Difference between revisions of "XvMC"

From MythTV Official Wiki
Jump to: navigation, search
(Prebuffering Pause or stutter with Nvidia)
(Example CPU Savings)
Line 207: Line 207:
 
| 2.93Ghz Celeron D
 
| 2.93Ghz Celeron D
 
| 1Gb DDR 3200
 
| 1Gb DDR 3200
| Nvidia FX 5200
+
| 128M Nvidia FX 5200 AGP w/TV OUT to 800x600 SD TV
 
| SD
 
| SD
 
| 8-12%
 
| 8-12%
Line 215: Line 215:
 
| 0.19
 
| 0.19
 
| SD Playback is smooth and reliable. No complaints!
 
| SD Playback is smooth and reliable. No complaints!
 +
|-
 +
| 2.93Ghz Celeron D
 +
| 2Gb DDR 3200
 +
| 256M Nvidia 6200 AGP w/DVI Out to 1360x768 LCD
 +
| HD 1080i
 +
| 50%
 +
| 100%
 +
| NO
 +
| NO
 +
| 0.19 SVN fixes rev 9591
 +
| OSD is in B&W, but 1080i is smooth and watchable, with the occasional stutter when switching channels on live, or the OSD is on.  Also had to turn on NvAGP to get XvMC working with this video card.  Frontend still complains of the occasional prebuffer pause.  Without XvMC, HD stutters a lot. Using nvidia driver version 8178 because I got kernel panics with 7676 while playing mupen64. OpenGL Vsync broken in this version, so using RTC. Can't reliably run Bob deinterlace because of RTC. XV picture controls ON.
 +
|-
 +
| 2.93Ghz Celeron D
 +
| 2Gb DDR 3200
 +
| 256M Nvidia 6200 AGP w/DVI Out to 1360x768 LCD
 +
| SD
 +
| 14%
 +
| 17%
 +
| NO
 +
| NO
 +
| 0.19 SVN fixes rev 9591
 +
| OSD is in B&W, but SD is smooth and watchable, with a very brief stutter when switching channels on LiveTV.  Also had to turn on NvAGP to get XvMC working with this video card. No prebuffer pauses.  Without XvMC, SD playback is smooth. Using nvidia driver version 8178 because I got kernel panics with 7676 while playing mupen64. OpenGL Vsync broken in this version, so using RTC. Can't reliably run Bob deinterlace because of RTC. XV picture controls ON.
 
|-
 
|-
 
| AMD Athlon XP 2400
 
| AMD Athlon XP 2400

Revision as of 12:10, 4 April 2006

X-Video Motion Compensation, or XvMC, is a part of The X Window System which allows video programs to offload motion compensation and iDCT (Inverse Discrete Cosine Transform) portions of MPEG2 decoding to the GPU hardware. XvMC can greatly reduce CPU utilization when playing back MPEG-2 video. In theory it should also reduce bus bandwidth requirements. Savings will be most dramatic with slow CPUs or when playing HDTV. SDTV will benefit as well, but most modern CPUs can already play back SDTV without XvMC. MythTV can be compiled to use XvMC for native playback. External players such as Xine and Mplayer can also be compiled to support XvMC.

Currently, only MPEG-2 is supported. This is usually a hardware limitation. As an exception, one of the Unichrome chips is capable of XvMC accelerated MPEG-4 playback, but the Unichrome driver doesn't support that functionality at the time of this writing.

Drivers

Each hardware video card capable of XvMC video acceleration requires a software driver to enable these features. Below is a list of the recommended software drivers and driver versions for each supported hardware type.

Nvidia

There are currently two X11 Nvidia drivers available: Open Source and Proprietary Binary. However, most, if not all people running an Nvidia card with MythTV use the binary driver. See below for an explanation of each driver. Recent NVidia cards have support for full MPEG2 offload (iDCT + MC), and even MPEG4 offload not addressed in XvMC. The GeForce4 MX and GeForce FX series cards also support full MPEG2 offload. The GeForce 4 (non-MX) series cards and earlier support only hardware motion compensation, not the more CPU intensive iDCT offload.

Proprietary Binary

Status This driver is full featured and actively maintained and developed directly by Nvidia Corp. Unless otherwise noted, any mention of Nvidia hardware on the MythTV wiki, forums, or mailing lists usually imply the use of the binary Nvidia driver.
Supports XvMC? YES
How to Obtain? This driver is not included with the XOrg X11 Server for licensing reasons. It is available as a third party download. Usually your linux distribution will have a package available in RPM, Deb, ebuild, or other format.
Recommended Version As of 2006-02-16, the currently recommended driver version is: 1.0.7676

Versions above 7676 have broken OpenGL Vsync, at least to 1.0.8178. These later versions are still usable so long as OpenGL Vsync is disabled in mythfrontend's settings. One user, Trevarthan, reports that 8178 prevents a kernel panic while running mupen64.

X11 driver name nvidia
Chipset Availability Nvidia Chipsets are widely available and can be found commonly on PCI, AGP, and PCI-e cards, as well as on motherboards with integrated video, though significantly less common on the latter.

Open Source

Status Basic functionality. Only supports 2D hardware acceleration. (no 3D/OpenGL acceleration)
Supports XvMC? NO
How to Obtain? Included with the XOrg X11 Server.
X11 driver name nv

Unichrome

"Unichrome" is the product name for the onboard graphics of Via chipsets. The Unichrome chips can provide MPEG processing beyond standard XvMC MPEG2 acceleration - VLD (Variable Length Decoder) acceleration. They can provide full MPEG2 decoding (limited, however, to 1024x1024 on non-pro chipsets), allowing MPEG playback with very low CPU requirements.

Status 2D, 3D and Xv supported in Xorg via driver for CLE266, KM400/KN400, K8M800/K8N800, PM800, P4M800, P4M800PRO, and CN400 chipsets. PM8X0 likely but not available yet.
Supports XvMC? YES
How to Obtain? Included in recent versions of Xorg (6.9 and 7.0) (Newer chipsets supported in openchrome-svn first.)
Recommended Version Xorg (6.9 and 7.0)
Chipset Availability A common frustration among MythTV users is that while these chipsets have Open Source drivers available, they aren't available in PCI, AGP, or PCI-e cards. They can only be found on motherboards with integrated video chipsets.
The DeltaChrome graphics cards should fill this gap but aren't widely available yet.

The Xorg via driver includes support for XvMC for both unichrome and unichrome-pro chipsets, however new chipset support is implemented in the openchrome svn first.

Support for MPEG4 and also IDCT/MC acceleration are currently in progress. The OpenChrome project has support for a broad range of chipsets.

Intel 8xx/9xx

The X11 i810 driver supports the full range of Intel integrated graphics chips. These are common in midmarket laptops and also on a number of motherboards. Their graphics capabilities are modest but underestimated by many. A binary driver containing additional functionality is available from Intel but the vast majority of the chipset's features are available from the in-tree driver.

Status Full featured driver. Supports 2D and 3D hardware acceleration.
Supports XvMC? YES (Supports offload of Motion Compensation, but not the more CPU intensive iDCT)
How to Obtain? Included with both the X.Org and XFree86 server software.
Recommended Version Unless you are having problems, use the driver included with your distribution. A "test driver" is available from the maintainer's page. It is updated every few weeks.
X11 driver name i810
Chipset Availability This chipset is used in some DIY motherboard kits but is more common in laptops. It's use in a MythTV setup is less than ideal due to limited decoding capabilities (see above), as well as incomplete TV-Out support in the X.org/XFree86 driver.

ATI Radeon

The ATI display drivers for Linux do not support XvMC. Despite the fact that all Radeon hardware has support for MPEG2 acceleration, ATI has never provided access to these capabilities in Linux.

Application Support

Binary Distributions

The following binary linux distributions support XvMC out of the box:

  • Mandrivia 2006 Free
  • Debian

MythTV

Before MythTV can make use of XvMC hardware support, it first has to be built with XvMC support.

Compiling

For a more hands-on approach, one can compile MythTV directly from source.

Source

XvMC depends upon the 'x11', 'xrandr' and 'xv' choices being enabled in configure. These are enabled by default, but you may want to specifically list them. The configure program checks for the correct libraries and files and the results are listed by the program when it exits.

If compiling manually for either nvidia, I810 or unichrome, use:

./configure --enable-xvmc

If you are compiling for unichrome-pro, use:

./configure --enable-xvmc --enable-xvmc-pro --enable-xvmc-vld

If you have the libXvMCW wrapper installed, then it will be automatically enabled by the configure program and all of the available library assets will be utilized. However, double-check your ./configure output during MythTV configuration state whether it says "yes" after "XvMC support" (or XvMC pro support) or not, since some distributions do not enable XvMC automatically regardless of XvMC library found in /usr/lib.

Gentoo

If installing MythTV on Gentoo Linux, make sure the "nvidia" or "unichrome" USE flags are set. This can usually be set on a per package basis in the following file:

/etc/portage/package.use

Configuration

After MythTV has been installed, it needs to be configured to utilize XvMC.

  1. In MythTV's frontend menus, please navigate to:
    Setup -> TV Settings -> Playback
  2. Next, change the "Preferred MPEG2 Decoder" to "Standard XvMC"
  3. For the Via Unichrome chipset, select "Via XvMC"
  4. Make sure "Extra audio buffering" is checked.

That's it! XvMC should be enabled. Now play a few Recordings and see what happens. If problems occur, check the Tips and Tricks section below for more info.

MPlayer

MPlayer includes an XvMC output plugin. To use it, try this:

mplayer -vo xvmc -vc ffmpeg12mc

(assuming you are running mplayer with XvMC support compiled in)

  • Note - unichrome support in mplayer requires a patch.

Xine

Xine's has two plugins for XvMC support, the first is named xvmc as you would expect, however to take advantage of XvMC acceleration on nVidia graphics cards using the nVidia binary drivers they have a seperate plugin named xxmc (xx instead of xv).

To use Xine with XvMC support for most graphics cards use:

xine -V xvmc 

To use Xine with XvMC support nVidia graphics cards use:

xine -V xxmc 

(assuming, of course, that xine has been compiled with XvMC support.)

Example CPU Savings

CPU RAM Video Card Content CPU w/XvMC CPU w/o XvMC XvMC Deinterlace Non-XvMC Deinterlace MythTV Version Notes
1 Ghz AMD TBird 256MB DDR 64MB GeForce4 MX 440 HD (1080i) 65-70% 100% Bob Bob LFS & compiled .19 fixes branch OSD is in B&W, but 1080 is smooth and watchable, with the occasional stutter when switching channels on live, or the OSD is on. Frontend still complains of the occasional prebuffer pause. Without XvMC, HD stutters a lot.
2 Ghz Celeron 512MB DDR 128MB NVidia 6200 AGP 8X HD (1080i) 65-70% 100% Bob Bob FC4 & ATRPMS 0.18.1 / LFS & compiled .19 fixes branch OSD is in B&W, but 1080 is smooth and watchable, with the occasional stutter when switching channels on live, or the OSD is on. Also had to turn on NvAGP to get XvMC working with this video card. Frontend still complains of the occasional prebuffer pause. Without XvMC, HD stutters a lot.
2 Ghz Celeron 512MB DDR 64MB GeForce4 MX 440 SD 12-14% 22-24% Bob Bob ATRPMS 0.18.1 AverMedia M179 tuner card, NVidia driver 7676, OSD is B&W
2.93Ghz Celeron D 1Gb DDR 3200 128M Nvidia FX 5200 AGP w/TV OUT to 800x600 SD TV SD 8-12% 10-14% NO NO 0.19 SD Playback is smooth and reliable. No complaints!
2.93Ghz Celeron D 2Gb DDR 3200 256M Nvidia 6200 AGP w/DVI Out to 1360x768 LCD HD 1080i 50% 100% NO NO 0.19 SVN fixes rev 9591 OSD is in B&W, but 1080i is smooth and watchable, with the occasional stutter when switching channels on live, or the OSD is on. Also had to turn on NvAGP to get XvMC working with this video card. Frontend still complains of the occasional prebuffer pause. Without XvMC, HD stutters a lot. Using nvidia driver version 8178 because I got kernel panics with 7676 while playing mupen64. OpenGL Vsync broken in this version, so using RTC. Can't reliably run Bob deinterlace because of RTC. XV picture controls ON.
2.93Ghz Celeron D 2Gb DDR 3200 256M Nvidia 6200 AGP w/DVI Out to 1360x768 LCD SD 14% 17% NO NO 0.19 SVN fixes rev 9591 OSD is in B&W, but SD is smooth and watchable, with a very brief stutter when switching channels on LiveTV. Also had to turn on NvAGP to get XvMC working with this video card. No prebuffer pauses. Without XvMC, SD playback is smooth. Using nvidia driver version 8178 because I got kernel panics with 7676 while playing mupen64. OpenGL Vsync broken in this version, so using RTC. Can't reliably run Bob deinterlace because of RTC. XV picture controls ON.
AMD Athlon XP 2400 512mb DDR 3200 Nvidia FX 6200 HD (1080i) 20-25% 80% BOB Unknown 0.18 of course XvMC still likes to lock on "prebuffer" a lot
AMD Athlon XP 1600 1GB DDR Nvidia 6800LE SD 15% 25% Unknown Unknown N/A, tested with MPlayer
AMD Athlon 800 768MB PC100 Nvidia Geforce4 MX440 SD 15%-20% 45-50% Bob/Kernel Kernel 0.18.1 A little jumpy for ~15 seconds after entering LiveTV/Recording, then smooth.
VIA C3 Nehemiah 1GHz 20% Unknown Unknown Unknown can hardly play mpeg2 without XvMC
Intel P4 2.26 HD 50% 95%+ Unknown Unknown Unknown
AMD 2500+ 1GB FX5500 256MB HD 50% 99%+ Unknown Unknown Unknown
Via C3 Nehemiah 1.33GHz 1GB VIA CN400 SD 25% 90% Bob Unknown 0.18.2, 0.19
Athlon XP 2000+ 512MB PC2700 GeForce4 MX440 SD 13%-19% 25%-28% NO NO 0.18.1
Athlon XP 2000+ 512MB PC2700 GeForce4 MX440 HD 52%-62% 99%+ NO NO 0.18.1
Athlon 64 3200+ 768MB PC2700 GeForce FX 5200 HD 720P 20% 51% Bob No Pre 0.19 SVN Running in 64 bit mode, with NVidia 7676 driver
Athlon 64 3200+ 768MB PC2700 GeForce FX 5200 HD 1080i 42% 70% Bob No Pre 0.19 SVN Running in 64 bit mode, with NVidia 7676 driver
Athlon 3200+ 512MB PC3200 GeForce FX 5500 HD 1080i 45% 100% Bob Bob Pre 0.19 SVN (8922) 720p Playback with NVidia 7676 driver. Significant stuttering w/o XvMC.
Athlon XP 2800+ 512 MB 3200 GeForce4 MX440 SD 7%-8% 9%-10% Bob Bob 0.19 Gentoo kernel 2.6.15 with NVidia 7676 driver. Tried 8178 driver, but CPU usage went to 85%
P4 @ 2.67GHz 512 MB PC 3200 FX 5200 HD 1080i 45% 95% Bob Bob 0.19 FC3 ATRPMS NVidia 7676. Unwatchable without XVMC; slight, but occasionally noticable audio stutter with XVMC.
Sempron64 2500 256 MB PC 3200 FX 5200 HD 30% 90% Bob Bob 0.19 FC4 i386 build (still can't get x64 build to install properly). 1080 content unwatchable without XVMC, 720 / 480 content watchable w/o XVMC. With XVMC: 1080 watchable while also recording two additional 1080 channels.
AMD Athlon(tm) XP 1900+ 512 MB NV25 [GeForce4 Ti 4400] SD 55% 44% Bob Kernel 0.19 Debian Unstable Nvidia 8178. Picture stuttered after 0.18.1 -> 0.19 upgrade, tried XvMC fixes picture, but uses more CPU (?) Using ChromaKey Hack with success. Prebuffer pause only at begining of watching TV.
AMD Duron(tm) 950 512MB GeForce4 MX 440 AGP 8x SD 12-14% 28-32% No No 0.19 Slackware 10.2 I needed to add a newer version of the X11-devel package to get the xvmc include files.
(Please add your example Hardware stats here!)

Tips and Tricks

XvMC sounds like a dream come true for those wanting to play HD content with a slower system, but unfortunately it's not always perfect. Even with XvMC and low CPU usage, many still experience problems with prebuffering pauses, mild to moderate audio or video stuttering, problems with the OSD, and other issues. If their CPU is fast enough, many simply turn off XvMC as a last resort. But this guide hopes to help the reader make the most of XvMC and avoid frustration. Here are some suggestions that may help:

Prebuffering Pause or stutter with Nvidia

  • Try disabling OpenGL VSync (this is a parameter that you can set when compiling mythtv from source - it defaults to off in v0.19)
  • Try setting this in your "Device" section in your xorg.conf:
Option "NVAGP" "1"

OSD Flicker

If you are using MythTV version 0.18 and you experience severe OSD stutter or flicker when XvMC is enabled, try upgrading to 0.19. The OSD flicker is fixed for the author in 0.19 with an Nvidia FX 5200.

Greyscale OSD (NVidia 4 & 5)

MythTV version 0.19 ships with a hack to enable full color OSD with XvMC enabled on Nvidia 4 & 5 series cards ONLY.
(i.e. Nvidia FX 5200 is a 5 series card, 6000 is a 6 series card)

WARNING: if you have a non-nvidia card or an nvidia 6 or 7 series card this hack won't help. The nvidia 6 and 7 series cards lack the chroma keying and color & contrast adjust features that the older 4 and 5 series cards had. That is why this guide refers to this feature in 0.19 as a "hack".
(Thanks to Daniel Kristjansson, the author of the chromakey code, for this info!)

If you have an nvidia 4 or 5 series card, please read on:
The hack is disabled by default. The code change is described here.

To enable the hack under 0.19, do this:

  • Make a change to your xorg.conf file. Add this to your Devices section:
Option "XvmcUsesTextures" "false" 
  • Make a change to the "settings" table in MythTV's MySQL database. You can access your MySQL mythconverg database from the command line like this:
mysql -u root -p mythconverg

You will be prompted for a password. If you don't remember setting one up, try just pressing the ENTER key.

Here is the SQL statement you should use to make the change:

INSERT INTO settings SET value='UseChromaKeyOSD',data='1',hostname='yourhost';

But change 'yourhost' to the hostname that your frontend is running on. If you're not sure what your hostname is, run `hostname` on the command line to find out.

  • Now restart X11 (for the xorg.conf change to take effect) and your frontend (for the SQL change to take effect) and see if it works!

Greyscale OSD (Unichrome)

The hack for Nvidia cards described above and shipped with MythTV version 0.19 will also work if you are using a Unichrome chipset. The hack has been verified on a Via EPIA M10000 board with the CLE266 chipset with viaXvMC enabled.

Caveats

  • BOB is the only Deinterlacing method that works with XvMC.
  • Picture in Picture, or PiP, doesn't work with XvMC.


Alternatives

There are alternative methods for hardware assisted MPEG-2 playback of standard definition video:


External Links