Difference between revisions of "Frequently Asked Questions"

From MythTV Official Wiki
Jump to: navigation, search
m
(Added rescheduling higher priority items)
Line 45: Line 45:
  
 
This will cause the backend to run normally, but not execute scheduled recordings.  When your problem has been cleared up, remove or comment out that switch. (Note that this is not a perfect solution; this switch wasn't actually designed for this, and will break LiveTV at the moment, among other side-effects.  The person who wrote this code notes on the mailing list that he expects he might clean it up some after 0.19 comes out.  So exercise caution.)
 
This will cause the backend to run normally, but not execute scheduled recordings.  When your problem has been cleared up, remove or comment out that switch. (Note that this is not a perfect solution; this switch wasn't actually designed for this, and will break LiveTV at the moment, among other side-effects.  The person who wrote this code notes on the mailing list that he expects he might clean it up some after 0.19 comes out.  So exercise caution.)
 +
 +
=== Q: Myth won't record a later showing of a program ===
 +
 +
The scheduler, by default, will not bump programs of higher priority even if there is a later showing as it assumes that you want to see higher priority shows sooner rather than later.  If you feel it is acceptable to bump them, there is a setting in the frontend setup to allow rescheduling of higher priority items that can be checked.  Just be aware, that exciting episode of [[:Wikipedia:24 (TV series)|24]] might be recorded a week or two later leaving you in the dark and plugging your ears as your friends talk about it.
  
 
=== Q: Do I need to have X-windows installed on my backend?  I don't want it. ===
 
=== Q: Do I need to have X-windows installed on my backend?  I don't want it. ===

Revision as of 14:28, 6 March 2006

Mergefrom.gif
It has been suggested that Mythtv Users F A Q be merged into this article or section. (Discuss)

(Note that there are many collections of Questions and Answers. Two are linked from the sidebar: Robert Kulagowski's Official FAQ/Install Guide, and Gavin Hurlbert's IRC FAQ site. You might want to check those before adding a question -- or answer -- here.)

Q: What is MythTV?

See User Manual:Introduction

Q: I can't get insert component here working. Help!

A tried and true rule: Get it working outside of MythTV before you try to get it working inside.

MythTV isn't an operating system. It requires working components to work. You would never try installing a PVR application on Windows before you got your video card, capture card, and audio system working perfectly. Don't try to do it on Linux.

Confirm that all of your hardware is working with an application outside of MythTV before attempting to run MythTV. It will save you innumerable hours of barking up the wrong tree and generally make your MythTV experience better.

Q: I upgraded X, Y, and Z and now everything is broken. Help!

The one piece of advice I can most often give Myth users is to keep it simple. Distribution packages, automatic installers, and many other Linux packaging features have made it very easy to get a MythTV system installed by even the most novice MythTV user. This does not mean that you should arbitrarily run apt-get/yum upgrade on a whim and install every package update that is available to you.

MythTV is designed as a PVR appliance, first and foremost. Once it is working, it should be hands off, even for what seems the most innocent of upgrades. As tinkerers, most of us can't resist installing the lastest this, or the newest that. But more often than not, a mass upgrade of every component on your system leads to trouble.

If it ain't broke, don't fix it

It may sound simple and foolish, but many people will tell you that once you have your MythTV system working, don't upgrade anything other than the MythTV application unless you absolutely have to. If you want to tinker with the latest of everything, build a slave backend and mess with it there.

Q: I upgraded my ivtv drivers to the latest version and now I can't record anything.

In newer versions of the ivtv drivers, namely 0.4.1 and above, the tuner name has changed from Tuner 0 to Tuner. This means that your existing card configuration in MythTV is no longer valid. The easiest way to fix this is to delete all your card data in mythtv-setup and set your cards up again and make sure to redo the Input Connections screen.

Q: Why aren't my new recordings showing up in Watch Recordings?

You probably have a filter set on Watch Recordings from a previous session. Hit MENU in the Watch Recordings screen and check to make sure that the View Filter and Group View are both set to All Programs.

Q: How do I import recordings from other sources into Myth?

In the contrib folder of the MythTV sources, there is a script named myth.rebuilddatabase.pl which takes an "--ext" command-line option followed by a file extension. This will prompt the script to search for those files that match the extension and prompt you for information about them to import them into the database along-side your existing recordings. or use MythVideo to import videos.

Q: Can I temporarily keep MythTV from attempting to record my scheduled programs?

If you're going to, for example, have your cable TV feed temporarily disconnected, and you don't want to record static, but you don't want to lose your schedules, modify whatever starts your machine's backend to add the --nosched flag, like this:

mythbackend --nosched

This will cause the backend to run normally, but not execute scheduled recordings. When your problem has been cleared up, remove or comment out that switch. (Note that this is not a perfect solution; this switch wasn't actually designed for this, and will break LiveTV at the moment, among other side-effects. The person who wrote this code notes on the mailing list that he expects he might clean it up some after 0.19 comes out. So exercise caution.)

Q: Myth won't record a later showing of a program

The scheduler, by default, will not bump programs of higher priority even if there is a later showing as it assumes that you want to see higher priority shows sooner rather than later. If you feel it is acceptable to bump them, there is a setting in the frontend setup to allow rescheduling of higher priority items that can be checked. Just be aware, that exciting episode of 24 might be recorded a week or two later leaving you in the dark and plugging your ears as your friends talk about it.

Q: Do I need to have X-windows installed on my backend? I don't want it.

MythTV requires Qt
Qt requires X-windows

You are not required to boot into graphical mode (see the documentation for your Operating Systems for details on how to boot to a console login). The mythtv-setup program run on the backend system is a graphical interface. You can either run this locally on the backend or use X11 forwarding to display the output of the program on another system.

And if you're concerned about the space that X-windows takes up, consider for a moment that your entire system is built to process multi-gigabyte files, a few megabytes for X-windows is a drop in the bucket.

Q: Are there any Debian (Sid) packages for MythTV?

Yes! Add this to your /etc/apt/sources.conf [1] (chapter 2 has config howto)

deb ftp://ftp.nerim.net/debian-marillat/ sid main

Then run (as root) apt-get update and then apt-get install mythtv

Q: Where do I get my TV guide data outside the US?

Please refer to the XmlTv page for information on non-US guide data

Q: Can I use MythTV without using my cable / satellite companies provided cable box?

United States:

  • Normal Analog Cable: Yes, you can usually use MythTV without their provided cable box
  • Digital Cable: In rare cases you can get analog cable off the same line, but typically no, you will need to continue to use the cable box
  • Satellite: No, you will need the satellite box

Q: Since I need to keep using my Cable/Sat box, how can I control it with MythTV?

A few different ways, and it depends on your specific hardware and the provider. Possibilities include Serial Control, USB Control, Firewire Control, and IR Blaster (using the PC as a programmable IR Remote Control). See the HOWTO for details

Q: Is MythTV development dead? Where is the next stable release?

No, the mythtv developers have been working hard.

There is no set release date for MythTV stable builds. They are released when they are considered ready to be released.

v0.19 was released at 0116 UTC, Sunday 12 Feb 2006.

Q: How do I view/record video through Composite/Svideo?

  • First verify if works outside MythTV eg test with TVTIME, These devices may be supported by Video4Linux (V4L).
  • Configure using mythtvsetup