As of late May 2008, the Hauppauge HD-PVR is shipping to customers. The HD-PVR is a USB device that captures the component video and analog/optical audio outputs of any consumer device (including cable/satellite set-top-boxes, HD Disk Players, video game consoles, and various other home media devices). The HD-PVR is a highly anticipated capture device because it exploits the so-called "analog hole" of component video outputs, permitting the user to capture High-Definition video from most sources and without concern for encryption. In other words, since component video is not and cannot be encrypted, previously un-capturable HD sources such as satellite and premium television will now be fully accessible in MythTV.
The HD PVR captures at resolutions from VGA/D1 up to 1080i, and encodes the component inputs in real time using the h.264/MPEG-4 video codec and the AAC audio codec. The streams are muxed into a slightly modified MPEG-2 Transport Stream container. Capture resolution is dependent on the source (ie 720p video with be captured as such, 1080i as 1080i, etc.) but the bitrate is user-selectable from 1 Megabit/second up to 13.5 Megabits/second. The h.264 video codec is, bit-for-bit, up to 40% more efficient than the MPEG-2 video codec commonly used in US HDTV broadcasts today. A 13.5 Mb/s h.264 stream is roughly equivalent to a full-channel-bitrate MPEG-2 recording at approximately 19 Mb/s.
The HD-PVR uses modern codecs capable of exceptional compression rates at excellent quality. The tradeoff is that decoding h.264 material is very processor-intensive. Systems which struggle or barely manage to play back US broadcast HD are likely to fail altogether when playing back recording from the HD-PVR. Hauppauge recommends a dual-core CPU as a minimum. A frequently cited minimum for medium-bitrate h.264 playback is a Core 2 Duo 1.8 Ghz processor. HD Playback Reports acts as a repository for processor requirements to play High Definition material. HD-PVR users are encouraged to contribute to the page to ascertain real-world playback requirements with MythTV.
Hauppauge has signalled their intention to update the HD-PVR firmware and software with the ability to mux the original AC3 audio of the source via the optical connector, enabling the device to record the original multichannel audio track. This capability will not be present at launch.
Some UK television providers (notably Virgin and Freesat) have attempted to counter the HD-PVR and similar devices by selectively disabling the component outputs of their set-top-boxes. US cable and satellite providers are following suit and lobbying legislators for the right to disable the component outputs of their devices.
NOTE: Citations for the above information would be helpful for readers seeking additional information about this issue. Thanks.
There is a theoretical solution to this, albeit somewhat expensive. A company called HDFury makes a HDCP-compliant HDMI to RGB bridge. The RGB output of the HDFury can be converted to component with a second device from Box1020. In essence, a user with an HDMI-only device could utilize the following path to convert HDMI to component video:
HDMI Source -> HDMI to DVI cable -> HD Fury -> Box1020 -> Component Cable -> HD-PVR
At the time of this writing, the HDFury and Box1020 cost approximately $350 US. Add to that the cabling and $250 US cost of the HD-PVR and the total cost approaches $650 US. Some users will be put off by the high cost and circuitousness of the solution, but for an increasing number of MythTV users, it may be the only one.
Another possibility is the Exten HD HDMI to Component Video Converter. It is currently available for approximately $260.00 US. However this device automatically shuts off the component outputs when the input is encrypted (Protected), so it is no different than the outputs of the set top box.
HD-PVR Driver Compilation Howto
Linux support for the HD-PVR is in progress and release is anticipated by the time the first devices are in the hands of consumers. Watch this space for module compilation instructions.
Configuring the HD-PVR in MythTV
MythTV support for the HD-PVR is also underway. A howto will appear in this space upon release of Myth support.