Deinterlacing

From MythTV Official Wiki
Revision as of 22:20, 27 November 2008 by T0ny (talk | contribs)

Jump to: navigation, search

Time.png Outdated: The information on this page may no longer be relevant to the current release of MythTV, 31.0. Please consider helping to update it. This page was last modified on 2008-11-27.

MythTV Deinterlacing

Deinterlacing is the process of converting traditional Interlaced Video into a Progressive Picture that can be displayed on modern non interlaced display devices such as LCD or Plasma screens.

There is a lot of general information on deinterlacing at Wikipedia in these two articles:

MythTV has several options for Deinterlacing. The configuration options for deinterlacing can be found under Mythfrontend->Utilities Setup->Setup->TV Settings->Playback. On Playback Profiles (3/9) edit each entry, The Primary and Fallback deinterlacer may be set on the 2nd sub-page.

GeneralPlayback.jpg

  • Linear Blend
  • Kernel (Less Motion Blur)
This requires SSE support compiled into your Kernel
  • Bob 2X Framerate
This requires Xv or XvMC video acceleration
This is also called Line Doubling and more information can be seen here (under line doubling):http://en.wikipedia.org/wiki/Deinterlacing#Deinterlacing_methods
  • One Field
  • yadif, something apparently Michael Niedermayer wrote for mplayer/ffmpeg that's fast but more CPU intensive than above
  • Greedyh


Important.png Note: If using a Nvidia TV output (composite/svideo) & watching PAL/NTSC signals there should be no need to deinterlace video because the TV output's flicker filter's default setting (of 127) makes interlaced material look perfectly natural - exhibited on FX5200 svideo output - YMMV.