Difference between revisions of "User:Rkuris"
m (added user to User_Systems group) |
(→Software) |
||
Line 9: | Line 9: | ||
==Software== | ==Software== | ||
*[http://www.gentoo.org Gentoo Linux] | *[http://www.gentoo.org Gentoo Linux] | ||
− | *[http://www.mythtv.org MythTV] 0. | + | *[http://www.mythtv.org MythTV] 0.21 |
+ | |||
==Timeline== | ==Timeline== | ||
Most of my stuff shipped on November 14, 2006. I started doing the basic installation on November 16th. | Most of my stuff shipped on November 14, 2006. I started doing the basic installation on November 16th. |
Revision as of 14:37, 17 June 2008
Hardware
I currently own the following:
- Samsung LNS4095D 46" LCD display.
- Antek Fusion Case
- MSI K9NBPM2-FID Motherboard
- Athlon 64 X2 4200+ (65W) with 512MB RAM
- Maxtor SATA 200MB Hard Drive
- PCHDTV HD-5500 Capture Card
Software
- Gentoo Linux
- MythTV 0.21
Timeline
Most of my stuff shipped on November 14, 2006. I started doing the basic installation on November 16th. My initial bootup attempt was to boot from a flash memory stick, since I have no DVD nor floppy to boot from. Setting up a LiveUSB media stick was a huge challenge.
Service Providers
I started off with SureWest Broadband but found that they used an Amino AmiNET110 box, which does not provide a digital signal, and it's not practical to convert this to a digital signal for recording. The CABLE OUT side doesn't produce HDTV. So, I ordered Comcast Cable and I'm anxiously awaiting installation. They are using a Motorola DCT-6200 Cable Box with firewire support. I intend to use the capture card to capture the unencoded digital signals, and use the firewire port to catch the rest.
I ordered Comcast, and they dug a trench on the day after Thanksgiving, cutting my Surewest fiber and leaving me without service for days. Wish me luck on getting a refund.
Issues
HDTV works fine. Looks like I need to use a IR blaster and grab the standard AV output of the SureWest box. Not sure what to do about HD yet, other than use the OTA signal.
Resolved Issues
Originally, I was getting NO signal on the v4l side of things on pcHDTV 5500, just static. I finally got the signal problem resolved! There were two things needed:
- install the 'tuner' module - add "options cx88xx tuner=47" to /etc/modules.d/dvb