DVB-S does not work because LNB is not setup

From MythTV Official Wiki
Revision as of 10:47, 3 May 2009 by Ndy (talk | contribs) (New page: If you see error messages like the following in the output from mythbackend when it is started: DiSeqCDevTree, Warning: No device tree for cardid 9 DVBChan(9:1) Warning: Your frequency ...)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

If you see error messages like the following in the output from mythbackend when it is started:

DiSeqCDevTree, Warning: No device tree for cardid 9
DVBChan(9:1) Warning: Your frequency setting (11836500) is out of range. (min/max:950000/2150000)
DiSeqCDevTree, Error: No root device tree node!
DVBChan(9:1) Error: tune(): Failed to setup DiseqC devices
DVBChan(9:1) Error: setChannelByString(51): Tuning to frequency.

Then it is probably caused by the LNB not being setup for the DVB-S card. Use mythtvsetup to select LNB as DiSeqC for that card even if you do not have a DiSeqC!