Difference between revisions of "Dvbscan"

From MythTV Official Wiki
Jump to: navigation, search
m (Dvb Apps 2fdvbscan moved to Dvbscan: Proper title)
m (Categorized)
Line 1: Line 1:
= dvbscan =
+
{{Wrongtitle|dvbscan}}
  
 
dvbscan is a basic command-line utility to produce a set of channel configuration. It emits this information to stdout.
 
dvbscan is a basic command-line utility to produce a set of channel configuration. It emits this information to stdout.
Line 16: Line 16:
  
 
There are a slew of options for those with extra DVB devices, those wanting to use VDR and for filtering radio stations and encrypted channels.
 
There are a slew of options for those with extra DVB devices, those wanting to use VDR and for filtering radio stations and encrypted channels.
 +
 +
[[Category:Glossary]]

Revision as of 05:32, 24 April 2006

Important.png Note: The correct title of this article is dvbscan. It appears incorrectly here due to technical restrictions.


dvbscan is a basic command-line utility to produce a set of channel configuration. It emits this information to stdout.

Usage

dvbscan does not do a full-spectrum frequency scan. In order to get information on the multiplexes available, it reads this information from an existing transport. So you have to feed it this information ; happily, the source distribution comes with a handy selection of transport settings for most of the available transmitters.

The simplest use is (for example, running from the source folder)

dvbscan dvb-t/uk-[[Winter Hill]] > channels.conf

[[../tzap]] and it's siblings require a channels.conf file placed in their user config folder to operate.

There are a slew of options for those with extra DVB devices, those wanting to use VDR and for filtering radio stations and encrypted channels.