Removing Commercials

From MythTV Official Wiki
Revision as of 14:23, 26 April 2006 by Kkuphal (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Introduction

MythTV does not automatically remove commercials. The system will flag commercials and skip them during playback. It can also transcode recordings between MPEG-2 and MPEG-4 or lossless transcode MPEG-2 and remove a cutlist from the program. Since a list of commercial flags is not a cutlist, it is not removed automatically. This document describes how to remove commercials permanently from the source material.

Removing commercials using mythfrontend

EditMenu.jpg

You can remove commercials that have been flagged by editing the recording using mythfrontend. Once you have brought up the timeline editor you can press Z to load the flagged commercials as a cutlist in the editor. Once the cutpoints are created, you can manipulate them normally in the editor to get the exactly where you want them. It is uncommon for the commercial detection to be perfect all the time so some tweaking may be necessary.

After editing is complete, you can choose Begin Transcoding from the OSD menu or you can also choose to Begin Transcoding from the INFO menu in the Watch Recordings screen under Job Options. This will insert a transcode job into the Job Queue which will convert the recording based on your transcode settings in the recording profiles setup.

Removing commercials from the command-line

You can also remove commercials using the command-line utilities mythcommflag and mythtranscode.

Use mythcommflag to create a cutlist from a completed commercial flagging using

mythcommflag --gencutlist

Then use mythtranscode to transcode the recording using the cutlist with

mythtranscode --honorcutlist

You will need the additional standard options to both programs to choose the proper program based on filename or channel and time. Look at the --help output from each program for details on using these options

Automatically removing commercials

In the 0.20 release of MythTV, you can specify a custom command-line option for both the commercial flagging job and the transcoding job. Using this function, you could create a wrapper script for transcoding after commercial flagging that would use the command-line options outlined above. If someone successfully implements this option, please detail your configuration here.