Difference between revisions of "IR - Extending an IR receiver"

From MythTV Official Wiki
Jump to: navigation, search
m (Applications for extending IR receiver)
m (fix links)
Line 3: Line 3:
 
Moving a MythTV (or any media center machine for that matter) to a location other than that of the display can often be the most affordable solution to a stubborn problem. Noise. Often times, space constraints or aestetics may prevent a machine from residing near the display. Some power-users often centralize their equipment to a machine room in the basement such as this  [http://ultimatemythtv.wordpress.com/ fellow] has.
 
Moving a MythTV (or any media center machine for that matter) to a location other than that of the display can often be the most affordable solution to a stubborn problem. Noise. Often times, space constraints or aestetics may prevent a machine from residing near the display. Some power-users often centralize their equipment to a machine room in the basement such as this  [http://ultimatemythtv.wordpress.com/ fellow] has.
  
Ultimately, if the machine that needs to be controlled is not within line-of-sight of the remote control or outside of it's nominal range, an IR receiver mounted in the viewing room can be wired to the remotely installed frontend. A classic example is the common practice of moving the machine to a cupboard or room [[under the stairs]] to because space isn't available in a small apartment.
+
Ultimately, if the machine that needs to be controlled is not within line-of-sight of the remote control or outside of it's nominal range, an IR receiver mounted in the viewing room can be wired to the remotely installed frontend. A classic example is the common practice of moving the machine to a cupboard or room [[Under The Stairs|under the stairs]] to because space isn't available in a small apartment.
  
Another popular practice with the advent of the wall mounted flat-panel display is to hide all of the existing home theatre equipment in a nearby closet or built into a rack enclosure behind a panel thus creating a streamlined or minimalist decor. In this scenario, each piece of equipmemnt would also need to have it's respective IR signal forwarded or "repeated". An [[IR - control system|IR control system][ would be used to collect, concentrate and then deliver the signals from any remote control to the proper piece of equipment (eg. HT receiver, sat/cable box, DVD).
+
Another popular practice with the advent of the wall mounted flat-panel display is to hide all of the existing home theatre equipment in a nearby closet or built into a rack enclosure behind a panel thus creating a streamlined or minimalist decor. In this scenario, each piece of equipmemnt would also need to have it's respective IR signal forwarded or "repeated". An IR control system would be used to collect, concentrate and then deliver the signals from any remote control to the proper piece of equipment (eg. HT receiver, sat/cable box, DVD).
  
 
===Overview of IR recievers===
 
===Overview of IR recievers===

Revision as of 09:52, 25 October 2007

General

Applications for extending IR receiver

Moving a MythTV (or any media center machine for that matter) to a location other than that of the display can often be the most affordable solution to a stubborn problem. Noise. Often times, space constraints or aestetics may prevent a machine from residing near the display. Some power-users often centralize their equipment to a machine room in the basement such as this fellow has.

Ultimately, if the machine that needs to be controlled is not within line-of-sight of the remote control or outside of it's nominal range, an IR receiver mounted in the viewing room can be wired to the remotely installed frontend. A classic example is the common practice of moving the machine to a cupboard or room under the stairs to because space isn't available in a small apartment.

Another popular practice with the advent of the wall mounted flat-panel display is to hide all of the existing home theatre equipment in a nearby closet or built into a rack enclosure behind a panel thus creating a streamlined or minimalist decor. In this scenario, each piece of equipmemnt would also need to have it's respective IR signal forwarded or "repeated". An IR control system would be used to collect, concentrate and then deliver the signals from any remote control to the proper piece of equipment (eg. HT receiver, sat/cable box, DVD).

Overview of IR recievers

Cabling for IR signals

Types of IR receivers

Bundled

Ready Built / Retail

DIY / Homebrew

Commercial


Preparing the plug end

Cut and prepare the receiver cable

Identify the cable conductors

Prepare and solder Category 5 to jack end of cable

Punching down to the telephone connecting block


Preparing the receiver end

Connecting receiver cable to RJ-45 modular connector

Connecting Category 5 cable to RJ45 keystone


References