Difference between revisions of "Deinterlacing"
m (Removed first person reference) |
|||
| Line 29: | Line 29: | ||
* Greedyh | * Greedyh | ||
| − | + | {{Note box|If using a Nvidia TV output (composite/svideo) & watching PAL/NTSC signals there should be no need to deinterlace video because the TV output's flicker filter's default setting (of 127) makes interlaced material look perfectly natural - exhibited on FX5200 svideo output - YMMV.}} | |
| − | |||
| − | If using a Nvidia TV output (composite/svideo) & watching PAL/NTSC signals there should be no need to deinterlace video because the TV output's flicker filter's default setting (of 127) makes interlaced material look perfectly natural - exhibited on FX5200 svideo output - YMMV. | ||
[[Category:Glossary]] | [[Category:Glossary]] | ||
Revision as of 22:20, 27 November 2008
Outdated: The information on this page may no longer be relevant to the current release of MythTV, 35.0. Please consider helping to update it. This page was last modified on 2008-11-27.
MythTV Deinterlacing
Deinterlacing is the process of converting traditional Interlaced Video into a Progressive Picture that can be displayed on modern non interlaced display devices such as LCD or Plasma screens.
There is a lot of general information on deinterlacing at Wikipedia in these two articles:
MythTV has several options for Deinterlacing. The configuration options for deinterlacing can be found under Mythfrontend->Utilities Setup->Setup->TV Settings->Playback. On Playback Profiles (3/9) edit each entry, The Primary and Fallback deinterlacer may be set on the 2nd sub-page.
- Linear Blend
- Kernel (Less Motion Blur)
- This requires SSE support compiled into your Kernel
- Bob 2X Framerate
- This requires Xv or XvMC video acceleration
- This is also called Line Doubling and more information can be seen here (under line doubling):http://en.wikipedia.org/wiki/Deinterlacing#Deinterlacing_methods
- One Field
- yadif, something apparently Michael Niedermayer wrote for mplayer/ffmpeg that's fast but more CPU intensive than above
- Greedyh
Note: If using a Nvidia TV output (composite/svideo) & watching PAL/NTSC signals there should be no need to deinterlace video because the TV output's flicker filter's default setting (of 127) makes interlaced material look perfectly natural - exhibited on FX5200 svideo output - YMMV.
