Difference between revisions of "DVICO-Ultraview Install in Australia"

From MythTV Official Wiki
Jump to: navigation, search
Line 824: Line 824:
 
      
 
      
 
     end remote
 
     end remote
 +
 +
~mythtv/.lircrc: Set as follows (for the Dvico Dual Tuner):
 +
 +
    # lircrc.example.DVICO-nativelirc
 +
    # 2004-07-04, Chris Pascoe
 +
    # mailto:linuxdvb@itee.uq.edu.au
 +
    # Save this file in ~/.mythtv/lircrc
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = power
 +
        config = Esc
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = Go
 +
    # Swap the PiP windows
 +
        config = N
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = 1
 +
        config = 1
 +
        config = return
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = 2
 +
        config = 2
 +
        config = return
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = 3
 +
        config = 3
 +
        config = return
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = 4
 +
        config = 4
 +
        config = return
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = 5
 +
        config = 5
 +
        config = return
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = 6
 +
        config = 6
 +
        config = return
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = 7
 +
        config = 7
 +
        config = return
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = 8
 +
        config = 8
 +
        config = return
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = 9
 +
        config = 9
 +
        config = return
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = back
 +
        config = Esc
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = 0
 +
        config = 0
 +
        config = return
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = info
 +
        config = I
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = guide
 +
        config = S
 +
    end
 +
   
 +
    begin
 +
      prog = mythtv
 +
    # This is the Red key
 +
    # We'll use it for "Delete"
 +
      button = red
 +
      config = D
 +
    end
 +
   
 +
    # Note the "repeat =" strings in the volume and channel.
 +
    # This means that if you hold down the key, every nth instance will be
 +
    # passed.  This depends on your system, so you may want to increase or
 +
    # decrease this and see what happens.  repeat = 1 is probably too
 +
    # fast.
 +
   
 +
    begin
 +
      prog = mythtv
 +
      button = voldown
 +
      repeat = 2
 +
      config = F10
 +
    end
 +
   
 +
    begin
 +
      prog = mythtv
 +
      button = volup
 +
      repeat = 2
 +
      config = F11
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = chup
 +
        config = Up
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = chdown
 +
        config = Down
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = up
 +
    # This is the "up" on the central diamond
 +
        config = Up
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = down
 +
    # This is the "down" on the central diamond
 +
        config = Down
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = left
 +
    # This is the "left" on the central diamond
 +
        config = Left
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = right
 +
    # This is the "right" on the central diamond
 +
        config = Right
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
    # Middle button on the diamond
 +
        button = ok
 +
        config = Return
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = start
 +
        config = Return
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = mute
 +
        config = |
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = playpause
 +
        config = ctrl+p
 +
    end
 +
   
 +
    begin
 +
      prog = mythtv
 +
    # Change focus for PiP (to change channel in the other window)
 +
      button = atvdtv
 +
      config = B
 +
    end   
 +
   
 +
    begin
 +
      prog = mythtv
 +
    # Toggle PiP on/off
 +
      button = zoom
 +
      config = V
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = rew
 +
        config = Left
 +
    #    config = seek -180
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = stop
 +
        config = P
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = ff
 +
        config = Right
 +
    #    config = seek +180
 +
    end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = record
 +
        config = R
 +
    end
 +
   
 +
    #begin
 +
    #  prog = mythtv
 +
    ## Teletext
 +
    #  button = stop
 +
    #  config = T
 +
    #end
 +
   
 +
    begin
 +
        prog = mythtv
 +
        button = camera
 +
        config = P
 +
    end
 +
   
 +
    begin
 +
      prog = mythtv
 +
      button = replay
 +
    # Use for backwards commercial skip
 +
      config = Q
 +
    end
 +
   
 +
    begin
 +
      prog = mythtv
 +
      button = skip
 +
    # Use for forward commercial skip
 +
      config = Z
 +
    end
 +
   
 +
    begin
 +
      prog = mythtv
 +
      button = dvd
 +
      config = Ctrl+D
 +
    end
 +
   
 +
    begin
 +
      prog = mythtv
 +
      button = mp3
 +
      config = Ctrl+M
 +
    end
 +
   
 +
    begin
 +
      prog = mythtv
 +
      button = aspect
 +
      config = W
 +
    end   
 +
   
 +
    begin
 +
      prog = mythtv
 +
      button = dvhs
 +
      config = c
 +
    end
 +
   
 +
    # Xine
 +
   
 +
    begin
 +
      prog = xine
 +
      button = playpause
 +
      repeat = 3
 +
      config = Play
 +
    end
 +
   
 +
    begin
 +
      prog = xine
 +
      button = stop
 +
      repeat = 3
 +
      config = Pause
 +
    end
 +
   
 +
    begin
 +
      prog = xine
 +
      button = back
 +
      config = Quit
 +
    end
 +
   
 +
    begin
 +
      prog = xine
 +
      button = tv_onoff
 +
      config = Quit
 +
    end
 +
   
 +
    begin
 +
      prog = xine
 +
      button = right
 +
      repeat = 3
 +
      config = SeekRelative+10
 +
    end
 +
   
 +
    begin
 +
      prog = xine
 +
      button = left
 +
      repeat = 3
 +
      config = SeekRelative-10
 +
    end
 +
   
 +
    begin
 +
      prog = xine
 +
      button = ff
 +
      repeat = 3
 +
      config = SeekRelative+30
 +
    end
 +
   
 +
    begin
 +
      prog = xine
 +
      button = rew
 +
      repeat = 3
 +
      config = SeekRelative-30
 +
    end
 +
   
 +
    begin
 +
      prog = xine
 +
      button = skip
 +
      repeat = 3
 +
      config = SeekRelative+300
 +
    end
 +
   
 +
    begin
 +
      prog = xine
 +
      button = replay
 +
      repeat = 3
 +
      config = SeekRelative-300
 +
    end
 +
   
 +
    begin
 +
      prog = xine
 +
      button = up
 +
      repeat = 1
 +
      config = EventUp
 +
    end
 +
   
 +
    begin
 +
      prog = xine
 +
      button = down
 +
      repeat = 1
 +
      config = EventDown
 +
    end
 +
   
 +
    begin
 +
      prog = xine
 +
      button = ok
 +
      repeat = 0
 +
      config = EventSelect
 +
    end
 +
   
 +
    begin
 +
      prog = xine
 +
      button = guide
 +
      repeat = 0
 +
      config = Menu
 +
    end
 +
   
 +
    begin
 +
      prog = xine
 +
      button = setup
 +
      repeat = 0
 +
      config = Menu
 +
    end
 +
   
 +
    begin
 +
      prog = xine
 +
      button = volup
 +
      repeat = 1
 +
      config = Volume+
 +
    end
 +
   
 +
    begin
 +
      prog = xine
 +
      button = voldown
 +
      repeat = 1
 +
      config = Volume-
 +
    end
  
  

Revision as of 11:06, 16 November 2006

Background

The following text represents my working notes, made when I updated my analogue (PVR-350 based) mythtv box to use a Ultraview DVB-T (which is basically a DViCO DVB-T re-badged).

These notes have also been edited by Richard Dale who uses two DViCO FusionHDTV DVB-T Plus cards on FC4 in Melbourne, and Warwick Allison with slightly newer/different cards.

There are also notes for DViCO FusionHDTV DVB-T Dual Tuner cards.

These notes do *not* apply to the DVICO "Lite" cards (Warwick never got those to actually work, but Dane Allison did).

Before you Start

This assumes that you've followed the Fedora Myth(TV)ology HOWTO guide on Fedora Core 3 or Fedora Core 4.

For other distributions, YMMV, but things should be reasonably close.

I have also included some notes for Ubuntu Breezy that should help.

Card Source

I picked up my Ultraview card from AB&T in Philip, Canberra (Australia) - just under 200ish. Belconnen should have some also - apparently they're fairly easy to find around Canberra as of Nov 2005.

Hardware

When installing your card, ensure that you plug the ultraview/dvico audio-out port into the CD-in port (or AUX, if you have one), on your sound card. This is an on-card port in both cases - not one of the ones at the rear that you can access from outside your computer. A suitable cable is supplied with the Ultraview.

The "DViCO FusionHDTV DVB-T Dual Tuner" card has two tuners. One is PCI, the other is USB. You will either need to connect an external USB cable to your card, or use the supplied internal USB cable which connects to your motherboard.

Kernel / Packages

Older kernels may not have the drivers required, so update to the most recent kernel available using: 

yum update

For the Ultraview card on FC3 with 2.6.12, Kudzu will automatically add an entry into /etc/modprobe.conf for you for the card, which should look like this: 

   alias char-major-81 cx8800

On the Ultraview card on FC3 with 2.6.12 you will need to force the cx88xx module into DVICO mode by adding the following like 

   options cx88xx card=21

On FC4, kernel 2.6.15 and the DViCO FusionHDTV cards I didn't need to make any changes to modprobe.conf but did need to add the following lines to the start function of /etc/rc.d/init.d/mythbackend 

/sbin/modprobe video-buf-dvb
/sbin/modprobe cx88-dvb

For Ubuntu Breezy, modify the file /etc/modprobe.d/aliases, and change the line: 

 alias char-major-81 videodev

to: 

 alias char-major-81 cx8800

Also, create a file /etc/modprobe.d/dvico with the following contents: 

 options cx88xx card=21

Breezy users will also want to use 'EasyUbuntu' to pull back the appropriate multimedia packages (win32codecs, etc). Once done, add the following to your /etc/apt/sources.list:

deb http://deb.thehunter.ws/ breezy mythtv-stable

  1. deb-src http://deb.thehunter.ws/ breezy mythtv-stable

.. and install the appropriate mythtv packages.

(Note: If you manually compile your kernel, 2.6.12 has a known bug related to tuning: http://www.linuxtv.org/pipermail/linux-dvb/2005-July/003197.html )

DViCO Dual Tuner

For those with a revision 1.4 or later board, Chris Pascoe has just released (August 2006) an update to make it work.

I have confirmed it working on FC5 with a 2.6.17.8 vanilla kernel, and others have tested it to be working on other combinations.

It's part of the v4l-dvb sources. You will need to get the latest mercurial sources, and compile them. Most distros have mecurial available as extras (e.g. yum install mercurial). They recommend you use a vanilla kernel (i.e. one from www.kernel.org) and compile it yourself. In either cace, you'll need the kernel source. FC5 kernel soruce may be downloaded using yum install kernel-devel.

The instructions are quite easy to follow. Find them at http://www.linuxtv.org and look for the "DVB CVS/Mercurial" on the sidebar.

In addition to the v4l-dvb drivers, the USB tuner (it has both PCI and USB tuners) needs the correct firmare to operate.

If you do not have the firmware (FC5 does not ship with it, not sure if any others do), there is a script in the kernel documentation to get it: 

 cd /usr/src/linux-2.6.17.8/Documentation/dvb/   # Modify for soruce directory, if nessessary
 chmod 777 get_dvb_firmware
 ./get_dvb_firmware bluebird

And you'll need to copy it to one of the following two places, depending on your distro: 

 cp dvb-usb-bluebird-01.fw /usr/lib/hotplug/firmware/dvb-usb-bluebird-01.fw   # OR
 cp dvb-usb-bluebird-01.fw /lib/firmware/dvb-usb-bluebird-01.fw   # This one for FC5

Alsa

Ensure that your 'CD' device on your sound card is enabled as a 'capture' device. Run: alsamixer, press F4 to switch to the 'Capture' options. Move to 'CD' and press 'space' to set CD as a capture device. Press F3 to jump back to 'Playback' and set the CD volume to 100%.

Permissions

For Fedora, add to /etc/security/console.perms: 

   # Mythtv permissions
   <dvb>=/dev/dvb/adapter?/*
   <console> 0660 /dev/lirc0 0660 root.uucp
   <console> 0660 <dvb> 0660 root.root

Reboot. This will allow the mythtv user (or whoever logs into the console) to access the card, rather than restricting it to root only.

For Ubuntu Breezy, add the 'mythtv' user to the following groups in /etc/group: 

 cdrom, audio, video, plugdev

Tuner

Go to http://www.dba.org.au/index.asp?sectionID=22, put in your post-code (eg: 2902) Select the region that is closest to you (eg: Tuggeranong Hill) Note down the "middle frequency" for each channel. Convert it to HZ by multiplying by 1000000 (788.5 becomes 788500000).

tv_grab_au_reg

Option 1

Download tv_grab_au_reg, and follow the instructions from http://www.cse.unsw.edu.au/~willu/xmltv/tv_grab_au_reg.html

Note the new grabber can obtain data from both Oztivo and ICE

Note: I fired up phpmyadmin at this point, and threw the xmlid into the channels table (I didn't follow the above instructions exactly) - I suspect you won't need to do this, so I won't go into significant detail.

Note: once you create the "video source".xml file you will need to update the registration/password details as per your http://www.tvguide.org.au/ userid/passwd and configure your channels in the file as well

Option 2

Alternatively, you can use the tv_grab_au script from imir which downloads the channel guide from NineMSN, which is surprisingly accurate. http://www.immir.com/tv_grab_au

MythTV Setup

Run mythtvsetup

Set up the 'General' options as appropriate

Define a new Capture card, and configure it as a "Digital Video Broadcast Card (DVB)" The DVB Card Number, is generally '0', but may be different on your system.

If you have the Dual Tuner card you will have a DVB Card Number '1' as well as '0'. Add this as a second card.

Once you have the correct Card type, and card number, the 'Card Name' and 'Type' should show appropriate values. Under Advanced -> Recording Options: Check 'Use Hardware MPEG Encoder' Finish

Video Sources -> New Video Source Video Source Name: HDTV Tuner (this name can be pretty-much arbitrary) XMLTV Listings Grabber: Australia Channel frequency table: default

Input Connections: Set DVB0 to a video source of 'HDTV Tuner'. If you have the Dual Tuner card set DVB1 to a video source of 'HDTV Tuner' as well.

Channel Editor

Go to 'Advanced' (Note: the 'm' key will allow you to edit/delete stuff in this submenu) Select 'New Transport' Enter each frequency you found above (in Hz). Select a Bandwidth of 7Hz

Select 'scan for channels' Change 'scan type' to 'Existing transport scan' Select each transport in turn, and Scan. Channels should be added to the main listing once they're found.

NOTE: This process didn't want to work for me under 0.19. I later worked out though, that I didn't have the 'timeout' settings set to an acceptable value. Try at least doubling the default values, and you should be fine. However, channel frequencies for Kambah/Tuggeranong are provided here if you need them: 

   INSERT INTO `channel` VALUES (1002, '2', '31', 1, 'ABC TV Canberra', 'ABC TV Canberra', '/home/mythtv/.mythtv/channels/abc.png', NULL, , 'ABC-Can', 0, 32768, 32768, 32768, 32768, 'Default', 0, 1, , 0, 1, 529, 0);
   INSERT INTO `channel` VALUES (1021, '21', '31', 1, 'ABC2', 'ABC2', '/home/mythtv/.mythtv/channels/abc.png', NULL, , 'ABC2', 0, 32768, 32768, 32768, 32768, 'Default', 0, 1, , 0, 1, 530, 0);
   INSERT INTO `channel` VALUES (1022, '22', '31', 1, 'ABC TV', 'ABC TV', '/home/mythtv/.mythtv/channels/abc.png', NULL, , , 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, , 0, 1, 531, 0);
   INSERT INTO `channel` VALUES (1020, '20', '31', 1, 'ABC HDTV', 'ABC HDTV', '/home/mythtv/.mythtv/channels/abc.png', NULL, , , 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, , 0, 1, 848, 0);
   INSERT INTO `channel` VALUES (3374, '2374', NULL, 1, 'PRIME Canberra', 'PRIME Canberra', '/home/mythtv/.mythtv/channels/prime.png', NULL, , 'Prime-Can', 0, 32768, 32768, 32768, 32768, 'Default', 0, 1, , 0, 6, 2374, 0);
   INSERT INTO `channel` VALUES (3400, '2400', NULL, 1, 'PRIME HD', 'PRIME HD', '/home/mythtv/.mythtv/channels/prime.png', NULL, , , 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, , 0, 6, 2400, 0);
   INSERT INTO `channel` VALUES (3401, '2401', NULL, 1, 'PRIME View 1', 'PRIME View 1', '/home/mythtv/.mythtv/channels/prime.png', NULL, , , 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, , 0, 6, 2401, 0);
   INSERT INTO `channel` VALUES (3402, '2402', NULL, 1, 'PRIME View 2', 'PRIME View 2', '/home/mythtv/.mythtv/channels/prime.png', NULL, , , 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, , 0, 6, 2402, 0);
   INSERT INTO `channel` VALUES (3403, '2403', NULL, 1, 'PRIME View 3', 'PRIME View 3', '/home/mythtv/.mythtv/channels/prime.png', NULL, , , 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, , 0, 6, 2403, 0);
   INSERT INTO `channel` VALUES (1030, '30', NULL, 1, 'SBS HD', 'SBS HD', '/home/mythtv/.mythtv/channels/sbs.png', NULL, , , 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, , 0, 3, 848, 0);
   INSERT INTO `channel` VALUES (1003, '3', NULL, 1, 'SBS DIGITAL 1', 'SBS DIGITAL 1', '/home/mythtv/.mythtv/channels/sbs.png', NULL, , 'SBS-Can', 0, 32768, 32768, 32768, 32768, 'Default', 0, 1, , 0, 3, 849, 0);
   INSERT INTO `channel` VALUES (1033, '33', NULL, 1, 'SBS DIGITAL 2', 'SBS DIGITAL 2', '/home/mythtv/.mythtv/channels/sbs.png', NULL, , 'SBS-NEWS', 0, 32768, 32768, 32768, 32768, 'Default', 0, 1, , 0, 3, 850, 0);
   INSERT INTO `channel` VALUES (1031, '31', NULL, 1, 'SBS EPG', 'SBS EPG', '/home/mythtv/.mythtv/channels/sbs.png', NULL, , , 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, , 0, 3, 851, 0);
   INSERT INTO `channel` VALUES (1001, '1', NULL, 1, 'WIN TV Canberra', 'WIN TV Canberra', '/home/mythtv/.mythtv/channels/win.png', NULL, , 'WIN-Can', 0, 32768, 32768, 32768, 32768, 'Default', 0, 1, , 0, 5, 1, 0);
   INSERT INTO `channel` VALUES (1010, '10', NULL, 1, 'WIN TV HD', 'WIN TV HD', '/home/mythtv/.mythtv/channels/win.png', NULL, , , 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, , 0, 5, 10, 0);
   INSERT INTO `channel` VALUES (3055, '2055', NULL, 1, 'SC10 Canberra', 'SC10 Canberra', '/home/mythtv/.mythtv/channels/10.png', NULL, , 'Ten-Can', 0, 32768, 32768, 32768, 32768, 'Default', 0, 1, , 0, 4, 2055, 0);
   INSERT INTO `channel` VALUES (3087, '2087', NULL, 1, 'SC10 HD', 'SC10 HD', '/home/mythtv/.mythtv/channels/10.png', NULL, , , 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, , 0, 4, 2087, 0);



   INSERT INTO `dtv_multiplex` VALUES (1, 1, 529, 4112, 746500000, '1', NULL, NULL, NULL, 'qam_16', '7', '1/2', '8', '1/16', 0, 'qam_64', 'n', '3/4', 'dvb', 16, '20060218194836');
   INSERT INTO `dtv_multiplex` VALUES (2, 1, NULL, NULL, 774500000, '0', NULL, NULL, NULL, 'qam_16', '7', 'Auto', '8', 'auto', 0, 'qam_64', 'n', 'Auto', 'dvb', 33, '20060218195323');
   INSERT INTO `dtv_multiplex` VALUES (3, 1, NULL, NULL, 732500000, 'a', NULL, 'auto', NULL, 'auto', '7', 'auto', 'a', 'auto', 0, 'auto', 'a', 'auto', 'dvb', 33, '20060218201128');
   INSERT INTO `dtv_multiplex` VALUES (4, 1, NULL, NULL, 767500000, 'a', NULL, 'auto', NULL, 'auto', '7', 'auto', 'a', 'auto', 0, 'auto', 'a', 'auto', 'dvb', 33, '20060218201158');
   INSERT INTO `dtv_multiplex` VALUES (5, 1, 12922, 12915, 788500000, 'a', NULL, 'auto', NULL, 'auto', '7', 'auto', 'a', 'auto', 0, 'auto', 'a', 'auto', 'dvb', 7, '20060220232313');
   INSERT INTO `dtv_multiplex` VALUES (6, 1, 2462, 12929, 809500000, 'a', NULL, 'auto', NULL, 'auto', '7', 'auto', 'a', 'auto', 0, 'auto', 'a', 'auto', 'dvb', 17, '20060218202301');

LIRC

Grab lircd patch from http://www.itee.uq.edu.au/~chrisp/Linux-DVB/DVICO/. download lircd 07, patch, make as per instructions on the site. Copy the resulting lircd binary over /usr/sbin/lircd (beware: apt-get upgrades that include lircd may break your remote config. Might be worth saving off a copy of the binary somewhere else).

The latest FC4 kernel contains updated drivers to make these cards work (2.16.1+). You will not need to download any patches, you may need to compile lirc 0.8.0 or later though.

Fedora users: modify /etc/sysconfig/lircd to: 

   LIRCD_OPTIONS="--driver=dvico --device=/dev/hiddev0"

Ubuntu users: modify /etc/lirc/hardware.conf to include: 

   DEVICE="/dev/usb/hiddev0"
   DRIVER="dvico"

(NOTE: There could potentially be other hiddev devices on your system.. in this case, your tuner may be hiddev1 or 2 - not sure how to best determine this).

Beware if you have the Dual Tuner card. You will probably need to use the "dev/input" drivers. The "dvico" driver is for "hiddev" support, not for "dev/input" input support.

Fedora users: modify /etc/sysconfig/lircd to: 

   LIRCD_OPTIONS="--driver=dev/input --device=/dev/input/event2 -p 666 /etc/lircd.conf"

(NOTE: You could need event3 or higher. Look for event entries in output of "dmesg" after you first boot) 

 DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual USB).
 dvb-usb: recv bulk message failed: -110
 DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
 input: IR-receiver inside an USB DVB receiver as /class/input/input2
 dvb-usb: schedule remote query interval to 150 msecs.
 dvb-usb: DViCO FusionHDTV DVB-T Dual USB successfully initialized and connected.

~mythtv/.mythtv/lirc: Set as follows:

Note: DVICO cards that ship with a "Windows Media Center" orient controller, have slightly different bindings - the set-up below appears to accomodate both, to a degree. Feel free to tweak to your own personal habits.

Note: This config roughly mirrors the Hauppauge grey remote configuration, with a few extras added to cope with the specific buttons on the DVICO remote. 


   # Ultraview / dvico DVB-T Black remote
   
   # Channel Up
   begin
   prog = mythtv
   button = ch_up
   repeat = 3
   config = Up
   end
   
   # Channel Down
   begin
   prog = mythtv
   button = ch_down
   repeat = 3
   config = Down
   end
   
   # OK/Select
   begin
   prog = mythtv
   button = ok
   config = Space
   end
   
   # Play/Pause
   begin
   prog = mythtv
   button = playpause
   config = P
   end
   
   begin
   prog = mythtv
   button = stop
   config = Esc
   end
   
   # Escape/Exit/Back
   begin
   prog = mythtv
   button = back
   config = Esc
   end
   
   # Escape/Exit/Back
   begin
   prog = mythtv
   button = tv_onoff
   config = Esc
   end
   
   # big green start button
   begin
   prog = mythtv
   button = start
   repeat = 3
   config = Esc
   end
   
   # Mute
   begin
   prog = mythtv
   button = mute
   repeat = 3
   config = F9
   end
   
   # Fast forward (30 sec default)
   begin
   prog = mythtv
   button = fastforward
   repeat = 24
   config = Right
   end
   
   # Back (10 sec default)
   begin
   prog = mythtv
   button = rewind
   repeat = 24
   config = Left
   end
   
   # Skip forward (10 min default)
   begin
   prog = mythtv
   button = skip
   repeat = 3
   config = PgDown
   end
   
   # Skip backward (10 min default)
   begin
   prog = mythtv
   button = replay
   repeat = 3
   config = PgUp
   end
   
   # Record
   begin
   prog = mythtv
   button = record
   repeat = 3
   config = R
   end
   
   # OSD browse
   begin
   prog = mythtv
   button = guide
   repeat = 3
   config = O
   end
   
   # Display EPG while in live TV,
   # View selected show while in EPG
   begin
   prog = mythtv
   button = setup
   repeat = 3
   config = M
   end
   
   # Scroll up
   begin
   prog = mythtv
   button = up
   repeat = 3
   config = Up
   end
   
   # Scroll down
   begin
   prog = mythtv
   button = down
   repeat = 3
   config = Down
   end
   
   # Scroll Left
   begin
   prog = mythtv
   button = left
   repeat = 3
   config = Left
   end
   
   # Scroll Right
   begin
   prog = mythtv
   button = right
   repeat = 3
   config = Right
   end
   
   # Bring up OSD info
   begin
   prog = mythtv
   button = more
   repeat = 3
   config = I
   end
   
   # Change display aspect ratio
   begin
   prog = mythtv
   button = aspect
   repeat = 3
   config = W
   end
   
   # Seek to previous commercial cut point
   begin
   prog = mythtv
   button = snapshot
   repeat = 3
   config = Q
   end
   
   # Seek to next commercial cut point
   begin
   prog = mythtv
   button = folder_open
   repeat = 3
   config = Z
   end
   
   # Numbers 0-9
   
   begin
   prog = mythtv
   button = 0
   repeat = 3
   config = 0
   end
   
   begin
   prog = mythtv
   button = 1
   repeat = 3
   config = 1
   end
   
   begin
   prog = mythtv
   button = 2
   repeat = 3
   config = 2
   end
   
   begin
   prog = mythtv
   button = 3
   repeat = 3
   config = 3
   end
   
   begin
   prog = mythtv
   button = 4
   repeat = 3
   config = 4
   end
   
   begin
   prog = mythtv
   button = 5
   repeat = 3
   config = 5
   end
   
   begin
   prog = mythtv
   button = 6
   repeat = 3
   config = 6
   end
   
   begin
   prog = mythtv
   button = 7
   repeat = 3
   config = 7
   end
   
   begin
   prog = mythtv
   button = 8
   repeat = 3
   config = 8
   end
   
   begin
   prog = mythtv
   button = 9
   repeat = 3
   config = 9
   end
   
   begin
   prog = mythtv
   button = dvd_menu
   config = M
   end
   
   begin
   prog = mythtv
   button = vol_down
   repeat = 3
   config = [
   end
   
   begin
   prog = mythtv
   button = vol_up
   repeat = 3
   config = ]
   end
   
   begin
   prog = mythtv
   button = dtv
   config = C
   end


~mythtv/lirc: Set as follows: 

   ### MPlayer/Xine lirc setup
   
   # Show OSD
   begin
   prog = mplayer
   button = guide
   repeat = 3
   config = osd
   end
   
   # Pause playback
   begin
   prog = mplayer
   button = stop
   repeat = 3
   config = pause
   end
   
   # Skip ahead a minute if playing
   # If paused, resume playing
   begin
   prog = mplayer
   button = playpause
   repeat = 3
   config = seek +1
   end
   
   # Stop playback and exit
   begin
   prog = mplayer
   button = tv_onoff
   repeat = 3
   config = quit
   end
   begin
   prog = mplayer
   button = back
   repeat = 3
   config = quit
   end
   
   # big green start button
   begin
   prog = mplayer
   button = start
   repeat = 3
   config = quit
   end
   
   # Mute
   begin
   prog = mplayer
   button = mute
   repeat = 3
   config = mute
   end
   
   # Seek back 10 seconds
   begin
   prog = mplayer
   button = left
   repeat = 3
   config = seek -10
   end
   
   # Seek forward 30 seconds
   begin
   prog = mplayer
   button = right
   repeat = 3
   config = seek +30
   end
   
   # Seek forward 3 minutes
   begin
   prog = mplayer
   button = fastforward
   repeat = 3
   config = seek +180
   end
   
   # Seek backward 3 minutes
   begin
   prog = mplayer
   button = rewind
   repeat = 3
   config = seek -180
   end
   
   # Seek forward 10 minutes
   begin
   prog = mplayer
   button = skip
   repeat = 3
   config = seek +600
   end
   
   # Seek backward 10 minutes
   begin
   prog = mplayer
   button = replay
   repeat = 3
   config = seek -600
   end
   
   # Toggle full-screen
   begin
   prog = mplayer
   button = fullscreen
   repeat = 3
   config = vo_fullscreen
   end
   
   # Xine
   
   begin
   prog = xine
   button = playpause
   repeat = 3
   config = Play
   end
   
   begin
   prog = xine
   button = stop
   repeat = 3
   config = Pause
   end
   
   begin
   prog = xine
   button = back
   config = Quit
   end
   
   begin
   prog = xine
   button = tv_onoff
   config = Quit
   end
   
   begin
   prog = xine
   button = right
   repeat = 3
   config = SeekRelative+10
   end
   
   begin
   prog = xine
   button = left
   repeat = 3
   config = SeekRelative-10
   end
   
   begin
   prog = xine
   button = fastforward
   repeat = 3
   config = SeekRelative+30
   end
   
   begin
   prog = xine
   button = rewind
   repeat = 3
   config = SeekRelative-30
   end
   
   begin
   prog = xine
   button = skip
   repeat = 3
   config = SeekRelative+300
   end
   
   begin
   prog = xine
   button = replay
   repeat = 3
   config = SeekRelative-300
   end
   
   begin
   prog = xine
   button = up
   repeat = 1
   config = EventUp
   end
   
   begin
   prog = xine
   button = down
   repeat = 1
   config = EventDown
   end
   
   begin
   prog = xine
   button = ok
   repeat = 0
   config = EventSelect
   end
   
   begin
   prog = xine
   button = guide
   repeat = 0
   config = Menu
   end
   
   begin
   prog = xine
   button = setup
   repeat = 0
   config = Menu
   end
   
   begin
   prog = xine
   button = vol_up
   repeat = 1
   config = Volume+
   end
   
   begin
   prog = xine
   button = vol_down
   repeat = 1
   config = Volume-
   end


/etc/lircd.conf: Set as follows: 

   # Please make this file available to others
   # by sending it to <lirc@bartelmus.de>
   #
   # this config file was automatically generated
   # using lirc-0.8.1pre1(dev/input) on Tue Jun 20 19:52:04 2006
   #
   # contributed by  Craig Cook
   #
   # brand:                      DViCO FusionHDTV DVB-T Dual Digital
   # model no. of remote control: MCE
   # devices being controlled by this remote:
   #
   
   begin remote
   
     name  DViCO_Dual_Digital
     bits           16
     eps            30
     aeps          100
   
     one             0     0
     zero            0     0
     pre_data_bits   16
     pre_data       0x1
     gap            251756
     toggle_bit      0
   
   
         begin codes
             1                        0x0002
             2                        0x0003
             3                        0x0004
             4                        0x0005
             5                        0x0006
             6                        0x0007
             7                        0x0008
             8                        0x0009
             9                        0x000A
             0                        0x000B
             rew                      0x00A8
             playpause                0x00A4
             ff                       0x00D0
             mute                     0x0071
             stop                     0x0080
             rec                      0x00A7
             power                    0x0074
             camera                   0x00D4
             live                     0x0182
             folder                   0x0086
             voldown                  0x0072
             volup                    0x0073
             chup                     0x0192
             chdn                     0x0193
             start                    0x001C
             replay                   0x00A5
             skip                     0x00A3
             down                     0x006C
             right                    0x006A
             left                     0x0069
             up                       0x0067
             ok                       0x0160
             dvdmenu                  0x008B
             back                     0x009E
             setup                    0x008D
             tvpower                  0x0164
             guide                    0x016D
             info                     0x0166
             alttab                   0x000F
             dtv                      0x0179
             mp3                      0x0187
             dvd                      0x0185
             cpf                      0x016C
             aspect                   0x0173
             zoom                     0x0174
         end codes
   
   end remote

~mythtv/.lircrc: Set as follows (for the Dvico Dual Tuner): 

   # lircrc.example.DVICO-nativelirc
   # 2004-07-04, Chris Pascoe
   # mailto:linuxdvb@itee.uq.edu.au
   # Save this file in ~/.mythtv/lircrc
   
   begin
       prog = mythtv
       button = power
       config = Esc
   end
   
   begin
       prog = mythtv
       button = Go
   # Swap the PiP windows
       config = N
   end
   
   begin
       prog = mythtv
       button = 1
       config = 1
       config = return
   end
   
   begin
       prog = mythtv
       button = 2
       config = 2
       config = return
   end
   
   begin
       prog = mythtv
       button = 3
       config = 3
       config = return
   end
   
   begin
       prog = mythtv
       button = 4
       config = 4
       config = return
   end
   
   begin
       prog = mythtv
       button = 5
       config = 5
       config = return
   end
   
   begin
       prog = mythtv
       button = 6
       config = 6
       config = return
   end
   
   begin
       prog = mythtv
       button = 7
       config = 7
       config = return
   end
   
   begin
       prog = mythtv
       button = 8
       config = 8
       config = return
   end
   
   begin
       prog = mythtv
       button = 9
       config = 9
       config = return
   end
   
   begin
       prog = mythtv
       button = back
       config = Esc
   end
   
   begin
       prog = mythtv
       button = 0
       config = 0
       config = return
   end
   
   begin
       prog = mythtv
       button = info
       config = I
   end
   
   begin
       prog = mythtv
       button = guide
       config = S
   end
   
   begin
      prog = mythtv
   # This is the Red key
   # We'll use it for "Delete"
      button = red
      config = D
   end
   
   # Note the "repeat =" strings in the volume and channel.
   # This means that if you hold down the key, every nth instance will be
   # passed.  This depends on your system, so you may want to increase or
   # decrease this and see what happens.  repeat = 1 is probably too
   # fast.
   
   begin
     prog = mythtv
     button = voldown
     repeat = 2
     config = F10
   end
   
   begin
     prog = mythtv
     button = volup
     repeat = 2
     config = F11
   end
   
   begin
       prog = mythtv
       button = chup
       config = Up
   end
   
   begin
       prog = mythtv
       button = chdown
       config = Down
   end
   
   begin
       prog = mythtv
       button = up
   # This is the "up" on the central diamond
       config = Up
   end
   
   begin
       prog = mythtv
       button = down
   # This is the "down" on the central diamond
       config = Down
   end
   
   begin
       prog = mythtv
       button = left
   # This is the "left" on the central diamond
       config = Left
   end
   
   begin
       prog = mythtv
       button = right
   # This is the "right" on the central diamond
       config = Right
   end
   
   begin
       prog = mythtv
   # Middle button on the diamond
       button = ok
       config = Return
   end
   
   begin
       prog = mythtv
       button = start
       config = Return
   end
   
   begin
       prog = mythtv
       button = mute
       config = |
   end
   
   begin
       prog = mythtv
       button = playpause
       config = ctrl+p
   end
   
   begin
      prog = mythtv
   # Change focus for PiP (to change channel in the other window)
      button = atvdtv
      config = B
   end    
   
   begin
      prog = mythtv
   # Toggle PiP on/off
      button = zoom
      config = V
   end
   
   begin
       prog = mythtv
       button = rew
       config = Left
   #    config = seek -180
   end
   
   begin
       prog = mythtv
       button = stop
       config = P
   end
   
   begin
       prog = mythtv
       button = ff
       config = Right
   #    config = seek +180
   end
   
   begin
       prog = mythtv
       button = record
       config = R
   end
   
   #begin
   #   prog = mythtv
   ## Teletext
   #   button = stop
   #   config = T
   #end
   
   begin
       prog = mythtv
       button = camera
       config = P
   end
   
   begin
      prog = mythtv
      button = replay
   # Use for backwards commercial skip
      config = Q
   end
   
   begin
      prog = mythtv
      button = skip
   # Use for forward commercial skip
      config = Z
   end
   
   begin
      prog = mythtv
      button = dvd
      config = Ctrl+D
   end
   
   begin
      prog = mythtv
      button = mp3
      config = Ctrl+M
   end
   
   begin
      prog = mythtv
      button = aspect
      config = W
   end    
   
   begin
      prog = mythtv
      button = dvhs
      config = c
   end
   
   # Xine
   
   begin
      prog = xine
      button = playpause
      repeat = 3
      config = Play
   end
   
   begin
      prog = xine
      button = stop
      repeat = 3
      config = Pause
   end
   
   begin
      prog = xine
      button = back
      config = Quit
   end
   
   begin
      prog = xine
      button = tv_onoff
      config = Quit
   end
   
   begin
      prog = xine
      button = right
      repeat = 3
      config = SeekRelative+10
   end
   
   begin
      prog = xine
      button = left
      repeat = 3
      config = SeekRelative-10
   end
   
   begin
      prog = xine
      button = ff
      repeat = 3
      config = SeekRelative+30
   end
   
   begin
      prog = xine
      button = rew
      repeat = 3
      config = SeekRelative-30
   end
   
   begin
      prog = xine
      button = skip
      repeat = 3
      config = SeekRelative+300
   end
   
   begin
      prog = xine
      button = replay
      repeat = 3
      config = SeekRelative-300
   end
   
   begin
      prog = xine
      button = up
      repeat = 1
      config = EventUp
   end
   
   begin
      prog = xine
      button = down
      repeat = 1
      config = EventDown
   end
   
   begin
      prog = xine
      button = ok
      repeat = 0
      config = EventSelect
   end
   
   begin
      prog = xine
      button = guide
      repeat = 0
      config = Menu
   end
   
   begin
      prog = xine
      button = setup
      repeat = 0
      config = Menu
   end
   
   begin
      prog = xine
      button = volup
      repeat = 1
      config = Volume+
   end
   
   begin
      prog = xine
      button = voldown
      repeat = 1
      config = Volume-
   end


reboot.

Retrieved from "http://www.mythtv.org/wiki?title=DVICO-Ultraview_Install_in_Australia&oldid=16182"