Snd-bt87x

Note: The correct title of this article is snd-bt87x. It appears incorrectly here due to technical restrictions.

What Is It?

snd-bt87x is a Linux kernel driver for the Advanced Linux Sound Architecture (ALSA). It allows you to capture digitized sound directly from a bt87x capture card, without hooking it to your sound card.

For more information of bt87x capture cards, see bttv.

For a more generic overview of TV audio-over-PCI, including other (non-bttv) analog cards, see PCI TV audio.

Installing the Module

To use the snd-bt87x driver, the driver module needs to be installed. To see if your Linux distribution has already installed it, try

# find /lib/modules/`uname -r` -name 'snd[-_]bt87x*'

If it returns a filename, the module is installed. If it doesn't, you will have to get it installed. To do that, you will probably have to do one of the following:

• install it from a package included with your Linux distribution
• build it from the kernel source code included with your Linux distribution
• build it from the ALSA source code (available at http://www.alsa-project.org)

Loading the Module

Once the module is installed, it needs to be loaded. To see if your Linux distribution has already loaded it, try

<code># lsmod | grep 'snd[-_]bt87x'

If it returns one or more lines, the module is already loaded. If not, you will need to load it yourself. To do that, try

# modprobe snd-bt87x

If it doesn't give you any errors, use the lsmod command above to see if it's loaded.

Making Sure the Module Saw Your bttv Card

COMPLETE ME

Making Your System Loads the Module When it Boots

COMPLETE ME

Using the Module

COMPLETE ME

---

Card Specific Information

• ATI TV Wonder
  • I have a plain ATI TV Wonder and snd-bt87x was loading, but not seeing the card. To get it

Distribution Specific Information

• Mandriva Linux 2007