Difference between revisions of "HD MythTV On A Budget"

From MythTV Official Wiki
Jump to: navigation, search
(added libdvdread script)
(added 10.04 LTS notes)
Line 3: Line 3:
  
 
As part of keeping more of our paycheck (Thanks Dave Ramsey), we decided that we needed to get rid of DishTV.  Out of the entire package, we felt that losing DVR functionality was unacceptable, so thus started our MythTV journey.  Again, in the interest of budget, we found that building our own frontends with new hardware (intel atom boxes) would cost about 200-250.  Therefore, I priced out some criagslist prices and found that I could save about 100-200 over the entire project by buying used computers. Since almost all of the MythTV documentation online talked about older hardware, it seemed like a great path.
 
As part of keeping more of our paycheck (Thanks Dave Ramsey), we decided that we needed to get rid of DishTV.  Out of the entire package, we felt that losing DVR functionality was unacceptable, so thus started our MythTV journey.  Again, in the interest of budget, we found that building our own frontends with new hardware (intel atom boxes) would cost about 200-250.  Therefore, I priced out some criagslist prices and found that I could save about 100-200 over the entire project by buying used computers. Since almost all of the MythTV documentation online talked about older hardware, it seemed like a great path.
 +
 +
** Please See Inline Notes For Changes After Mythbuntu 10.04 LTS Intall **
  
  
Line 76: Line 78:
 
     http://www.steventoth.net/blog/products/hvr-2250/  
 
     http://www.steventoth.net/blog/products/hvr-2250/  
 
   '''NOTE:'''  Whenever you update the kernel image, you WILL have to re-compile this
 
   '''NOTE:'''  Whenever you update the kernel image, you WILL have to re-compile this
 +
  '''10.04 LTS NOTE:  Supported in the Kernel.  You will still need the firmware files included in the link above.  Hauppage
 +
    does have more recent drivers, but will not work due to hardcoded driver size in the kernel.  Good news, no more recompiling!
  
  
Line 108: Line 112:
 
   '''WebSite:'''  http://ubuntuforums.org/showthread.php?p=2919008#post2919008
 
   '''WebSite:'''  http://ubuntuforums.org/showthread.php?p=2919008#post2919008
 
   '''Solution #2:''' While working on Frontend2, I found Ubuntu Minimal Install ISO.  This requires a little bit of additional  
 
   '''Solution #2:''' While working on Frontend2, I found Ubuntu Minimal Install ISO.  This requires a little bit of additional  
                 technical knowledge, but allows the option to install grub2 and mythbuntu from the install menus.  More details later.
+
                 technical knowledge, but allows the option to install grub2 and mythbuntu from the install menus.  More details later.      
 +
  '''10.04 LTS Solution: 10.04 installs grub2 by default, so the minimal install ISO is probably not needed any more 
  
  
Line 123: Line 128:
 
               learn all the streamzap codes.  That way, the streamzap receiver just thought the Dish remote was the streamzap and  
 
               learn all the streamzap codes.  That way, the streamzap receiver just thought the Dish remote was the streamzap and  
 
             from there, just got all the codes straightened out and mapped the way I want them.  Will include the file later.
 
             from there, just got all the codes straightened out and mapped the way I want them.  Will include the file later.
  '''Maybe solution:'''  Not sure if I had to do this, but I did install the latest version of lirc.  This will also have to be
 
                    recompiled after every linux image update.
 
  
  
Line 203: Line 206:
 
     - Install latest video drivers.  You will have to download from the nvidia website and compile these yourselves.   
 
     - Install latest video drivers.  You will have to download from the nvidia website and compile these yourselves.   
 
       Didn't have a huge impact, but everything helps.
 
       Didn't have a huge impact, but everything helps.
 +
    - 10.04 LTS NOTE:  The "Hardware Driver" version in ubuntu works fine, so no need to download and compile yourself until ubuntu gets
 +
      outdated.
 
     - As stated before, use the ubuntu minimal ISO.  the advantage is that it automatically grabs the current latest and greatest
 
     - As stated before, use the ubuntu minimal ISO.  the advantage is that it automatically grabs the current latest and greatest
 
       versions of everything, so you don't have go through the update manager and it will over-write pretty much your entire install.
 
       versions of everything, so you don't have go through the update manager and it will over-write pretty much your entire install.
 +
    - 10.04 LTS NOTE:  I do not think they have the minimal install ISO anymore.  So just install and see if thats good enough for you.
 
     - I set up all the transcodes and commflag processes to be run during the night.  By default they run right after the program is over.
 
     - I set up all the transcodes and commflag processes to be run during the night.  By default they run right after the program is over.
 
       Since these processes can take up a lot of CPU, that was not good.
 
       Since these processes can take up a lot of CPU, that was not good.

Revision as of 21:16, 3 May 2010

My Goal with this Wiki is to document the trials and tribulations of saving a few dollars on building a High Definition Capable MythTV system on a budget. This meant buying whatever I could at decent prices off of craigslist.


As part of keeping more of our paycheck (Thanks Dave Ramsey), we decided that we needed to get rid of DishTV. Out of the entire package, we felt that losing DVR functionality was unacceptable, so thus started our MythTV journey. Again, in the interest of budget, we found that building our own frontends with new hardware (intel atom boxes) would cost about 200-250. Therefore, I priced out some criagslist prices and found that I could save about 100-200 over the entire project by buying used computers. Since almost all of the MythTV documentation online talked about older hardware, it seemed like a great path.

    • Please See Inline Notes For Changes After Mythbuntu 10.04 LTS Intall **


Original Objectives:

  - Spend about 100 - 150 per frontend
  - All frontends should be able to handle HD TVs (current TVs are CRT, but you never know what Santa will bring)
  - Diskless would save some money, power and noise
  - Original Estimate was $661.  Dish + Landline cost about $500/year.


Backend: Total: $202

  - I had a home-built Athlon 3700 box collecting dust (yay for breaking WoW addiction)
  - Hauppauge WinTV-HVR-2250 tuner card - $112
  - 2G RAM
  - 160G HD
  - 1TB HD - $90


Frontend 1: Total: $135

  - Dell Optiplex 320 3.0GHz  - $80 from craigslist
  - ZOTAC ZT-94TEH2L-FDR-V1 GeForce 9400 GT 512MB  - $41 from newegg
  - 1G RAM - $14 from Frys
  - 80G HD


Frontend 2: Total: $113.99

  - HP 2.6GHz - $80 from craigslist
  - ZOTAC ZT-62AA250-HSS GeForce 6200 256MB (AGP)  - $33.99 from newegg
  - 1G RAM
  - 80G HD


Networking: Total: $218

  - Linksys Router - already owned
  - Linksys PLK300 PowerLine AV - $145 
  - Linksys PLE300 - $73 from amazon
  *Note*  I tried a wireless card, SD channels showed up great, but the HD channels were horrible.  This was a WirelessG card.  
          Not sure how N would work.  The powerline stuff is expensive, but it is working really well.


TV:

 - Terk Technology HDTVi antenna - $45 from Frys
 - ScheduleDirect for program listing - $20/year

Remotes:

- 2 Streamzap PC Remotes from Amazon - $60


Total Cost:

 $793.99 + some shipping not included above 


Approx Savings from buying used instead of new hardware: (assuming $200 per frontend)

 $151.01


So there goes the budget :( It will take about a year and a half to start making money off of the setup. Of course, buying used you run the risk of the hardware going bad on you sooner, so I may need to spend that 150 anyway later on when one of my machines die.




Now, for the part you probably came here for, Getting MythTV Working.


Backend:

After some research, I found that mythbuntu was one of the more popular options in terms of forum and documentation support. So I installed a BE/FE configuration on my backend for testing. After looking at the eye candy and the features, I got preliminary wife support to go ahead with the project. So I ordered the Hauppage 2250 Tuner card. This brought up problem #1.

 Issue: Hauappage TV Tuner Card does not work in Linux out of the box
 Solution:  God liked me and gave Steven Toth the great wisdom to make drivers for it.
   http://www.steventoth.net/blog/products/hvr-2250/ 
 NOTE:  Whenever you update the kernel image, you WILL have to re-compile this
 10.04 LTS NOTE:  Supported in the Kernel.  You will still need the firmware files included in the link above.  Hauppage 
    does have more recent drivers, but will not work due to hardcoded driver size in the kernel.  Good news, no more recompiling!


 Issue: The tuner card does not like it when you watch the same channel on both tuners.  The picture is really bad.
 Solution: Not sure if this is common with tuner cards or just this one.  No solution found yet.


After getting it to work, I got LiveTV! Everything was working great on my backend. Then I noticed something.

 Issue: HD recordings can take up to 6Gb/hour.  SD is about half of that.  
 Solution:  Auto-Transcode the kids shows.  Make sure to watch the adult shows quickly.  Decided not to auto-transcode the adult 
            shows because we tend to watch them the same night.  When the shows build up, we may auto-transcode more of them.  
            Of course, we also ordered a 1TB HD :)   After transcoding, the kids shows take about 1G/30 minutes and adult shows 
            about 3G/hour


Then I realized I had DHCP on, so I had to lock in the IP address for the backend. After doing some reading, it seemed that the DNS name thing was kind of undependable, so IP address it was.

   Issue:  DHCP kept changing IP address of backend
   Solution:  Installed dd-wrt and set up a static lease for my backend  


So great, backend done, now for Frontend #1.


Frontend 1:

After some craigslist lurking, bought a Dell Optiplex 320. Small, quiet, PCI-express slot, 3Ghz, perfect, right? Only after about 20ish hours of work! :(

  Issue: Dell Optiplex 320 Does not like booting linux.  Not sure on the details, but after some research found that it needs Grub2
  Solution:  You will need to install Grub2.  This is not so easy with mythbuntu and requires some command line interaction.
  WebSite:  http://ubuntuforums.org/showthread.php?p=2919008#post2919008
  Solution #2: While working on Frontend2, I found Ubuntu Minimal Install ISO.  This requires a little bit of additional 
               technical knowledge, but allows the option to install grub2 and mythbuntu from the install menus.  More details later.       
  10.04 LTS Solution: 10.04 installs grub2 by default, so the minimal install ISO is probably not needed any more  


  Issue: Dell Optiplex 320 Does not recognize USB ports until after the middle of loading the OS.  So diskless bootup went out the 
         window since the machine would boot off the USB, but then I had to unplug it and plug it back in when the mythbuntu bar 
         was about halfway across the screen. Painful.
  Solution:  Hard Drive install.  Tried network booting, but could not figure out how to manage the mythbuntu network boot features.
             I could create the linux image, but updating it and maintaining it seemed painful.  Also, could not get network booting 
             to work very well on the Dell.
  Issue: Wanted to use my existing DishTV remotes with the streamzap receiver. 
  Solution:  I will try to re-find and post the website that helped me with this.  The most important key that I learned is 
             that hopefully you have the Dish remote that can learn.  So I took the streamzap and the dish and had the Dish remote 
             learn all the streamzap codes.  That way, the streamzap receiver just thought the Dish remote was the streamzap and 
            from there, just got all the codes straightened out and mapped the way I want them.  Will include the file later.


  Issue:  Audio was too low
  Solution:  Go to Mixer and turn up all the volumes, then type:
              sudo alsactl store
              in a terminal to save all the settings
  NOTE:  Turn OFF automatic updates.  As mentioned above, if it installs updated linux kernels, you will have to recompile things, 
  which is a pain.  If you want the latest and greats of the important stuff, go to the mythbuntu website and set up the automatic 
   weekly builds. Just make sure to do the fixes branch.  


So Frontend 1 is working great with the video card installed. Able to watch LiveTV, view movies I put on the backend, record things, working great. I learned enough about NFS to connect the media directories on the backend machine to the frontend machine so now all the frontends can share one video library. YAY. Now its time to disconnect it from the router :)


Purchased a wirelessG card. SD channels work great, but most of the channels now transmit HD over the air. So only like 2 channels worked. All of the other ones would play for a minute, stop, play another minute, stop, etc. All the stuff online said it worked, but that was written a long time ago and probably didn't cover HD. Let me tell you right now, even in the same room 10 feet away, WirelessG will NOT work for HD channels.


More research and advice from my co-worker (thanks Erik), I came across Ethernet over Powerline. While scary sounding (don't be messing with my power) and expensive, I was too far into the project to quit now. Sure enough, it worked great! From all the power outlets that I cared about, the bandwidth was plenty.


So Frontend 1 was now live in a room across the house. After some testing and more diddling (that's the thing with MythTV, there's always room to tweak), it was time to continue with the project. I will try to cover some of the more important tweaks a little later.


Frontend 2:

The bad part about craigslist is that you either have uber patience to find the price/item you want, or grab what you can take. So I bought a HP 2.6GHz. Again, from reading online, 2.6GHz was marginal, but should work. Mythbuntu stated recommended for HD was 3GHz, but I waited a week or so and couldn't find another Dell Optiplex 320 for a decent price.


Anyway, install went smoothly, mythbuntu Frontend. Got it all hooked up to the backend database, started the Frontend up and...

  Issue:  2.6GHz really isn't enough for HD content.  OOPS  The CPU was maxed out.  Frontend was at like 50% CPU and xorg was the 
          other 50%
  Solution:  Get a decent AGP video card and hope that it can take some of the pressure off the CPU


So I got the AGP video card and crossed my fingers. No luck. Nothing was better. So more research. Found the playback settings and changed the playback profile to slim. Great improvement, but not there yet. Tried Xvmc. Better still, but still maxing out the CPU and causing visual issues.


So research all available optimizations of mythtv Frontends. Came across a site that suggested that you trash all the extras and install minimal Ubuntu. First, I tried not even installing gnome, only a basic window manager. Tried to get that working, but decided my technical knowledge was not enough for that (it decided for me, but that's besides the point). So exploring the menus found that it lets you install mythbuntu right from there. By this point, I was pretty tired of all this, so I went straight to installing the mythbuntu frontend option. Installed the latest drivers, kept everything else as minimal as possible.


By some miracle, the minimal mythbuntu Frontend install actually performs better than the mythbuntu install! xorg only takes up about 10% CPU now and mythFrontEnd takes from 70-80% So its barely working, but its working!


A major contributing factor may have been that I replaced the TV antenna also. We found that bad reception was very bad for the computer CPU usage :) So bought a better TV antenna and with the minimal install, its working great. Probably wasted a bunch of time with that, but I learned about the minimal install ISO and how it lets you install grub2 from there, so that's good.


The kids shows alone are taking about 40+G transcoded, so when the TV season starts, the adult shows are going to stretch our 80G limit. Therefore, we bought a 1TB hard drive. Could probably get away with less, but you would only save like $20.



Technical Stuff:


  Hard Drive Partitioning:   
    /       :ext3:  70G  (overkill - but all updates take up disk space)
    /var/lib:xfs: 10G  (mythbuntu likes putting stuff here, but its mainly just going to be the database once you set everything up)
    /liveTV :xfs: 80G  (we are using usually 1 TV and LiveTV takes approx 40G after a night of watching.  So 2 TVs might take up 80G)
    /media  :xfs: the rest (make sure to keep LiveTV and media in separate partitions. If they are on the same partition, you never 
              really know how much free space you have because LiveTV auto-expires.  So you could have 3G one day, then 30G the next)
    NOTE:  media = recordings, movies, music, etc.  If you have lots of movies or music, you may want another partition for those


  Optimizing:
  - Backend:
    - In mythbuntu control center, go to advanced, and turn on the mythweb tweak option
    - Same menu, pick the automatic database optimization
    - Same menu, turn on automatic xfs defrag
  - Frontends:
    - Go to Setup-TV-> Program Guide and turn off channel icon and genre text.  This is useless and seems to improve program 
      guide performance
    - Play around with the Playback profiles in Setup->TV->Playback.  I use Slim for my Dell and I made a new one called Xvmc for 
      the HP.  Will post details.
    - Install latest video drivers.  You will have to download from the nvidia website and compile these yourselves.  
      Didn't have a huge impact, but everything helps.
    - 10.04 LTS NOTE:  The "Hardware Driver" version in ubuntu works fine, so no need to download and compile yourself until ubuntu gets
      outdated.
    - As stated before, use the ubuntu minimal ISO.  the advantage is that it automatically grabs the current latest and greatest
      versions of everything, so you don't have go through the update manager and it will over-write pretty much your entire install.
    - 10.04 LTS NOTE:  I do not think they have the minimal install ISO anymore.  So just install and see if thats good enough for you.
    - I set up all the transcodes and commflag processes to be run during the night.  By default they run right after the program is over.
      Since these processes can take up a lot of CPU, that was not good.
    


   Movie Storing:
  - I tried using the MythTV movie archiving program, but I must be below the intelligence threshold for it, because I failed.  I found
    it easier to find a good mencoder command off the internet and use that on the command line.  Here is the process I follow:
    - Start up mythfrontend and go to DVD ripping area.  It is pretty good at finding the correct title track
    - enter the following command:
          mencoder dvd://1 -dvd-device /media/cdrom0 -ovc xvid -xvidencopts pass=1 -alang en -oac mp3lame -o dvd.avi
    - Where dvd://1 :  1 = title number of main movie gotten from mythFrontEnd step.
    Yes, thats complicated, one of these days I will figure out how to use the mythfrontend ripping system.


   NFS
   - Backend:
      - fstab: 
          /dev/sdb1   /liveTV  xfs    defaults,noatime,nodiratime,logbufs=8,allocsize=512m     0     0
          /dev/sdb2   /video  xfs    defaults,noatime,nodiratime,logbufs=8,allocsize=512m     0     0
      - export:
          /liveTV    *(rw,async,no_root_squash,no_subtree_check)
          /video    *(rw,async,no_root_squash,no_subtree_check)
   - Frontends:
      - fstab:
          192.168.1.101:/liveTV /liveTV nfs rsize=8192,wsize=8192,intr
          192.168.1.101:/video /video nfs rsize=8192,wsize=8192,intr 


  Xvmc
   All I had to do here is put this in the /etx/X11/xorg.conf file:
   Section "Device"
      Identifier     "Device0"
      Driver         "nvidia"
      VendorName     "NVIDIA Corporation"
      Option         "UseEvents"   "True"                 
  EndSection


  Xvmc Playback Profile
   Create a new Playback Profile and use the following settings:
     - All resolutions
     - Decoder: Standard Xvmc
     - OSD: chrom...
     - Primary Deinterlacer: Box (2x)
     - Fallback: One Field
   
  General Tweaking of settings
   - Frontend - Turned on auto commercial skipping - then auto-rewind for 7 seconds after skip
   - Frontend - Record 90 seconds before and after scheduled recording


  Transcoding Options
   - Autodetect from MPEG2  (this is minimum bitrate, but good enough for low quality TV sets)
      - Codec: Mpeg-4
      - Bitrate: 1500
      - Max quality: 2
      - Min Quality: 15
      - Max difference: 3
      - Audio Codec: MP3
      - Sampling Rate: 32000
      - MP3 Quality: 7
      - Volume: 92
   - High Quality
      - Same but Video Bitrate: 2200
   - Medium Quality
      - Same but Video Bitrate: 1800


  Ubuntu Minimal CD stuff
  - The good:
    - Can install grub 2 directly from the install process
    - Helps you install just the bare minimum of what you need (although by the time you are done, you have all the junk anyway)
  - The bad:
    - Inconsistent menus.  One time you can get one set of menus, another time not (see details below)
    - Need to know more about linux (easy to learn the required stuff on the internet though)
  - Process:
    - Download ISO from https://help.ubuntu.com/community/Installation/MinimalCD
    - Use a program to either burn the iso to a CD or a usb thumb drive (think I used a program called usb-creator)
    - Plug into computer, start it up.  At the boot> prompt, you can type in one of two things:
      - cli  :  This is the default menus.  Still requires above newbie knowledge, but its decent.
      - cli-expert : I am no expert, but I found that this provided the freedom of options that I wanted.
    - The first time I ran this, one of the menus allowed me to pick what flavor of ubuntu to install.  This list even included
      mythbuntu frontend.  However, the second time I tried this, it never gave me that menu.  No clue why, but I did not feel
      like spending the time to figure it out.  Just hope that you get that menu, I think it was in the "Select and Install
      Software" portion.  If you do not get that menu, here is what to do:  (based one website: 
      http://www.psychocats.net/ubuntu/minimal )
      - After the basic install is done, it will restart and you will just be given a text login prompt.  Log in and do:
        *ASSUMED*  That you have a mythbuntu backend already up on the network
        - sudo apt-get install ssh
        - scp BACKEND:/etc/apt/sources.list .    (where BACKEND is the IP or hostname of the backend computer)
        - sudo mv sources.list /etc/apt/sources.list
        - sudo apt-get update
        - sudo apt-get install xorg xterm gdm xubuntu-deskptop menu firefox gksu synaptic mythbuntu-control-centre
        *NOTE*  If it reports one of the packages is missing, it means that the sources.list step failed, try again.
        - At this point, I installed the latest nvidia drivers and the latest lirc
        - reboot computer
      - When it comes back up, you should be given a graphical login prompt and you can log into the xfce window manager
        - Start up the the mythbuntu-control centre and pick the correct options, here are some of mine: 
          - Frontend-only
          - De-select Xubuntu desktop (not sure if that does anything)
          - Selected the themes, DVD codecs, backend info, plugins I wanted, changed login behavior, etc
          - Run the script /usr/share/doc/libdvdread4/install-css.sh and then reboot computer


After All that is done, reboot to make sure mythFrontend comes up correctly and you are done!


  Remote Mapping:
    ~/.lirc/mythtv:
# LIRCRC Auto Generated by Mythbuntu Lirc Generator
# Author(s): Mario Limonciello, Nick Fox
# Created for use with Mythbuntu
# OK/Select
begin
prog = mythtv
button = OK
config = Space
end

# Play
begin
prog = mythtv
button = Play
config = Return
end

# Stop
begin
prog = mythtv
button = Stop
config = Esc
end

# Escape/Exit/Back
begin
prog = mythtv
button = Exit
config = Esc
end

# Power Off/Exit
#begin
#prog = mythtv
#button = Power
#config = Esc
#end


# CHUP becomes tuner change
begin
prog = mythtv
button = ChUp
config = Y
end

# ChDown becomes Time Stretch
begin
prog = mythtv
button = ChDown
config = A
end


# Pause
begin
prog = mythtv
button = Pause
repeat = 3
config = P
end

# Mute
begin
prog = mythtv
button = Mute
repeat = 2
config = F9
end

begin
prog = mythtv
button = SeekBack
repeat = 2
config = Left
end

# Rewind (10 sec default)
begin
prog = mythtv
button = SeekFw
repeat = 2
config = Right
end

# Skip forward (10 min default)
begin
prog = mythtv
button = TrackNext
repeat = 2
config = PgDown
end

# Skip backward (10 min default)
begin
prog = mythtv
button = TrackPrev
repeat = 2
config = PgUp
end

# Record
begin
prog = mythtv
button = Record
repeat = 2
config = R
end

# Volume Up
begin
prog = mythtv
button = VolUp
repeat = 2
config = ]
end

# Volume Down
begin
prog = mythtv
button = VolDown
repeat = 2
config = [
end


# Widescreen
begin
prog = mythtv
button = Red
repeat = 2
config = W
end

# Display EPG while in live TV,
# View selected show while in EPG
begin
prog = mythtv
button = Menu
repeat = 2
config = M
end

# Scroll Right
begin
prog = mythtv
button = Right
repeat = 2
config = Right
end

# Scroll Left
begin
prog = mythtv
button = Left
repeat = 2
config = Left
end

# Scroll Up
begin
prog = mythtv
button = Up
repeat = 2
config = Up
end

# Scroll down
begin
prog = mythtv
button = Down
repeat = 2
config = Down
end



# Info 
begin
prog = mythtv
button = Green
repeat = 2
config = I
end

# Seek to previous commercial cut point
begin
prog = mythtv
button = Yellow
repeat = 2
config = Q
end

# Seek to next commercial cut point
begin
prog = mythtv
button = Blue
repeat = 2
config = Z
end

# Numbers 0-9

begin
prog = mythtv
button = 0
repeat = 2
config = 0
end

begin
prog = mythtv
button = 1
repeat = 2
config = 1
end

begin
prog = mythtv
button = 2
repeat = 2
config = 2
end

begin
prog = mythtv
button = 3
repeat = 2
config = 3
end

begin
prog = mythtv
button = 4
repeat = 2
config = 4
end

begin
prog = mythtv
button = 5
repeat = 2
config = 5
end

begin
prog = mythtv
button = 6
repeat = 2
config = 6
end

begin
prog = mythtv
button = 7
repeat = 2
config = 7
end

begin
prog = mythtv
button = 8
repeat = 2
config = 8
end

begin
prog = mythtv
button = 9
repeat = 2
config = 9
end


### MPlayer lirc setup

# Show OSD
begin
prog = mplayer
button = Menu
repeat = 2
config = osd
end

# Pause playback
begin
prog = mplayer
button = Pause
repeat = 2
config = pause
end

# Skip ahead a minute if playing
# If paused, resume playing
begin
prog = mplayer
button = Play
repeat = 2
config = seek +1
end

# Stop playback and exit
begin
prog = mplayer
button = Stop
repeat = 2
config = quit
end

# Mute
begin
prog = mplayer
button = Mute
repeat = 2
config = mute
end

# Seek back 10 seconds
begin
prog = mplayer
button = SeekBack
repeat = 2
config = seek -10
end

# Seek forward 30 seconds
begin
prog = mplayer
button = SeekFw
repeat = 2
config = seek +30
end

# Quit
begin
prog = mplayer
button = Exit
repeat = 2
config = quit
end

# Seek forward 10 minutes
begin
prog = mplayer
button = TrackNext
repeat = 2
config = seek +600
end

# Seek backward 10 minutes
begin
prog = mplayer
button = TrackPrev
repeat = 2
config = seek -600
end

# Toggle full-screen
begin
prog = mplayer
button = Green
repeat = 2
config = vo_fullscreen
end
   - /usr/share/lirc/remotes/streamzap/lircd.conf.streamzap
#
# this config file was automatically generated
# using lirc-0.7.1-CVS(serial) on Fri Feb  4 23:20:56 2005
#
# contributed by Christoph Bartelmus
#
# brand:                       Streamzap
# model no. of remote control: PC Remote
# devices being controlled by this remote: USB receiver
#

begin remote

  name  Streamzap_PC_Remote
  bits            6
  flags RC5|CONST_LENGTH
  eps            30
  aeps          100

  one           889  889
  zero          889  889
  plead         889
  pre_data_bits   8
  pre_data       0xA3
  gap          108344
  toggle_bit      2


      begin codes
          0                        0x00
          1                        0x01
          2                        0x02
          3                        0x03
          4                        0x04
          5                        0x05
          6                        0x06
          7                        0x07
          8                        0x08
          9                        0x09
          Power                    0x0A
          Mute                     0x0B
          ChUp                    0x0C
          VolUp                   0x0D
          ChDown                  0x0E
          VolDown                 0x0F
          Up                       0x10
          Left                     0x11
          Ok                       0x12
          Right                    0x13
          Down                     0x14
          Menu                     0x15
          Exit                     0x16
          Play                     0x17
          Pause                    0x18
          Stop                     0x19
          TrackPrev                      0x1A
          TrackNext                      0x1B
          Record                   0x1C
          SeekBack                       0x1D
          SeekFw                       0x1E
          Red                     0x20
          Green                    0x21
          Yellow                   0x22
          Blue                     0x23
      end codes

end remote



Conclusion:


So I figure if you start with absolutely nothing and want a mythtv system for 2 TVs, you are probably looking at about a $1100 price tag. This includes a backend, two frontends, network infrastructure, antenna, cables, etc. Adding additional TVs will cost about $300 per TV (computer, network, cables).

How do you figure out if its the right decision for you? Here are a few factors:

  - Movie junkies and parents of kids will LOVE the fact they can just choose a movie and watch without worrying about looking 
    for and scratching the DVDs.
  - MythTV is a fully functioning DVR and media center.  It is not as "clean" as a Tivo or DishDVR, but its "good enough"
  - If you have satellite or cable, just pay the extra $5/month for the DVR.  Setting up mythTV just for a media center is not cost
    efficient, but if you have the money for it, its awesome.
  - If you are thinking about Tivo, strongly consider setting up a MythTV system instead.  Myth has twice the functionality of a Tivo
    and overall a cheaper price. (no monthly fee)
  - You will need to already have knowledge of, or be willing to learn about Linux to get this working at peak performance.  Mythbuntu 
    is a great start, but there is always something that will require command line intervention.  Safest bet is to pay your local 
    computer geek a few dollars to set it up for you.  Best case, you will just have to learn about NFS and maybe the audio mixer.
  - There are media centers available for windows (sageTV), but you will need nicer computers than what I bought here because 
    windows+HDTV is not going to be happy.  MythTV is the nicer on the wallet.


Overall, for my family, it was worth it. We are ditching our Dish Satellite and landline. In a year and a half, we will be saving about $60/month from going with mythTV. Yes its more work, but if you are or know a computer guy, this project can be a fun (sometimes maddening) one. If you are in doubt over your technical expertise, just compensate with better hardware. The majority of my issues came from buying previous generation equipment and expecting it to meet modern day demands.


Thank for reading, hope it helps!