Logitech Harmony 880 remote
From MythTV Official Wiki
The Harmony 880 Remote is a relatively expensive universal remote control. Given it's high price, it does offer a lot of flexibility in how it's programmed. Below are methods used by some community members:
I use this remote in conjunction with MCE IR sensor I based my setup from mod_mce. Expect updates as I clean this up!
Appendix A - MythTV /etc/lircd.conf
My /etc/lircd.conf looks like so:
#
# RC-6 config file
#
# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm
# http://home.hccnet.nl/m.majoor/pronto.pdf
#
# used by: Philips
#
#########
#
# Philips Media Center Edition remote control
# For use with the USB MCE ir receiver
#
# Dan Conti dconti|acm.wwu.edu
#
# Updated with codes for MCE 2005 Remote additional buttons
# *, #, Teletext, Red, Green, Yellow & Blue Buttons
# Note: TV power button transmits no code until programmed.
# Updated 12th September 2005
# Graham Auld - mce|graham.auld.me.uk
#
# Radio, Print, RecTV are only available on the HP Media Center remote control
#
begin remote
name mceusb
bits 16
flags RC6|CONST_LENGTH
eps 30
aeps 100
header 2667 889
one 444 444
zero 444 444
pre_data_bits 21
pre_data 0x37FF0
gap 105000
toggle_bit 22
rc6_mask 0x100000000
begin codes
Power 0x00007bf3 # no e2,e3
MyTV 0x00007bb9 # starts at af
MyMusic 0x00007bb8 # starts at af
MyPictures 0x00007bb6 # starts at af
MyVideos 0x00007bb5 # starts at af
Record 0x00007be8 # no e2,e3
Stop 0x00007be6 # no e2,e3
Pause 0x00007be7 # no e2,e3
Play 0x00007be9 # no e2,e3
Rewind 0x00007bea # no e2,e3
Forward 0x00007beb # no e2,e3
Replay 0x00007be4 # no e2,e3
Skip 0x00007be5 # no e2,e3
More 0x00007bf0 # no e2,e3
Back 0x00007bdc # no ba - d8
Left 0x00007bdf # no ba - d8
Right 0x00007bde # no ba - d8
Up 0x00007be1 # no ba - d8
Down 0x00007be0 # no ba - d8
OK 0x00007bdd # no ba - d8
VolUp 0x00007bef # no e2,e3
VolDown 0x00007bee # no e2,e3
ChanUp 0x00007bed # no e2,e3
ChanDown 0x00007bec # no e2,e3
Home 0x00007bf2 # no e2,e3
Mute 0x00007bf1 # no e2,e3
RecordedTV 0x00007bb7 # starts at af
Guide 0x00007bd9 # no ba - d8
LiveTV 0x00007bda # no ba - d8
DVDMenu 0x00007bdb # no ba - d8
One 0x00007bfe # no e2,e3
Two 0x00007bfd # no e2,e3
Three 0x00007bfc # no e2,e3
Four 0x00007bfb # no e2,e3
Five 0x00007bfa # no e2,e3
Six 0x00007bf9 # no e2,e3
Seven 0x00007bf8 # no e2,e3
Eight 0x00007bf7 # no e2,e3
Nine 0x00007bf6 # no e2,e3
Zero 0x00007bff # no e2,e3
Star 0x00007be2 # no e2,e3
Hash 0x00007be3 # no e2,e3
Clear 0x00007bf5 # no e2,e3
Enter 0x00007bf4 # no e2,e3
Red 0x00007ba4 # no e2,e3
Green 0x00007ba3 # no e2,e3
Yellow 0x00007ba2 # no e2,e3
Blue 0x00007ba1 # no e2,e3
Teletext 0x00007ba5 # no e2,e3
#Following are unused with Hauppauge MCE remote.
#redefine these to something else
Radio 0x00007baf # starts at af
Print 0x00007bb1 # starts at af
end codes
end remote
Appendix B - MythTV lircrc
my .lircrc file (which is sym linked to .mythtv/lircrc) looks like (Note this is a work in progress):
# Power button = Start/Stop MythTV program.
# Calls mythpowerbutton.sh script in ~/.mythtv to start a single instance
# of mythfrontend, or kill it if it's already running.
begin
button = Power
prog = irexec
repeat = 0
config = /home/christopher/.mythtv/mythpowerbutton.sh
end
# MyTV = Jump to live TV section.
# Config button defined via MythWeb's KeyBindings JumpPoints editor.
begin
prog = mythtv
button = MyTV
config = Ctrl+2
end
# MyMusic = Jump to MythMusic section.
# Config button defined via MythWeb's KeyBindings JumpPoints editor.
begin
prog = mythtv
button = MyMusic
config = Ctrl+3
end
# MyPictures = Jump to MythGallery section.
# Config button defined via MythWeb's KeyBindings JumpPoints editor.
begin
prog = mythtv
button = MyPictures
config = Ctrl+4
end
# MyVideos = Jump to MythVideo section.
# Config button defined via MythWeb's KeyBindings JumpPoints editor.
begin
prog = mythtv
button = MyVideos
config = Ctrl+5
end
#
# Recording controls.
#
# Record = Start recording.
begin
prog = mythtv
button = Record
config = r
end
# Stop = Back/Cancel.
begin
prog = mythtv
button = Stop
config = Esc
end
# Pause = Pause/Resume playback.
begin
prog = mythtv
button = Pause
config = p
end
# Play = Play recording/set bookmark.
begin
prog = mythtv
button = Play
config = Space
end
# Rewind = Slowly skip backwards in recording.
begin
prog = mythtv
button = Rewind
config = PgDown
end
# Forward = Slowly skip forwards in recording.
begin
prog = mythtv
button = Forward
config = PgUp
end
# Replay = Skip to previous commercial marker.
begin
prog = mythtv
button = Replay
config = q
end
# Skip = Skip to next commercial marker.
begin
prog = mythtv
button = Skip
config = z
end
#
# Directional controls.
#
# Back button = Back/Cancel.
begin
prog = mythtv
button = Back
config = Esc
end
# More = Bring up OSD & playlist menus.
begin
prog = mythtv
button = More
config = m
end
# Up = Scroll/Channel Up.
begin
prog = mythtv
button = Up
config = Up
repeat = 2
end
# Down = Scroll/Channel Down.
begin
prog = mythtv
button = Down
config = Down
repeat = 2
end
# Left = Scroll/Rewind left.
begin
prog = mythtv
button = Left
config = Left
repeat = 2
end
# Right = Scroll/Rewind right.
begin
prog = mythtv
button = Right
config = Right
repeat = 2
end
# OK = Select.
begin
prog = mythtv
button = OK
config = Return
end
#
# Quick controls.
#
# VolUp = Increase Volume.
begin
prog = mythtv
button = VolUp
config = F11
end
# VolDown = Decrease Volume.
begin
prog = mythtv
button = VolDown
config = F10
end
# Home = Jump to Main Menu section.
# Config button defined via MythWeb's KeyBindings JumpPoints editor.
begin
prog = mythtv
button = Home
config = Ctrl+1
end
# Mute = Turn sound off/on.
begin
prog = mythtv
button = Mute
config = |
end
# ChanUp = Scroll/Channel Up.
begin
prog = mythtv
button = ChanUp
config = Up
end
# ChanDown = Scroll/Channel Down.
begin
prog = mythtv
button = ChanDown
config = Down
end
# RecordedTV button = Jump to TV Recording Playback section.
# Config button defined via MythWeb's KeyBindings JumpPoints editor.
begin
prog = mythtv
button = RecordedTV
config = Ctrl+6
end
# Guide = Show EPG while in TV mode.
#begin
# prog = mythtv
# button = Guide
# config = s
#end
# Guide = Jump to Live TV In Guide section.
# Config button defined via MythWeb's KeyBindings JumpPoints editor.
begin
prog = mythtv
button = Guide
config = Ctrl+7
end
# LiveTV = Switch to previous channel.
begin
prog = mythtv
button = LiveTV
config = h
end
# DVDMenu = Show more information on selected items.
begin
prog = mythtv
button = DVDMenu
config = i
end
#
# Zero - Nine = Numbers 0 - 9.
#
begin
prog = mythtv
button = One
config = 1
end
begin
prog = mythtv
button = Two
config = 2
end
begin
prog = mythtv
button = Three
config = 3
end
begin
prog = mythtv
button = Four
config = 4
end
begin
prog = mythtv
button = Five
config = 5
end
begin
prog = mythtv
button = Six
config = 6
end
begin
prog = mythtv
button = Seven
config = 7
end
begin
prog = mythtv
button = Eight
config = 8
end
begin
prog = mythtv
button = Nine
config = 9
end
begin
prog = mythtv
button = Zero
config = 0
end
#
# Text controls.
#
# Star button = toggle Picture In Picture on/off.
begin
prog = mythtv
button = Full
config = V
end
# Hash (+ Number) = Show teletext, else show subtitles.
begin
prog = mythtv
button = Hash
config = t
end
# Clear button = change focus for PiP (to change channel in the other window)
begin
prog = mythtv
button = Blank
config = B
end
# Enter button = swap channels in PiP window.
begin
prog = mythtv
button = Enter
config = N
end
# Red = Red button for interactive screens.
begin
prog = mythtv
button = Red
config = F2
end
# Green = Green button for interactive screens.
begin
prog = mythtv
button = Green
config = F3
end
# Yellow = Yellow button for interactive screens.
begin
prog = mythtv
button = Yellow
config = F4
end
# Blue = Blue button for interactive screens.
begin
prog = mythtv
button = Blue
config = F5
end
# Teletext = Show interactive MHEG screens (Freeview's "Red Button")
begin
prog = mythtv
button = Teletext
config = F7
end
##
# MPlayer lirc setup.
#
# Used to control video playback in MythTV.
##
# MyTV = Toggle full-screen mode.
begin
prog = mplayer
button = MyTV
config = vo_fullscreen
end
# Stop = Stop playback and exit.
begin
prog = mplayer
button = Stop
config = quit
end
# Pause = Pause playback
begin
prog = mplayer
button = Pause
config = pause
end
# Play = Play if paused, else skip ahead 1 minute.
# Format = seek +(num of seconds you wish to skip).
begin
prog = mplayer
button = Play
config = seek +60
end
# Rewind = Skip back 10 seconds.
# Format = seek -(num of seconds you wish to skip).
begin
prog = mplayer
button = Rewind
config = seek -10
end
# Forward = Skip forward 10 seconds.
# Format = seek +(num of seconds you wish to skip).
begin
prog = mplayer
button = Forward
config = seek +10
end
# Replay = Skip backward 5 minutes.
# Format = seek -(num of seconds you wish to skip).
begin
prog = mplayer
button = Replay
config = seek -300
end
# Skip = Skip forward 5 minutes.
# Format = seek +(num of seconds you wish to skip).
begin
prog = mplayer
button = Skip
config = seek +300
end
# Back = Quit video playback.
begin
prog = mplayer
button = Back
config = quit
end
# More = Show OSD
begin
prog = mplayer
button = More
config = osd
end
# OK = Pause/resume playback.
begin
prog = mplayer
button = OK
config = pause
end
# VolUp = Increase volume.
# Format = seek +(amount of steps to increase).
begin
prog = mplayer
button = VoleUp
config = volume +5
end
# VolDown = Decrease volume.
# Format = seek -(amount of steps to decrease).
begin
prog = mplayer
button = VolDown
config = volume -5
end
# ChanUp = Skip to next entry in playlist.
begin
prog = mplayer
button = ChanUp
config = pt_step +1
end
# ChanDown = Skip to previous entry in playlist..
begin
prog = mplayer
button = ChanDown
config = pt_step -1
end
# Home = Cycle through available audio tracks.
begin
prog = mplayer
button = Home
config = switch_audio
end
# Mute = Turn sound off/on.
begin
prog = mplayer
button = Mute
config = mute
end
# RecordedTV button not used.
# Guide = Show OSD
begin
prog = mplayer
button = Guide
config = osd
end
# Four = Decrease gamma.
# Format = gamma -(num of steps to decrease).
begin
prog = mplayer
button = Four
config = gamma -1
end
# Five = Increase gamma.
# Format = gamma +(num of steps to increase).
begin
prog = mplayer
button = Five
config = gamma +1
end
# Six = Move subtitles towards top of screen.
# Format = sub_alignment +(num of steps to move up).
begin
prog = mplayer
button = Six
config = sub_pos -1
end
# Seven = Decrease hue.
# Format = hue -(num of steps to decrease).
begin
prog = mplayer
button = Seven
config = hue -1
end
# Eight = Increase hue.
# Format = hue +(num of steps to increase).
begin
prog = mplayer
button = Nine
config = sub_pos +1
end
# Zero = Increase saturation.
# Format = saturation +(num of steps to increase).
begin
prog = mplayer
button = Zero
config = saturation +1
end
# Hash = Cycle available subtitles.
begin
prog = mplayer
button = Hash
config = sub_select
end
# Red = Decrease contrast.
# Format = contrast -(num of steps to decrease).
begin
prog = mplayer
button = Red
config = contrast -1
end
# Green = Increase contrast.
# Format = contrast +(num of steps to increase).
begin
prog = mplayer
button = Green
config = contrast +1
end
# Yellow = Decrease brightness.
# Format = brightness -(num of steps to decrease).
begin
prog = mplayer
button = Yellow
config = brightness -1
end
# Blue = Increase brightness
# Format = brightness -(num of steps to increase).
begin
prog = mplayer
button = Blue
config = brightness +1
end
# Teletext = Decrease saturation.
# Format = saturation -(num of steps to decrease).
begin
prog = mplayer
button = Teletext
config = saturation -1
end
##
# xine key bindings.
# Automatically generated by xine-ui version 0.99.3.
# Customised by pepsi_max2k for use with my Hauppauge MCE remote, 28/05/06.
#
# Used to control DVD playback in MythTV.
##
# Power button = Close Xine (exits to MythTV)
begin
button = Power
prog = xine
config = Quit
end
# MyTV = Switch between playback and current menu.
begin
button = MyTV
prog = xine
config = Menu
end
# MyMusic = jump to Audio Menu
begin
button = MyMusic
prog = xine
config = AudioMenu
end
# MyPictures = jump to Subpicture Menu (aka subtitle menu)
begin
button = MyPictures
prog = xine
config = SubpictureMenu
end
# MyVideos = jump to Title Menu.
begin
button = MyVideos
prog = xine
config = TitleMenu
end
# Stop = stop playback of DVD.
begin
button = Stop
prog = xine
config = Stop
end
# Pause = playback pause toggle
begin
button = Pause
prog = xine
config = Pause
end
# Play = start playback
begin
button = Play
prog = xine
config = Play
end
# Rewind = set position to -30 seconds in current stream
begin
button = Rewind
prog = xine
config = SeekRelative-30
end
# Forward = set position to +30 seconds in current stream
begin
button = Forward
prog = xine
config = SeekRelative+30
end
# Replay = jump to next chapter
begin
button = Replay
prog = xine
config = EventNext
end
# Skip = jump to previous chapter
begin
button = Skip
prog = xine
config = EventPrior
end
# Back = Switch between playback and current menu.
begin
button = Back
prog = xine
config = Menu
end
# More = Display stream information using OSD
begin
button = More
prog = xine
config = OSDStreamInfos
end
# Up = Navigate up in menus.
begin
button = Up
prog = xine
config = EventUp
end
# Down = Navigate down in menus.
begin
button = Down
prog = xine
config = EventDown
end
# Left = Navigate left in menus.
begin
button = Left
prog = xine
config = EventLeft
end
# Right = Navigate right in menus.
begin
button = Right
prog = xine
config = EventRight
end
# OK = Select in menus.
begin
button = OK
prog = xine
config = EventSelect
end
# VolUp = increment audio volume
begin
button = VolUp
prog = xine
config = Volume+
end
# VolDown = decrement audio volume
begin
button = VolDown
prog = xine
config = Volume-
end
# ChanUp = jump to next chapter
begin
button = ChanUp
prog = xine
config = EventNext
end
# ChanDown = jump to previous chapter
begin
button = ChanDown
prog = xine
config = EventPrior
end
# Home = jump to previous chapter
begin
button = Home
prog = xine
config = EventPrior
end
# Mute = audio muting toggle
begin
button = Mute
prog = xine
config = Mute
end
# RecordedTV button = Jump to Root Menu
begin
button = RecordedTV
prog = xine
config = RootMenu
end
# Guide button not used.
# LiveTV button not used.
# DVDMenu button not used.
# One = select next audio channel.
begin
button = One
prog = xine
config = AudioChannelNext
end
# Two = select next sub picture (subtitle) channel
begin
button = Two
prog = xine
config = SpuNext
end
# Three = select next angle
begin
button = Three
prog = xine
config = EventAngleNext
end
# Four = select previous audio channel
begin
button = Four
prog = xine
config = AudioChannelPrior
end
# Five = select previous sub picture (subtitle) channel
begin
button = Five
prog = xine
config = SpuPrior
end
# Six = select previous angle
begin
button = Six
prog = xine
config = EventAnglePrior
end
# Seven = increase hue by 10
begin
button = Seven
prog = xine
config = HueControl+
end
# Eight = decrease hue by 10
begin
button = Eight
prog = xine
config = HueControl-
end
# Nine = cycle through aspect ratios.
begin
button = Nine
prog = xine
config = ToggleAspectRatio
end
# Zero = decrease saturation by 10
begin
button = Zero
prog = xine
config = SaturationControl-
end
# Star button not used.
# Hash button not used.
# Clear button not used.
# Enter button not used.
# Red = increase contrast by 10
begin
button = Red
prog = xine
config = ContrastControl+
end
# Green = decrease contrast by 10
begin
button = Green
prog = xine
config = ContrastControl-
end
# Yellow = increase brightness by 10
begin
button = Yellow
prog = xine
config = BrightnessControl+
end
# Blue = decrease brightness by 10
begin
button = Blue
prog = xine
config = BrightnessControl-
end
# Teletext = increase saturation by 10
begin
button = Teletext
prog = xine
config = SaturationControl+
end
##
# Unused xine commands.
##
#####
######
Navigation commands.
#######
####
# jump to Angle Menu
#begin
# button = One
# prog = xine
# repeat = 0
# config = AngleMenu
#end
######
########
Stream commands.
########
#######
# select and play next MRL in the playlist
# begin
# button = NextTrack
# prog = xine
# repeat = 0
# config = NextMrl
# end
# select and play previous MRL in the playlist
# begin
# button = PreviousTrack
# prog = xine
# repeat = 0
# config = PriorMrl
# end
# loop mode toggle
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = ToggleLoopMode
# end
# stop playback after played stream
# begin
# remote = xxxxx
# button = xxxxx
# prog = xine
# repeat = 0
# config = PlaylistStop
# end
# scan playlist to grab stream infos
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = ScanPlaylistInfo
# end
# add a mediamark from current playback
# begin
# remote = xxxxx
# button = xxxxx
# prog = xine
# repeat = 0
# config = AddMediamark
# end
# edit selected mediamark
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = MediamarkEditor
# end
#####
#######
Position commands.
'######
######
# set position to -60 seconds in current stream
#begin
# button = Rewind
# prog = xine
# repeat = 0
# config = SeekRelative-60
#end
# set position to +60 seconds in current stream
#begin
# button = Forward
# prog = xine
# repeat = 0
# config = SeekRelative+60
#end
# set position to -30 seconds in current stream
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = SeekRelative-30
# end
# set position to +30 seconds in current stream
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = SeekRelative+30
# end
# set position to -15 seconds in current stream
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = SeekRelative-15
# end
# set position to +15 seconds in current stream
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = SeekRelative+15
# end
# set position to beginning of current stream
# begin
# remote = xxxxx
# button = xxxxx
# prog = xine
# repeat = 0
# config = SetPosition0%
# end
# set position to 10% of current stream
# begin
# button = One
# prog = xine
# repeat = 0
# config = SetPosition10%
# end
# set position to 20% of current stream
# begin
# button = Two
# prog = xine
# repeat = 0
# config = SetPosition20%
# end
# set position to 30% of current stream
# begin
# button = Three
# prog = xine
# repeat = 0
# config = SetPosition30%
# end
# set position to 40% of current stream
# begin
# button = Four
# prog = xine
# repeat = 0
# config = SetPosition40%
# end
# set position to 50% of current stream
#begin
# button = Five
# prog = xine
# repeat = 0
# config = SetPosition50%
#end
# set position to 60% of current stream
#begin
# button = Six
# prog = xine
# repeat = 0
# config = SetPosition60%
#end
# set position to 70% of current stream
#begin
# button = Seven
# prog = xine
# repeat = 0
# config = SetPosition70%
#end
# set position to 80% of current stream
#begin
# button = Eight
# prog = xine
# repeat = 0
# config = SetPosition80%
#end
# set position to 90% of current stream
#begin
# button = Nine
# prog = xine
# repeat = 0
# config = SetPosition90%
#end
# set position in current stream to numeric percentage
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = SetPosition%
# end
# set position forward by numeric argument in current stream
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = SeekRelative+
# end
# set position back by numeric argument in current stream
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = SeekRelative-
# end
###
########
Speed commands.
#######
####
# reset playback speed
# begin
# remote = xxxxx
# button = xxxxx
# prog = xine
# repeat = 0
# config = SpeedReset
# end
# increment playback speed
# begin
# button = Forward
# prog = xine
# repeat = 0
# config = SpeedFaster
#end
# decrement playback speed
#begin
# button = Rewind
# prog = xine
# repeat = 0
# config = SpeedSlower
#end
######
#######
Volume commands.
#######
####
# increment amplification level
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = Amp+
# end
# decrement amplification level
# begin
# remote = xxxxx
# button = xxxxx
# prog = xine
# repeat = 0
# config = Amp-
# end
# reset amplification to default value
# begin
# remote = xxxxx
# button = xxxxx
# prog = xine
# repeat = 0
# config = ResetAmp
# end
####
######
Subtitle commands.
######
####
# select a subtitle file
# begin
# button = Hash
# prog = xine
# repeat = 0
# config = SubSelector
#end
###
#####
Display size commands.
####
##
# interlaced mode toggle
# begin
# remote = xxxxx
# button = xxxxx
# prog = xine
# repeat = 0
# config = ToggleInterleave
# end
# reduce the output window size by factor 1.2
# begin
# remote = xxxxx
# button = xxxxx
# prog = xine
# repeat = 0
# config = WindowReduce
# end
# enlarge the output window size by factor 1.2
# begin
# remote = xxxxx
# button = xxxxx
# prog = xine
# repeat = 0
# config = WindowEnlarge
# end
# set video output window to 50%
# begin
# remote = xxxxx
# button = xxxxx
# prog = xine
# repeat = 0
# config = Window50
# end
# set video output window to 100%
# begin
# remote = xxxxx
# button = xxxxx
# prog = xine
# repeat = 0
# config = Window100
# end
# set video output window to 200%
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = Window200
# end
# zoom in
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = ZoomIn
# end
# zoom out
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = ZoomOut
# end
# zoom in horizontally
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = ZoomInX
# end
# zoom out horizontally
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = ZoomOutX
# end
# zoom in vertically
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = ZoomInY
# end
# zoom out vertically
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = ZoomOutY
# end
# reset zooming
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = ZoomReset
# end
# resize output window to stream size
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = Zoom1:1
# end
# fullscreen toggle
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = ToggleFullscreen
# end
# Xinerama fullscreen toggle
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = ToggleXineramaFullscr
# end
####
#######
Xine config menu commands.
#######
####
# open file browser for hard drive
#begin
# button = xxxx
# prog = xine
# repeat = 0
# config = FileSelector
#end
# visibility toggle of help window
# begin
# button = 8
# prog = xine
# repeat = 0
# config = HelpShow
# end
# visibility toggle of video post effect window
# begin
# button = 7
# prog = xine
# repeat = 0
# config = VPProcessShow
# end
# toggle post effect usage
# begin
# button = 7
# prog = xine
# repeat = 0
# config = VPProcessEnable
# end
# visibility toggle of output window
# begin
# button = 6
# prog = xine
# repeat = 0
# config = ToggleWindowVisibility
# end
# bordered window toggle of output window
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = ToggleWindowBorder
# end
# visibility toggle of UI windows
# begin
# button = 5
# prog = xine
# repeat = 0
# config = ToggleVisibility
# end
# visibility toggle of control window
# begin
# button = 4
# prog = xine
# repeat = 0
# config = ControlShow
# end
# visibility toggle of mrl browser window
#begin
# button = 3
# prog = xine
# repeat = 0
# config = MrlBrowser
# end
# visibility toggle of playlist editor window
# begin
# button = 3
# prog = xine
# repeat = 0
# config = PlaylistEditor
#end
# visibility toggle of the setup window
# begin
# button = Hash
# prog = xine
# repeat = 0
# config = SetupShow
# end
# visibility toggle of the event sender window
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = EventSenderShow
# end
# visibility toggle of analog TV window
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = TVAnalogShow
# end
# visibility toggle of log viewer
# begin
# button = 2
# prog = xine
# repeat = 0
# config = ViewlogShow
#end
# visibility toggle of stream info window
# begin
# button = Teletext
# prog = xine
# repeat = 0
# config = StreamInfosShow
#end
######
#########
Miscelaneous commands.
#########
#####
# display MRL/Ident toggle
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = MrlIdentToggle
# end
# enter key binding editor
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = KeyBindingEditor
# end
# download a skin from the skin server
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = SkinDownload
# end
# grab pointer toggle
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = GrabPointer
# end
# toggle TV modes (on the DXR3)
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = ToggleTVmode
# end
# switch Monitor to DPMS standby mode
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = DPMSStandby
# end
# take a snapshot
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = Snapshot
# end
# eject the current medium
# begin
# remote = xxxxx
# button = xxxxx
# prog = xine
# repeat = 0
# config = Eject
# end
######
#########
Number commands.
#########
#####
# # enter the number 0
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = Number0
# end
#
# # enter the number 1
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = Number1
# end
#
# # enter the number 2
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = Number2
# end
#
# # enter the number 3
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = Number3
# end
#
# # enter the number 4
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = Number4
# end
#
# # enter the number 5
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = Number5
# end
#
# # enter the number 6
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = Number6
# end
#
# # enter the number 7
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = Number7
# end
# # enter the number 8
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = Number8
# end
#
# # enter the number 9
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = Number9
# end
#
# # add 10 to the next entered number
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = Number10add
# end
#####
########
Syncing commands.
########
#####
# change audio video syncing (delay video)
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = AudioVideoDecay+
# end
# change audio video syncing (delay audio)
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = AudioVideoDecay-
# end
# reset audio video syncing offset
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = AudioVideoDecayReset
# end
# change subtitle syncing (delay video)
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = SpuVideoDecay+
# end
# change subtitle syncing (delay subtitles)
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = SpuVideoDecay-
# end
# reset subtitle syncing offset
# begin
# button = xxxxx
# prog = xine
# repeat = 0
# config = SpuVideoDecayReset
# end
##
# End of xine key bindings.
##
