+ | |||
+ | # Given another function for now, I don't use mythgallery | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Pictures | ||
+ | repeat = 3 | ||
+ | config = F | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Guide | ||
+ | repeat = 3 | ||
+ | config = F3 | ||
+ | end | ||
+ | |||
+ | # I stuck the "todo" list on here as Myth has no radio function | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Radio | ||
+ | repeat = 3 | ||
+ | config = F4 | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = UP | ||
+ | repeat = 3 | ||
+ | config = Up | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = DOWN | ||
+ | repeat = 3 | ||
+ | config = Down | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = LEFT | ||
+ | repeat = 3 | ||
+ | config = Left | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = RIGHT | ||
+ | repeat = 3 | ||
+ | config = Right | ||
+ | end | ||
+ | |||
+ | # Channel Up | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Channel-UP | ||
+ | repeat = 3 | ||
+ | config = Up | ||
+ | end | ||
+ | |||
+ | # Channel Down | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Channel-DOWN | ||
+ | repeat = 3 | ||
+ | config = Down | ||
+ | end | ||
+ | |||
+ | # OK/Select | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Ok | ||
+ | config = Space | ||
+ | end | ||
+ | |||
+ | # Play | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Play | ||
+ | config = Return | ||
+ | end | ||
+ | |||
+ | # Stop | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Stop | ||
+ | config = I | ||
+ | end | ||
+ | |||
+ | # Escape/Exit/Back | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Back/Exit | ||
+ | config = Esc | ||
+ | end | ||
+ | |||
+ | # Power Off/Exit | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Power | ||
+ | config = Esc | ||
+ | end | ||
+ | |||
+ | |||
+ | # Pause | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Pause | ||
+ | repeat = 3 | ||
+ | config = P | ||
+ | end | ||
+ | |||
+ | # Mute | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Mute | ||
+ | repeat = 3 | ||
+ | config = | | ||
+ | end | ||
+ | |||
+ | # Fast forward (30 sec default) | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Rewind | ||
+ | repeat = 3 | ||
+ | config = < | ||
+ | end | ||
+ | |||
+ | # Rewind (10 sec default) | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Forward | ||
+ | repeat = 3 | ||
+ | config = > | ||
+ | end | ||
+ | |||
+ | # Skip forward (10 min default) | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Next | ||
+ | repeat = 3 | ||
+ | config = End | ||
+ | end | ||
+ | |||
+ | # Skip backward (10 min default) | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Previous | ||
+ | repeat = 3 | ||
+ | config = Home | ||
+ | end | ||
+ | |||
+ | # Record | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Record | ||
+ | repeat = 3 | ||
+ | config = R | ||
+ | end | ||
+ | |||
+ | # Delete | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Red | ||
+ | repeat = 3 | ||
+ | config = D | ||
+ | end | ||
+ | |||
+ | # Decrease play speed | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Green | ||
+ | repeat = 3 | ||
+ | config = J | ||
+ | end | ||
+ | |||
+ | # Display EPG while in live TV, | ||
+ | # View selected show while in EPG | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Menu | ||
+ | repeat = 3 | ||
+ | config = M | ||
+ | end | ||
+ | |||
+ | # Scroll up | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Volume-UP | ||
+ | repeat = 3 | ||
+ | config = F11 | ||
+ | end | ||
+ | |||
+ | # Scroll down | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Volume-DOWN | ||
+ | repeat = 3 | ||
+ | config = F10 | ||
+ | end | ||
+ | |||
+ | # Bring up OSD info | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Go | ||
+ | repeat = 3 | ||
+ | config = I | ||
+ | end | ||
+ | |||
+ | # Change display aspect ratio | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Prev-Channel | ||
+ | repeat = 3 | ||
+ | config = W | ||
+ | end | ||
+ | |||
+ | # double speed watch | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Yellow | ||
+ | repeat = 3 | ||
+ | config = J | ||
+ | end | ||
+ | |||
+ | # change tuners | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = hash | ||
+ | repeat = 3 | ||
+ | config = Y | ||
+ | end | ||
+ | |||
+ | # Bring up Time stretch | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Blue | ||
+ | repeat = 3 | ||
+ | config = A | ||
+ | end | ||
+ | |||
+ | # Numbers 0-9 | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = 0 | ||
+ | repeat = 3 | ||
+ | config = 0 | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = 1 | ||
+ | repeat = 3 | ||
+ | config = 1 | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = 2 | ||
+ | repeat = 3 | ||
+ | config = 2 | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = 3 | ||
+ | repeat = 3 | ||
+ | config = 3 | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = 4 | ||
+ | repeat = 3 | ||
+ | config = 4 | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = 5 | ||
+ | repeat = 3 | ||
+ | config = 5 | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = 6 | ||
+ | repeat = 3 | ||
+ | config = 6 | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = 7 | ||
+ | repeat = 3 | ||
+ | config = 7 | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = 8 | ||
+ | repeat = 3 | ||
+ | config = 8 | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = 9 | ||
+ | repeat = 3 | ||
+ | config = 9 | ||
+ | end | ||
+ | |||
+ | |||
+ | </pre> | ||
+ | }} | ||
+ | |||
+ | === Version 2 (older remote) === | ||
+ | |||
+ | ==== Version 2 lircrc (older remote) ==== | ||
+ | |||
+ | More information to the buttons for mythTV /usr/share/doc/mythtv-frontend/keys.txt.gz open it with less | ||
+ | <pre>less keys.txt.gz</pre> | ||
+ | |||
+ | {{LIRC|lircrc| | ||
+ | <pre> | ||
+ | |||
+ | # ~/.mythtv/lircrc | ||
+ | # | ||
+ | # MythTV native LIRC config file for | ||
+ | # the Hauppauge remote R808-HPG-S | ||
+ | # | ||
+ | # Modified from Tido | ||
+ | # | ||
+ | # Simple layout to check standard features. | ||
+ | # The middle Diamond is only used for up,down,left,right otherwise | ||
+ | # you can experience problem with double assignment. | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Power | ||
+ | config = Escape | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Go | ||
+ | config = Space | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = 1 | ||
+ | config = 1 | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = 2 | ||
+ | config = 2 | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = 3 | ||
+ | config = 3 | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = 4 | ||
+ | config = 4 | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = 5 | ||
+ | config = 5 | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = 6 | ||
+ | config = 6 | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = 7 | ||
+ | config = 7 | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = 8 | ||
+ | config = 8 | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = 9 | ||
+ | config = 9 | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Back | ||
+ | config = Escape | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = 0 | ||
+ | config = 0 | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Menu | ||
+ | config = M | ||
+ | end | ||
+ | |||
+ | # * * begin of the middle area * * | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | # This is the Red key | ||
+ | # We'll use it for "Delete" | ||
+ | button = Red | ||
+ | config = D | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | # This is the Green key | ||
+ | # We'll use it for "Information" | ||
+ | button = Green | ||
+ | config = I | ||
+ | end | ||
+ | |||
+ | # Note the "repeat =" strings in the volume and channel. | ||
+ | # This means that if you hold down the key, every nth instance will be | ||
+ | # passed. This depends on your system, so you may want to increase or | ||
+ | # decrease this and see what happens. repeat = 1 is probably too | ||
+ | # fast. | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | # used for Left-key | ||
+ | button = Vol- | ||
+ | # repeat = 3 | ||
+ | config = Left | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | # used for Right-key | ||
+ | button = Vol+ | ||
+ | # repeat = 3 | ||
+ | config = Right | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Ch+ | ||
+ | # This is the "up" on the central diamond | ||
+ | # repeat = 3 | ||
+ | config = Up | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Ch- | ||
+ | # This is the "down" on the central diamond | ||
+ | # repeat = 3 | ||
+ | config = Down | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | # Middle button on the diamond | ||
+ | button = Ok | ||
+ | config = Space | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | # This is the Yellow-key | ||
+ | # We'll use it for Volume-down | ||
+ | button = Yellow | ||
+ | config = F10 | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | # This is the Blue-key | ||
+ | # We'll use it for Volume-up | ||
+ | button = Blue | ||
+ | config = F11 | ||
+ | end | ||
+ | |||
+ | # * * end of the middle area * * | ||
+ | |||
+ | # * * begin of the lower area * * | ||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Mute | ||
+ | config = F9 | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | # Display the Program Guide (EPG) | ||
+ | button = Blank | ||
+ | config = S | ||
+ | end | ||
+ | |||
+ | # begin | ||
+ | # prog = mythtv | ||
+ | # # Toggle PiP on/off | ||
+ | # button = Full | ||
+ | # config = V | ||
+ | # end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Rewind | ||
+ | config = < | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Play | ||
+ | config = p | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Forward | ||
+ | config = > | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Record | ||
+ | config = R | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Stop | ||
+ | config = P | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Pause | ||
+ | config = P | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Replay | ||
+ | config = Left | ||
+ | end | ||
+ | |||
+ | begin | ||
+ | prog = mythtv | ||
+ | button = Skip | ||
+ | config = Right | ||
+ | end | ||
+ | </pre> | ||
+ | }} | ||
+ | |||
+ | ==== Version 2 lircd.conf (older remote) ==== | ||
+ | |||
+ | {{LIRC|lircd.conf| | ||
+ | <pre> | ||
+ | begin remote | ||
+ | name hauppauge_pvr | ||
+ | bits 13 | ||
+ | flags RC5|CONST_LENGTH | ||
+ | eps 30 | ||
+ | aeps 100 | ||
+ | one 969 811 | ||
+ | zero 969 811 | ||
+ | plead 1097 | ||
+ | gap 114605 | ||
+ | toggle_bit 2 | ||
+ | |||
+ | |||
+ | begin codes | ||
+ | Power 0x00000000000017FD | ||
+ | Go 0x00000000000017FB | ||
+ | 1 0x00000000000017C1 | ||
+ | 2 0x00000000000017C2 | ||
+ | 3 0x00000000000017C3 | ||
+ | 4 0x00000000000017C4 | ||
+ | 5 0x00000000000017C5 | ||
+ | 6 0x00000000000017C6 | ||
+ | 7 0x00000000000017C7 | ||
+ | 8 0x00000000000017C8 | ||
+ | 9 0x00000000000017C9 | ||
+ | Back 0x00000000000017DF | ||
+ | 0 0x00000000000017C0 | ||
+ | Menu 0x00000000000017CD | ||
+ | Red 0x00000000000017CB | ||
+ | Green 0x00000000000017EE | ||
+ | Yellow 0x00000000000017F8 | ||
+ | Blue 0x00000000000017E9 | ||
+ | Ch+ 0x00000000000017E0 | ||
+ | Ch- 0x00000000000017E1 | ||
+ | Vol- 0x00000000000017D1 | ||
+ | Vol+ 0x00000000000017D0 | ||
+ | Ok 0x00000000000017E5 | ||
+ | Mute 0x00000000000017CF | ||
+ | Blank 0x00000000000017CC | ||
+ | Full 0x00000000000017FC | ||
+ | Rewind 0x00000000000017F2 | ||
+ | Play 0x00000000000017F5 | ||
+ | Forward 0x00000000000017F4 | ||
+ | Record 0x00000000000017F7 | ||
+ | Stop 0x00000000000017F6 | ||
+ | Pause 0x00000000000017F0 | ||
+ | Replay 0x00000000000017E4 | ||
+ | Skip 0x00000000000017DE | ||
+ | |||
+ | end codes | ||
+ | |||
+ | end remote | ||
+ | </pre> | ||
+ | }} | ||
+ | |||
+ | |||
+ | [[Category:Remote Controls]] |
Latest revision as of 00:16, 17 March 2011
Here is a remote control image/guide I put together for the new grey/black remote for the PVR-350.
Basically, the buttons are labeled, many of which are obvious, but it might be useful for a newbie.
Here is the the lirc config file I used:
http://wilsonet.com/mythtv/lircrc-haupgrey-g3.txt
There is also an older grey remote (it is the one with a square pattern of four colored buttons in the middle), for which you can use this for your ~/.mythtv/lircrc.
Contents
Remotes for PVR-350
Version | |
|
Battery holder | ||
Model | |
|
Features | |
|
Which lircrc
Now you can see the difference between the model above. I could never tell, which is grey, silver or platinum? There are links to lircrc, but I think there are many wrong lircrc going around. As a newbie I wanted to have a simple lircrc to see if it works with the standard features. And when I have that, I can continous with MPlayer, Xine and so on.
Simple lircrc
Version 1 (newer remote)
For the newer Gray remote
Found, trimmed Mplayer and xine elements, at this link
http://wilsonet.com/mythtv/lircrc-haupgrey-g3.txt
# ~/.mythtv/lircrc # # MythTV native LIRC config file for # the new grey Hauppauge remote # # Modified from Jarod Wilson's which came from Jeff Campbell's # By Brad Templeton # Here we have the jump point commands. They only work if you have # defined function keys for these jump points. For me the most # common command is the menu of recordings, so I put that on "videos" # even though that's counter-intuitive begin prog = mythtv button = TV repeat = 3 config = F5 end begin prog = mythtv button = Videos repeat = 3 config = F2 end # Not yet defined begin prog = mythtv button = Music repeat = 3 config = Up end # Given another function for now, I don't use mythgallery begin prog = mythtv button = Pictures repeat = 3 config = F end begin prog = mythtv button = Guide repeat = 3 config = F3 end # I stuck the "todo" list on here as Myth has no radio function begin prog = mythtv button = Radio repeat = 3 config = F4 end begin prog = mythtv button = UP repeat = 3 config = Up end begin prog = mythtv button = DOWN repeat = 3 config = Down end begin prog = mythtv button = LEFT repeat = 3 config = Left end begin prog = mythtv button = RIGHT repeat = 3 config = Right end # Channel Up begin prog = mythtv button = Channel-UP repeat = 3 config = Up end # Channel Down begin prog = mythtv button = Channel-DOWN repeat = 3 config = Down end # OK/Select begin prog = mythtv button = Ok config = Space end # Play begin prog = mythtv button = Play config = Return end # Stop begin prog = mythtv button = Stop config = I end # Escape/Exit/Back begin prog = mythtv button = Back/Exit config = Esc end # Power Off/Exit begin prog = mythtv button = Power config = Esc end # Pause begin prog = mythtv button = Pause repeat = 3 config = P end # Mute begin prog = mythtv button = Mute repeat = 3 config = | end # Fast forward (30 sec default) begin prog = mythtv button = Rewind repeat = 3 config = < end # Rewind (10 sec default) begin prog = mythtv button = Forward repeat = 3 config = > end # Skip forward (10 min default) begin prog = mythtv button = Next repeat = 3 config = End end # Skip backward (10 min default) begin prog = mythtv button = Previous repeat = 3 config = Home end # Record begin prog = mythtv button = Record repeat = 3 config = R end # Delete begin prog = mythtv button = Red repeat = 3 config = D end # Decrease play speed begin prog = mythtv button = Green repeat = 3 config = J end # Display EPG while in live TV, # View selected show while in EPG begin prog = mythtv button = Menu repeat = 3 config = M end # Scroll up begin prog = mythtv button = Volume-UP repeat = 3 config = F11 end # Scroll down begin prog = mythtv button = Volume-DOWN repeat = 3 config = F10 end # Bring up OSD info begin prog = mythtv button = Go repeat = 3 config = I end # Change display aspect ratio begin prog = mythtv button = Prev-Channel repeat = 3 config = W end # double speed watch begin prog = mythtv button = Yellow repeat = 3 config = J end # change tuners begin prog = mythtv button = hash repeat = 3 config = Y end # Bring up Time stretch begin prog = mythtv button = Blue repeat = 3 config = A end # Numbers 0-9 begin prog = mythtv button = 0 repeat = 3 config = 0 end begin prog = mythtv button = 1 repeat = 3 config = 1 end begin prog = mythtv button = 2 repeat = 3 config = 2 end begin prog = mythtv button = 3 repeat = 3 config = 3 end begin prog = mythtv button = 4 repeat = 3 config = 4 end begin prog = mythtv button = 5 repeat = 3 config = 5 end begin prog = mythtv button = 6 repeat = 3 config = 6 end begin prog = mythtv button = 7 repeat = 3 config = 7 end begin prog = mythtv button = 8 repeat = 3 config = 8 end begin prog = mythtv button = 9 repeat = 3 config = 9 end
Version 2 (older remote)
Version 2 lircrc (older remote)
More information to the buttons for mythTV /usr/share/doc/mythtv-frontend/keys.txt.gz open it with less
less keys.txt.gz
# ~/.mythtv/lircrc # # MythTV native LIRC config file for # the Hauppauge remote R808-HPG-S # # Modified from Tido # # Simple layout to check standard features. # The middle Diamond is only used for up,down,left,right otherwise # you can experience problem with double assignment. begin prog = mythtv button = Power config = Escape end begin prog = mythtv button = Go config = Space end begin prog = mythtv button = 1 config = 1 end begin prog = mythtv button = 2 config = 2 end begin prog = mythtv button = 3 config = 3 end begin prog = mythtv button = 4 config = 4 end begin prog = mythtv button = 5 config = 5 end begin prog = mythtv button = 6 config = 6 end begin prog = mythtv button = 7 config = 7 end begin prog = mythtv button = 8 config = 8 end begin prog = mythtv button = 9 config = 9 end begin prog = mythtv button = Back config = Escape end begin prog = mythtv button = 0 config = 0 end begin prog = mythtv button = Menu config = M end # * * begin of the middle area * * begin prog = mythtv # This is the Red key # We'll use it for "Delete" button = Red config = D end begin prog = mythtv # This is the Green key # We'll use it for "Information" button = Green config = I end # Note the "repeat =" strings in the volume and channel. # This means that if you hold down the key, every nth instance will be # passed. This depends on your system, so you may want to increase or # decrease this and see what happens. repeat = 1 is probably too # fast. begin prog = mythtv # used for Left-key button = Vol- # repeat = 3 config = Left end begin prog = mythtv # used for Right-key button = Vol+ # repeat = 3 config = Right end begin prog = mythtv button = Ch+ # This is the "up" on the central diamond # repeat = 3 config = Up end begin prog = mythtv button = Ch- # This is the "down" on the central diamond # repeat = 3 config = Down end begin prog = mythtv # Middle button on the diamond button = Ok config = Space end begin prog = mythtv # This is the Yellow-key # We'll use it for Volume-down button = Yellow config = F10 end begin prog = mythtv # This is the Blue-key # We'll use it for Volume-up button = Blue config = F11 end # * * end of the middle area * * # * * begin of the lower area * * begin prog = mythtv button = Mute config = F9 end begin prog = mythtv # Display the Program Guide (EPG) button = Blank config = S end # begin # prog = mythtv # # Toggle PiP on/off # button = Full # config = V # end begin prog = mythtv button = Rewind config = < end begin prog = mythtv button = Play config = p end begin prog = mythtv button = Forward config = > end begin prog = mythtv button = Record config = R end begin prog = mythtv button = Stop config = P end begin prog = mythtv button = Pause config = P end begin prog = mythtv button = Replay config = Left end begin prog = mythtv button = Skip config = Right end
Version 2 lircd.conf (older remote)
begin remote name hauppauge_pvr bits 13 flags RC5|CONST_LENGTH eps 30 aeps 100 one 969 811 zero 969 811 plead 1097 gap 114605 toggle_bit 2 begin codes Power 0x00000000000017FD Go 0x00000000000017FB 1 0x00000000000017C1 2 0x00000000000017C2 3 0x00000000000017C3 4 0x00000000000017C4 5 0x00000000000017C5 6 0x00000000000017C6 7 0x00000000000017C7 8 0x00000000000017C8 9 0x00000000000017C9 Back 0x00000000000017DF 0 0x00000000000017C0 Menu 0x00000000000017CD Red 0x00000000000017CB Green 0x00000000000017EE Yellow 0x00000000000017F8 Blue 0x00000000000017E9 Ch+ 0x00000000000017E0 Ch- 0x00000000000017E1 Vol- 0x00000000000017D1 Vol+ 0x00000000000017D0 Ok 0x00000000000017E5 Mute 0x00000000000017CF Blank 0x00000000000017CC Full 0x00000000000017FC Rewind 0x00000000000017F2 Play 0x00000000000017F5 Forward 0x00000000000017F4 Record 0x00000000000017F7 Stop 0x00000000000017F6 Pause 0x00000000000017F0 Replay 0x00000000000017E4 Skip 0x00000000000017DE end codes end remote