Difference between revisions of "Silicondust HDHomeRun Dual"
(→North America Digital Cable: put sentence in comcast section)
m (shift link following page move)
|Line 151:||Line 151:|
== North America Digital Cable ==
== North America Digital Cable ==
Note: you may find [[
Note: you may find [] to be an alternative option that may more easily align channel numbers.
Revision as of 16:54, 20 June 2010
The HDHomeRun, by Silicondust USA (a wholly owned subsidiary of Silicondust Engineering, New Zealand), is an external HDTV tuner for personal computers. It actually has two independent tuners, and interfaces to the computer via ethernet. The device is supported by MythTV (since v0.20), as well as many other PVR software packages.
Since it tunes only digital signals (OTA HDTV as well as "Clear" QAM digital cable), which are already MPEG2 encoded, it has no MPEG encoding hardware.
- 1 More Information
- 2 Overview
- 3 Instructions (from HDHomeRun Forum)
- 4 North America Digital Antenna
- 5 North America Digital Cable
- 6 What to do if you get no channels
- 7 Can't Connect to HDHR?
- 8 Fixing HDHomeRun Channel Scanning in MythTV .20
- 9 Network Connection
- Silicondust HDHomeRun (also lists sellers)
- Silicondust Channel Search (lets you see what channels are available for your zip code)
- Official HDHomeRun Forum (hosted by silicondust.com) Official HDHomeRun Forum
- HDHomeRun Forum (hosted by 9thtee.com) HDHomeRun Forum
- Ubuntu Wiki's instructions (includes screen shots) 
- HDHomeRun Development Guide.
- HDHomeRun® CableCARD™ 
Watch over-the-air digital & unencrypted digital cable TV from all computers in your home network
Single or dual tuners, depending on model - record/watch multiple channels at once
IR Receiver - use most standard remotes to signal your PC
Gets IP address via DHCP
- Windows Media Center:
- MCE 2005 (beta).
- Vista MCE 32-bit (beta).
- Vista MCE 64-bit (beta).
- SnapStream BeyondTV (beta)
- SageTV - DVR for Windows.
- MediaPortal - DVR for Windows (beta).
- GB-PVR - DVR for Windows (beta).
- MythTV - DVR for Linux.
- Pluto - Home automation & media system.
- VLC - Multi-platform media viewer.
- 8-VSB (ATSC over-the-air digital HDTV)
- QAM64/256 (unencrypted digital cable TV)
- Single or dual HDTV tuners, depending on model
- IR Receiver (38kHz)
- 100baseTX high speed network
- Networked Digital HDTV Tuner
- Power supply
- 7' RJ45 Patch Cable
Instructions (from HDHomeRun Forum)
If you are running an older version of MythTV you will need to upgrade to 0.20 (or later).
If you are using the MythTV 0.20 Ubuntu/Debian package then you will need to update /usr/lib/libmythtv-0.20.so.0.20.0 once mythtv has been installed. http://www.silicondust.com/hdhomerun/libmythtv-0.20.so.tgz
mythtv-setup - Capture device Add a new capture card with the following configuration: Card type: HDHomeRun DTV tuner box Device ID: <number from back of HDHomeRun> Tuner: 0 Finish: <enter>
Shortcut - if there is only one HDHomeRun on the local network you can use the wildcard FFFFFFFF device ID.
Repeat adding a second capture card for tuner 1: Card type: HDHomeRun DTV tuner box Device ID: <number from back of HDHomeRun> Tuner: 1 Finish: <enter>
Setting up IR Forwarding
The HDHomeRun (HDHR) is capable of forwarding IR commands via your LAN to LIRC. This can save you some money on purchasing an additional IR receiver for your frontend. However, the IR receiver is very directional and may require you to aim the remote directly at the HDHR. These instructions come from the Silicondust website.
If you don't have them installed already, you need the hdhomerun_config tools installed. If you're using Ubuntu or one of its derivatives, you can install this by entering the following within a terminal:
sudo apt-get install hdhomerun-config
Now that you have the HDHR software installed, you need to figure out what the <device id> of your box is. Do this by entering the following command:
You should get a result that follows this format:
hdhomerun device <device id> found at <device IP address>
Now you need to tell the HDHR to send IR commands to your frontend's IP via a specific port. Port 5000 is used below, but it can be set to any unused port. Just make sure you remember what you set it to because we'll be using that when setting up LIRC.
hdhomerun_config <device id> set /ir/target "<frontend IP address>:5000 no_clear"
NOTE: Silicondust's website says that you can save the IR target to the HDHR's flash memory using the following command. I've had difficulty getting this to work, but here's the command. If this doesn't work either, you'll just need to issue the above command whenever your HDHR is unplugged and sometimes if your router gets reset.
hdhomerun_config <device id> set /ir/target "<frontend IP address>:5000 store"
The last thing to do is to get LIRC listening for IR commands being sent from your HDHR. We'll kill any lircd processes first, just to be sure. Then we'll get LIRC listening on the proper port. We're using port 5000 again here, because that's what we told the HDHR to use. If you used another port, you'll need to specify that same port here.
sudo killall lircd sudo lircd -H udp -d 5000
That's it. If mythfrontend is already running on your machine, you'll need to exit out of it and restart the frontend (just the application, not the computer) for it to work.
North America Digital Antenna
mythtv-setup - Video sources Add a new video source with the following configuration: Video source name: Antenna Listings grabber: No grabber (will come back and change this later) Channel frequency table: us-bcast mythtv-setup - Input connections Configure HDHomeRun Port 0 as follows: Video source: Antenna External channel change command: <blank> Preset tuner to channel: <blank> Scan for channels: <enter> Scan for channels page: Scan type: Full scan Frequency table: Broadcast ATSC modulation: Terrestrial (8-VSB) Channel seperator: Period Existing channel treatment: Minimal updates Next: <enter> Back on "Connect source to input page": Starting channel: <choose a valid channel> Finish <enter> Repeat for HDHomeRun Port 1. mythtv-setup - Channel Editor Note list of channels for source "Antenna" Schedules Direct Create an account here. The price is 20$/year with first 7 days free. http://www.schedulesdirect.org/ Create a channel lineup and enable/disable channels based on channels listed in the Channel Editor in mythtv-setup. mythtv-setup - Video sources Change the configuration for antenna as follows: Listings grabber: North America (Schedules Direct) (Internal) User id: <login name for schedulesdirect> Password: <password for schedulesdirect> Retrieve lineups: <enter> Data direct lineup: <select correct listing> Finish <enter>
North America Digital Cable
Note: you may find Scte65scan to be an alternative option that may more easily align channel numbers.
mythtv-setup - Video sources Add a new video source with the following configuration: Video source name: Digital Cable Listings grabber: No grabber (will come back and change this later) Channel frequency table: us-cable mythtv-setup - Input connections Configure HDHomeRun Port 0 as follows: Video source: Digital Cable External channel change command: <blank> Preset tuner to channel: <blank> Select "Scan for channels" <enter> Scan for channels page: Scan type: Full scan Frequency table: Cable ATSC modulation: Cable (QAM-256) Channel seperator: Period Existing channel treatment: Minimal updates Next: <enter> Back on "Connect source to input page": Select "Scan for channels" <enter> Scan for channels page: Scan type: Full scan Frequency table: Cable ATSC modulation: Cable (QAM-64) Channel seperator: Period Existing channel treatment: Minimal updates Next: <enter> Back on "Connect source to input page": Starting channel: <choose a valid channel> Finish <enter> Repeat for HDHomeRun Port 1. mythtv-setup - Channel Editor Note list of channels for source "Digital Cable" Schedules Direct Create an account here: http://schedulesdirect.org/ Create a channel lineup and enable/disable channels based on channels listed in the Channel Editor in mythtv-setup. Make sure the channel name and number in Schedules Direct matches the display channel name and number in the Channel Editor in MythTV. Note that MythTV uses the ATSC channel numbering as specified in the transport stream, not the remapped cable channel numbering so you will need to select OTA/Antenna as the source in Schedules Direct. However a mapping must be made to ensure that the listings correspond to the correct channels. mythtv-setup - Video sources Change the configuration for digital cable as follows: Listings grabber: North America (Schedules Direct) (Internal) User id: <login name for Schedules Direct> Password: <password for Schedules Direct> Retrieve lineups: <enter> Schedules Direct lineup: <select correct listing> Finish <enter>
What to do if you get no channels
If you know you for a fact that you should be getting some channels, but mythtv's scanning isn't working - you can try to fix it by doing these two things:
- Install the hdhomerun-config utility ( For recent distributions of Ubuntu it's as simple as
sudo apt-get install hdhomerun-config)
hdhomerun-config discoverand make note of the actual device ID, use this instead of FFFFFFF
- delete the HDHR tuners and re-add them
For at least one user, the above set of steps solved the problem of getting 0 channels reported. The hdhomerun-config may be required for the scanner to work properly?
Can't Connect to HDHR?
You may have a firewall in the middle blocking traffic. If so, an easy solution is adding a firewall rule that permits all traffic to and from the HDHR.
The following example uses the HDHR's mac address to avoid any hassles with IP changes:
-A INPUT -m mac --mac-source HDHR:MAC:ADDRESS -j ACCEPT
It is convenient (or maybe required for your OS flavor when using a GUI to edit the rules) to store this rule in an external file. For example, on Fedora, /etc/sysconfig/iptables-hdhomerun, and add a custom rule that refers to that file.
Fixing HDHomeRun Channel Scanning in MythTV .20
Note these instructions are seemingly obsolete, and have nothing to do with channel scanning not getting a channel because the signal was not strong enough. (mythfrontend, but surprisingly not mythtv-setup, has a configuration setting for minimum signal level to offer the channel. Default is 65%)
In order to get channel scan working correctly in MythTV .20, you need to get the RPM's that Jarod Wilson patched with the .20-fixes including the fix for HDHR. Update the following packages:
http://dl.atrpms.net/mythdora/4.0/i386/os/MythDora/libmyth-0.20.1-156.3.md4.i386.rpm http://dl.atrpms.net/mythdora/4.0/i386/os/MythDora/mythtv-setup-0.20.1-156.3.md4.i386.rpm http://dl.atrpms.net/mythdora/4.0/i386/os/MythDora/mythtv-backend-0.20.1-156.3.md4.i386.rpm
or the Easy Way:
cat << EOF >> /etc/yum.repos.d/mythdora.repo [mythdora] name=MythDora 4 - i386 baseurl=http://dl.atrpms.net/mythdora/4.0/i386/os/ enabled=0 gpgcheck=0 EOF yum --enablerepo=mythdora upgrade \*myth\*
You should be able to scan channels using mythtv-setup now. If you have any problems (missing tables and such) try deleting all the channels first and then rescanning. I ended up getting a clean start by deleting all channels and capture cards then starting fresh with these packages.
The HDHomeRun normally expects to obtain a DHCP lease. However, with the latest firmware it is also possible to configure it statically. This is particularly convenient if you want to connect the HDHomeRun directly to a NIC on your MythTV system, rather than through a switch on your network. To do this, configure your local interface with a static IP address in the range of 169.254.x.x (eg. 169.254.1.10) with a subnet mask of 255.255.0.0 and no gateway.