Difference between revisions of "ATI Proprietary Driver"
(Link to XorgConfMonitorSectionForTV) |
m (markup) |
||
| Line 20: | Line 20: | ||
For users experiencing black-and-white TV output: please verify if the TVFormat option is set to the one valid for your country. All ATI cards I have seen default to the American TVStandard 'NTSC'. For a mythtv box in the Netherlands use the following option in the Device section in xorg.conf:<br> | For users experiencing black-and-white TV output: please verify if the TVFormat option is set to the one valid for your country. All ATI cards I have seen default to the American TVStandard 'NTSC'. For a mythtv box in the Netherlands use the following option in the Device section in xorg.conf:<br> | ||
<code>Option "TVFormat" "PAL-B"</code> | <code>Option "TVFormat" "PAL-B"</code> | ||
| + | |||
| + | --- | ||
Please configure the 'Monitor' section of your xorg.conf to support a TV as monitor. See [[XorgConfMonitorSectionForTV]]. | Please configure the 'Monitor' section of your xorg.conf to support a TV as monitor. See [[XorgConfMonitorSectionForTV]]. | ||
[[Category:Video display cards]] | [[Category:Video display cards]] | ||
Revision as of 17:14, 20 November 2006
At least you need the fglrx driver from the ATI website, and a videocard that is supported with that driver.
My experiences are with driver revision 8.28.8:
- ATI Radeon 9200SE (both composite and S-Video): partially works.
- ATI Radeon 9250 (composite): partially works.
ATI proprietary drivers do have a bug in them which makes the combination of VideoOverlaying and TV-Out useless. If you have a display attached to the vga output connector, you will find the VideoOverlay mode fully functional. However when the TV-Out connector is used, you will see the top-half of the actual TV/DVD signal. Disabling this feature in the xorg.conf file (or use OpenGLOverlay instead) gives the whole TV/DVD signal, but may work slowly depending on the overall speed of the system you are using.
When having a computer monitor attached, use the following in the Device section of xorg.conf:
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
However, when using the TV-Out connector of the card use this instead (again, may be slow on your system, but gives _complete_ output):
Option "VideoOverlay" "off"
Option "OpenGLOverlay" "on"
Turning both on does not work (strange but true...)
On my personal (Athlon XP 1800+) mythtv system the TV/DVD playback functions are too slow, even with OpenGLOverlay mode active on the binary drivers. So for normal TV-Out functionality I went to the store and bought a NVidia card instead. My desktop system however (the 2nd mythfrontend :-) still functions perfectly with a ATI Radeon 9200SE. Attached to a monitor and with VideoOverlay active...
For users experiencing black-and-white TV output: please verify if the TVFormat option is set to the one valid for your country. All ATI cards I have seen default to the American TVStandard 'NTSC'. For a mythtv box in the Netherlands use the following option in the Device section in xorg.conf:
Option "TVFormat" "PAL-B"
---
Please configure the 'Monitor' section of your xorg.conf to support a TV as monitor. See XorgConfMonitorSectionForTV.
