Difference between revisions of "VAAPI"

From MythTV Official Wiki
Jump to: navigation, search
Line 2: Line 2:
 
{{Wikipedia|Video Acceleration API}}
 
{{Wikipedia|Video Acceleration API}}
  
'''V'''ideo '''A'''cceleration '''API''' is a successor to [[XvMC]], providing partial and full hardware offloading of video decoding. This interface is available on Intel graphics. Interface frontends are also available for ATI's XvBA and nVidia's [[VDPAU]]. This interface will be supported by MythTV as of 0.25.
+
'''V'''ideo '''A'''cceleration '''API''' is a successor to [[XvMC]], providing partial and full hardware offloading of video decoding. This interface is available on Intel graphics. Interface frontends are also available for ATI's XvBA and nVidia's [[VDPAU]]. This interface is supported by MythTV as of 0.25.
  
  
== Enable VAAPI in using Intel Graphics ==
+
== Enable VAAPI ==
  
1. Install necessary packages:
+
You need to install the libva VAAPI library and the related hardware drivers.
 +
 
 +
== Intel Graphics ==
 +
 
 +
Install necessary packages
 +
 
 +
=== Using Ubuntu/Debian ===
  
 
<pre>sudo apt-get install libva1 i965-va-driver libva-intel-vaapi-driver vainfo</pre>
 
<pre>sudo apt-get install libva1 i965-va-driver libva-intel-vaapi-driver vainfo</pre>
  
2. Check to see if newly installed software is working by running <pre>vainfo</pre>  You should see something similar to this: (note, output will be different for those running different versions of the Intel integrated graphics, you are looking for VAEntrypointVLD with some of the codecs)
+
=== Using other distributions ===
  
<pre>vainfo: VA API version: 0.32
+
You can use the official Intel graphic installer available at:
vainfo: Driver version: i965 Driver 0.1
+
https://01.org/linuxgraphics/downloads/2013/intelr-linux-graphics-installer-version-1.0.2
vainfo: Supported profile and entrypoints
+
      VAProfileMPEG2Simple            : VAEntrypointVLD
+
      VAProfileMPEG2Main              : VAEntrypointVLD
+
      VAProfileH264Baseline          : VAEntrypointVLD
+
      VAProfileH264Main              : VAEntrypointVLD
+
      VAProfileH264High              : VAEntrypointVLD
+
      VAProfileVC1Simple              : VAEntrypointVLD
+
      VAProfileVC1Main                : VAEntrypointVLD
+
      VAProfileVC1Advanced            : VAEntrypointVLD</pre>
+
  
3. If your distribution doesn't include recent drivers (0.32 and above is recommended). Install Intel drivers (taken from: step 5 of [http://forum.xbmc.org/showthread.php?tid=114368 GUIDE Simplified Guide for a perfect minimal HTPC on INTEL platforms]):
+
Or build from source:
 +
 
 +
If your distribution doesn't include recent drivers (0.32 and above is recommended). Install Intel drivers (taken from: step 5 of [http://forum.xbmc.org/showthread.php?tid=114368 GUIDE Simplified Guide for a perfect minimal HTPC on INTEL platforms]):
  
 
<pre>cd ~
 
<pre>cd ~
Line 48: Line 47:
 
sudo make install</pre>
 
sudo make install</pre>
  
4. Select VAAPI Playback Profile from Mythfrontend:   
+
 
 +
== Test ==
 +
 
 +
Check to see if newly installed software is working by running <pre>vainfo</pre>  You should see something similar to this: (note, output will be different for those running different versions of the Intel integrated graphics, you are looking for VAEntrypointVLD with some of the codecs)
 +
 
 +
<pre>vainfo: VA API version: 0.32
 +
vainfo: Driver version: i965 Driver 0.1
 +
vainfo: Supported profile and entrypoints
 +
      VAProfileMPEG2Simple            : VAEntrypointVLD
 +
      VAProfileMPEG2Main              : VAEntrypointVLD
 +
      VAProfileH264Baseline          : VAEntrypointVLD
 +
      VAProfileH264Main              : VAEntrypointVLD
 +
      VAProfileH264High              : VAEntrypointVLD
 +
      VAProfileVC1Simple              : VAEntrypointVLD
 +
      VAProfileVC1Main                : VAEntrypointVLD
 +
      VAProfileVC1Advanced            : VAEntrypointVLD</pre>
 +
 
 +
== Configure MythTV for VAAPI ==
 +
 
 +
Select VAAPI Playback Profile from Mythfrontend:   
  
 
Mythfrontend->Setup->Video->Playback->(Screen 3/8)-> Select "VAAPI normal" profile
 
Mythfrontend->Setup->Video->Playback->(Screen 3/8)-> Select "VAAPI normal" profile
  
 
Hit Next until you are back out to the main screen
 
Hit Next until you are back out to the main screen
 +
 +
  
 
Try playing back a recording or another video and you should notice a decrease in CPU usage.   
 
Try playing back a recording or another video and you should notice a decrease in CPU usage.   
  
 
[[Category:Glossary]]
 
[[Category:Glossary]]

Revision as of 07:54, 13 August 2013

Wikipedia-logo-en.png
Wikipedia has an article on:

Video Acceleration API is a successor to XvMC, providing partial and full hardware offloading of video decoding. This interface is available on Intel graphics. Interface frontends are also available for ATI's XvBA and nVidia's VDPAU. This interface is supported by MythTV as of 0.25.


Enable VAAPI

You need to install the libva VAAPI library and the related hardware drivers.

Intel Graphics

Install necessary packages

Using Ubuntu/Debian

sudo apt-get install libva1 i965-va-driver libva-intel-vaapi-driver vainfo

Using other distributions

You can use the official Intel graphic installer available at: https://01.org/linuxgraphics/downloads/2013/intelr-linux-graphics-installer-version-1.0.2

Or build from source:

If your distribution doesn't include recent drivers (0.32 and above is recommended). Install Intel drivers (taken from: step 5 of GUIDE Simplified Guide for a perfect minimal HTPC on INTEL platforms):

cd ~
sudo mkdir Builds
cd Builds
sudo apt-get build-dep libva1
git clone git://anongit.freedesktop.org/vaapi/libva
cd libva
git checkout vaapi-ext
sudo ./autogen.sh --prefix=/usr
sudo make
sudo make install
cd..
git clone git://anongit.freedesktop.org/vaapi/intel-driver
cd intel-driver
git checkout vaapi-ext
wget http://paste.kde.org/184874/raw/ -O ./increase_micro_version.patch
sudo autoreconf -v --install
sudo patch -p1 < ./increase_micro_version.patch
sudo ./configure --prefix=/usr
sudo make
sudo make install


Test

Check to see if newly installed software is working by running
vainfo
You should see something similar to this: (note, output will be different for those running different versions of the Intel integrated graphics, you are looking for VAEntrypointVLD with some of the codecs)
vainfo: VA API version: 0.32
vainfo: Driver version: i965 Driver 0.1
vainfo: Supported profile and entrypoints
      VAProfileMPEG2Simple            : VAEntrypointVLD
      VAProfileMPEG2Main              : VAEntrypointVLD
      VAProfileH264Baseline           : VAEntrypointVLD
      VAProfileH264Main               : VAEntrypointVLD
      VAProfileH264High               : VAEntrypointVLD
      VAProfileVC1Simple              : VAEntrypointVLD
      VAProfileVC1Main                : VAEntrypointVLD
      VAProfileVC1Advanced            : VAEntrypointVLD

Configure MythTV for VAAPI

Select VAAPI Playback Profile from Mythfrontend:

Mythfrontend->Setup->Video->Playback->(Screen 3/8)-> Select "VAAPI normal" profile

Hit Next until you are back out to the main screen


Try playing back a recording or another video and you should notice a decrease in CPU usage.