Logitech Harmony 880 remote

From MythTV Official Wiki
Revision as of 21:11, 5 May 2007 by Thereza (talk | contribs)

Jump to: navigation, search

The Harmony 880 Remote is a relatively expensive universal remote control. Given it's high price, it does offer a lot of flexibility in how it's programmed. Below are methods used by some community members:

Note: I added a MediaCenter PC in the Harmony Configurator and chose "GigaByte HA-91" and it worked with the following configuration. --Reza

Nasa

I use this remote in conjunction with MCE IR sensor I based my setup from mod_mce. Expect updates as I clean this up!

Note,

Appendix A - MythTV /etc/lircd.conf

My /etc/lircd.conf looks like so:

#
# RC-6 config file
#
# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm
#         http://home.hccnet.nl/m.majoor/pronto.pdf
#
# used by: Philips
#
#########
#
# Philips Media Center Edition remote control
# For use with the USB MCE ir receiver
#
# Dan Conti  dconti|acm.wwu.edu
#
# Updated with codes for MCE 2005 Remote additional buttons
# *, #, Teletext, Red, Green, Yellow & Blue Buttons
# Note: TV power button transmits no code until programmed.
# Updated 12th September 2005
# Graham Auld - mce|graham.auld.me.uk
#
# Radio, Print, RecTV are only available on the HP Media Center remote control
#

begin remote

  name mceusb
  bits           16
  flags RC6|CONST_LENGTH
  eps            30
  aeps          100

  header       2667   889
  one           444   444
  zero          444   444
  pre_data_bits 21
  pre_data      0x37FF0
  gap          105000
  toggle_bit     22
  rc6_mask     0x100000000


     begin codes

        Power           0x00007bf3      # no e2,e3
        MyTV            0x00007bb9      # starts at af
        MyMusic         0x00007bb8      # starts at af
        MyPictures      0x00007bb6      # starts at af
        MyVideos        0x00007bb5      # starts at af
        Record          0x00007be8      # no e2,e3
        Stop            0x00007be6      # no e2,e3
        Pause           0x00007be7      # no e2,e3
        Play            0x00007be9      # no e2,e3
        Rewind          0x00007bea      # no e2,e3
        Forward         0x00007beb      # no e2,e3
        Replay          0x00007be4      # no e2,e3
        Skip            0x00007be5      # no e2,e3
        More            0x00007bf0      # no e2,e3
        Back            0x00007bdc      # no ba - d8
        Left            0x00007bdf      # no ba - d8
        Right           0x00007bde      # no ba - d8
        Up              0x00007be1      # no ba - d8
        Down            0x00007be0      # no ba - d8
        OK              0x00007bdd      # no ba - d8
        VolUp           0x00007bef      # no e2,e3
        VolDown         0x00007bee      # no e2,e3
        ChanUp          0x00007bed      # no e2,e3
        ChanDown        0x00007bec      # no e2,e3
        Home            0x00007bf2      # no e2,e3
        Mute            0x00007bf1      # no e2,e3
        RecordedTV      0x00007bb7      # starts at af
        Guide           0x00007bd9      # no ba - d8
        LiveTV          0x00007bda      # no ba - d8
        DVDMenu         0x00007bdb      # no ba - d8
        One             0x00007bfe      # no e2,e3
        Two             0x00007bfd      # no e2,e3
        Three           0x00007bfc      # no e2,e3
        Four            0x00007bfb      # no e2,e3
        Five            0x00007bfa      # no e2,e3
        Six             0x00007bf9      # no e2,e3
        Seven           0x00007bf8      # no e2,e3
        Eight           0x00007bf7      # no e2,e3
        Nine            0x00007bf6      # no e2,e3
        Zero            0x00007bff      # no e2,e3
        Star            0x00007be2      # no e2,e3
        Hash            0x00007be3      # no e2,e3
        Clear           0x00007bf5      # no e2,e3
        Enter           0x00007bf4      # no e2,e3
        Red             0x00007ba4      # no e2,e3
        Green           0x00007ba3      # no e2,e3
        Yellow          0x00007ba2      # no e2,e3
        Blue            0x00007ba1      # no e2,e3
        Teletext        0x00007ba5      # no e2,e3

#Following are unused with Hauppauge MCE remote.
#redefine these to something else

        Radio           0x00007baf      # starts at af
        Print           0x00007bb1      # starts at af
      end codes
end remote


Appendix B - MythTV lircrc

my .lircrc file (which is sym linked to .mythtv/lircrc) looks like (Note this is a work in progress):


# Power button = Start/Stop MythTV program.
# Calls mythpowerbutton.sh script in ~/.mythtv to start a single instance
# of mythfrontend, or kill it if it's already running.
begin
     button = Power
     prog = irexec
     repeat = 0
     config = /home/christopher/.mythtv/mythpowerbutton.sh
end

# MyTV = Jump to live TV section.
# Config button defined via MythWeb's KeyBindings JumpPoints editor.
begin
    prog = mythtv
    button = MyTV
    config = Ctrl+2
end
# MyMusic = Jump to MythMusic section.
# Config button defined via MythWeb's KeyBindings JumpPoints editor.
begin
    prog = mythtv
    button = MyMusic
    config = Ctrl+3
end


# MyPictures = Jump to MythGallery section.
# Config button defined via MythWeb's KeyBindings JumpPoints editor.
begin
    prog = mythtv
    button = MyPictures
    config = Ctrl+4
end


# MyVideos = Jump to MythVideo section.
# Config button defined via MythWeb's KeyBindings JumpPoints editor.
begin
    prog = mythtv
    button = MyVideos
    config = Ctrl+5
end


#
# Recording controls.
#

# Record = Start recording.
begin
    prog = mythtv
    button = Record
    config = r
end


# Stop = Back/Cancel.
begin
    prog = mythtv
    button = Stop
    config = Esc
end


# Pause = Pause/Resume playback.
begin
    prog = mythtv
    button = Pause
    config = p
end


# Play = Play recording/set bookmark.
begin
    prog = mythtv
    button = Play
    config = Space
end


# Rewind = Slowly skip backwards in recording.
begin
    prog = mythtv
    button = Rewind
    config = PgDown
end


# Forward = Slowly skip forwards in recording.
begin
    prog = mythtv
    button = Forward
    config = PgUp
end


# Replay = Skip to previous commercial marker.
begin
    prog = mythtv
    button = Replay
    config = q
end


# Skip = Skip to next commercial marker.
begin
    prog = mythtv
    button = Skip
    config = z
end


#
# Directional controls.
#

# Back button = Back/Cancel.
begin
    prog = mythtv
    button = Back
    config = Esc
end


# More = Bring up OSD & playlist menus.
begin
    prog = mythtv
    button = More
    config = m
end


# Up = Scroll/Channel Up.
begin
    prog = mythtv
    button = Up
    config = Up
    repeat = 2
end


# Down = Scroll/Channel Down.
begin
    prog = mythtv
    button = Down
    config = Down
    repeat = 2
end


# Left = Scroll/Rewind left.
begin
    prog = mythtv
    button = Left
    config = Left
    repeat = 2
end


# Right = Scroll/Rewind right.
begin
    prog = mythtv
    button = Right
    config = Right
    repeat = 2
end


# OK = Select.
begin
    prog = mythtv
    button = OK
    config = Return
end


#
# Quick controls.
#

# VolUp = Increase Volume.
begin
    prog = mythtv
    button = VolUp
    config = F11
end
# VolDown = Decrease Volume.
begin
    prog = mythtv
    button = VolDown
    config = F10
end


# Home = Jump to Main Menu section.
# Config button defined via MythWeb's KeyBindings JumpPoints editor.
begin
    prog = mythtv
    button = Home
    config = Ctrl+1
end


# Mute = Turn sound off/on.
begin
    prog = mythtv
    button = Mute
    config = |

end


# ChanUp = Scroll/Channel Up.
begin
    prog = mythtv
    button = ChanUp
    config = Up
end


# ChanDown = Scroll/Channel Down.
begin
    prog = mythtv
    button = ChanDown
    config = Down
end


# RecordedTV button = Jump to TV Recording Playback section.
# Config button defined via MythWeb's KeyBindings JumpPoints editor.
begin
    prog = mythtv
    button = RecordedTV
    config = Ctrl+6
end


# Guide = Show EPG while in TV mode.
#begin
#    prog = mythtv
#    button = Guide
#    config = s
#end
# Guide = Jump to Live TV In Guide section.
# Config button defined via MythWeb's KeyBindings JumpPoints editor.
begin
    prog = mythtv
    button = Guide
    config = Ctrl+7
end


# LiveTV = Switch to previous channel.
begin
    prog = mythtv
    button = LiveTV
    config = h
end


# DVDMenu = Show more information on selected items.
begin
    prog = mythtv
    button = DVDMenu
    config = i
end


#
# Zero - Nine = Numbers 0 - 9.
#

begin
    prog = mythtv
    button = One
    config = 1
end

begin
    prog = mythtv
    button = Two
    config = 2
end

begin
    prog = mythtv
    button = Three
    config = 3
end

begin
    prog = mythtv
    button = Four
    config = 4
end

begin
    prog = mythtv
    button = Five
    config = 5
end

begin
    prog = mythtv
    button = Six
    config = 6
end

begin
    prog = mythtv
    button = Seven
    config = 7
end

begin
    prog = mythtv
    button = Eight
    config = 8
end

begin
    prog = mythtv
    button = Nine
    config = 9
end


begin
    prog = mythtv
    button = Zero
    config = 0
end


#
# Text controls.
#

# Star button = toggle Picture In Picture on/off.
begin
    prog = mythtv
    button = Full
    config = V
end

# Hash (+ Number) = Show teletext, else show subtitles.
begin
    prog = mythtv
    button = Hash
    config = t
 end

# Clear button = change focus for PiP (to change channel in the other window)
begin
    prog = mythtv
    button = Blank
    config = B
end

# Enter button = swap channels in PiP window.
begin
    prog = mythtv
    button = Enter
    config = N
end

# Red = Red button for interactive screens.
begin
   prog = mythtv
   button = Red
   config = F2
end

# Green = Green button for interactive screens.
begin
   prog = mythtv
   button = Green
   config = F3
end

# Yellow = Yellow button for interactive screens.
begin
   prog = mythtv
   button = Yellow
   config = F4
end

# Blue = Blue button for interactive screens.
begin
   prog = mythtv
   button = Blue
   config = F5
end

# Teletext = Show interactive MHEG screens (Freeview's "Red Button")
begin
    prog = mythtv
    button = Teletext
    config = F7
 end
##
# MPlayer lirc setup.
#
# Used to control video playback in MythTV.
##

# MyTV = Toggle full-screen mode.
begin
    prog = mplayer
    button = MyTV
    config = vo_fullscreen
end

# Stop = Stop playback and exit.
begin
    prog = mplayer
    button = Stop
    config = quit
end

# Pause = Pause playback
begin
    prog = mplayer
    button = Pause
    config = pause
end

# Play = Play if paused, else skip ahead 1 minute.
# Format = seek +(num of seconds you wish to skip).
begin
    prog = mplayer
    button = Play
    config = seek +60
end

# Rewind = Skip back 10 seconds.
# Format = seek -(num of seconds you wish to skip).
begin
    prog = mplayer
    button = Rewind
    config = seek -10
end

# Forward = Skip forward 10 seconds.
# Format = seek +(num of seconds you wish to skip).
begin
    prog = mplayer
    button = Forward
    config = seek +10
end

# Replay = Skip backward 5 minutes.
# Format = seek -(num of seconds you wish to skip).
begin
    prog = mplayer
    button = Replay
    config = seek -300
end


# Skip = Skip forward 5 minutes.
# Format = seek +(num of seconds you wish to skip).
begin
    prog = mplayer
    button = Skip
    config = seek +300
end


# Back = Quit video playback.
begin
    prog = mplayer
    button = Back
    config = quit
end


# More = Show OSD
begin
    prog = mplayer
    button = More
    config = osd
end

# OK = Pause/resume playback.
begin
    prog = mplayer
    button = OK
    config = pause
end


# VolUp = Increase volume.
# Format = seek +(amount of steps to increase).
begin
    prog = mplayer
    button = VoleUp
    config = volume +5
end

# VolDown = Decrease volume.
# Format = seek -(amount of steps to decrease).
begin
    prog = mplayer
    button = VolDown
    config = volume -5
end


# ChanUp = Skip to next entry in playlist.
begin
    prog = mplayer
    button = ChanUp
    config = pt_step +1
end


# ChanDown = Skip to previous entry in playlist..
begin
    prog = mplayer
    button = ChanDown
    config = pt_step -1
end


# Home = Cycle through available audio tracks.
begin
    prog = mplayer
    button = Home
    config = switch_audio
end


# Mute = Turn sound off/on.
begin
    prog = mplayer
    button = Mute
    config = mute
end


# RecordedTV button not used.


# Guide = Show OSD
begin
    prog = mplayer
    button = Guide
    config = osd
end

# Four = Decrease gamma.
# Format = gamma -(num of steps to decrease).
begin
    prog = mplayer
    button = Four
    config = gamma -1
end

# Five = Increase gamma.
# Format = gamma +(num of steps to increase).
begin
    prog = mplayer
    button = Five
    config = gamma +1
end

# Six = Move subtitles towards top of screen.
# Format = sub_alignment +(num of steps to move up).
begin
    prog = mplayer
    button = Six
    config = sub_pos -1
end

# Seven = Decrease hue.
# Format = hue -(num of steps to decrease).
begin
    prog = mplayer
    button = Seven
    config = hue -1
end


# Eight = Increase hue.
# Format = hue +(num of steps to increase).
begin
    prog = mplayer
    button = Nine
    config = sub_pos +1
end


# Zero = Increase saturation.
# Format = saturation +(num of steps to increase).
begin
    prog = mplayer
    button = Zero
    config = saturation +1
end


# Hash = Cycle available subtitles.
begin
    prog = mplayer
    button = Hash
    config = sub_select
end

# Red = Decrease contrast.
# Format = contrast -(num of steps to decrease).
begin
    prog = mplayer
    button = Red
    config = contrast -1
end

# Green = Increase contrast.
# Format = contrast +(num of steps to increase).
begin
    prog = mplayer
    button = Green
    config = contrast +1
end

# Yellow = Decrease brightness.
# Format = brightness -(num of steps to decrease).
begin
    prog = mplayer
    button = Yellow
    config = brightness -1
end


# Blue = Increase brightness
# Format = brightness -(num of steps to increase).
begin
    prog = mplayer
    button = Blue
    config = brightness +1
end


# Teletext = Decrease saturation.
# Format = saturation -(num of steps to decrease).
begin
    prog = mplayer
    button = Teletext
    config = saturation -1
end
##
# xine key bindings.
# Automatically generated by xine-ui version 0.99.3.
# Customised by pepsi_max2k for use with my Hauppauge MCE remote, 28/05/06.
#
# Used to control DVD playback in MythTV.
##


# Power button = Close Xine (exits to MythTV)
begin
    button = Power
    prog   = xine
    config = Quit
end


# MyTV = Switch between playback and current menu.
begin
    button = MyTV
    prog   = xine
    config = Menu
end


# MyMusic = jump to Audio Menu
begin
    button = MyMusic
    prog   = xine
    config = AudioMenu
end


# MyPictures = jump to Subpicture Menu (aka subtitle menu)
begin
    button = MyPictures
    prog   = xine
    config = SubpictureMenu
end


# MyVideos = jump to Title Menu.
begin
    button = MyVideos
    prog   = xine
    config = TitleMenu
end


# Stop = stop playback of DVD.
begin
    button = Stop
    prog   = xine
    config = Stop
end


# Pause = playback pause toggle
begin
    button = Pause
    prog   = xine
    config = Pause
end


# Play = start playback
begin
    button = Play
    prog   = xine
    config = Play
end


# Rewind = set position to -30 seconds in current stream
begin
    button = Rewind
    prog   = xine
    config = SeekRelative-30
end


# Forward = set position to +30 seconds in current stream
begin
    button = Forward
    prog   = xine
    config = SeekRelative+30
end


# Replay = jump to next chapter
begin
    button = Replay
    prog   = xine
    config = EventNext
end


# Skip = jump to previous chapter
begin
    button = Skip
    prog   = xine
    config = EventPrior
end


# Back = Switch between playback and current menu.
begin
    button = Back
    prog   = xine
    config = Menu
end
 # More = Display stream information using OSD
begin
    button = More
    prog   = xine
    config = OSDStreamInfos
end


# Up = Navigate up in menus.
begin
    button = Up
    prog   = xine
    config = EventUp
end


# Down = Navigate down in menus.
begin
    button = Down
    prog   = xine
    config = EventDown
end


# Left = Navigate left in menus.
begin
    button = Left
    prog   = xine
    config = EventLeft
end


# Right =  Navigate right in menus.
begin
    button = Right
    prog   = xine
    config = EventRight
end


# OK = Select in menus.
begin
    button = OK
    prog   = xine
    config = EventSelect
end


# VolUp = increment audio volume
begin
    button = VolUp
    prog   = xine
    config = Volume+
end


# VolDown = decrement audio volume
begin
    button = VolDown
    prog   = xine
    config = Volume-
end


# ChanUp = jump to next chapter
begin
    button = ChanUp
    prog   = xine
    config = EventNext
end


# ChanDown = jump to previous chapter
begin
    button = ChanDown
    prog   = xine
    config = EventPrior
end


# Home = jump to previous chapter
begin
    button = Home
    prog   = xine
    config = EventPrior
end


# Mute = audio muting toggle
begin
    button = Mute
    prog   = xine
    config = Mute
end


# RecordedTV button = Jump to Root Menu
begin
    button = RecordedTV
    prog   = xine
    config = RootMenu
end


# Guide button not used.
# LiveTV button not used.
# DVDMenu button not used.


# One = select next audio channel.
begin
    button = One
    prog   = xine
    config = AudioChannelNext
end


# Two = select next sub picture (subtitle) channel
begin
    button = Two
    prog   = xine
    config = SpuNext
end


# Three = select next angle
begin
    button = Three
    prog   = xine
    config = EventAngleNext
end


# Four = select previous audio channel
begin
    button = Four
    prog   = xine
    config = AudioChannelPrior
end


# Five = select previous sub picture (subtitle) channel
begin
    button = Five
    prog   = xine
    config = SpuPrior
end


# Six = select previous angle
begin
    button = Six
    prog   = xine
    config = EventAnglePrior
end


# Seven = increase hue by 10
begin
    button = Seven
    prog   = xine
    config = HueControl+
end


# Eight = decrease hue by 10
begin
    button = Eight
    prog   = xine
    config = HueControl-
end
 # Nine = cycle through aspect ratios.
begin
    button = Nine
    prog   = xine
    config = ToggleAspectRatio
end


# Zero = decrease saturation by 10
begin
    button = Zero
    prog   = xine
    config = SaturationControl-
end


# Star button not used.
# Hash button not used.
# Clear button not used.
# Enter button not used.


# Red = increase contrast by 10
begin
    button = Red
    prog   = xine
    config = ContrastControl+
end


# Green = decrease contrast by 10
begin
    button = Green
    prog   = xine
    config = ContrastControl-
end


# Yellow = increase brightness by 10
begin
    button = Yellow
    prog   = xine
    config = BrightnessControl+
end


# Blue = decrease brightness by 10
begin
    button = Blue
    prog   = xine
    config = BrightnessControl-
end


# Teletext = increase saturation by 10
begin
    button = Teletext
    prog   = xine
    config = SaturationControl+
end



##
# Unused xine commands.
##

#####
######
Navigation commands.
#######
####

# jump to Angle Menu
#begin
#       button = One
#       prog   = xine
#       repeat = 0
#       config = AngleMenu
#end


######
########
Stream commands.
########
#######

# select and play next MRL in the playlist
# begin
#       button = NextTrack
#       prog   = xine
#       repeat = 0
#       config = NextMrl
# end

# select and play previous MRL in the playlist
# begin
#       button = PreviousTrack
#       prog   = xine
#       repeat = 0
#       config = PriorMrl
# end

# loop mode toggle
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = ToggleLoopMode
# end

# stop playback after played stream
# begin
   #       remote = xxxxx
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = PlaylistStop
# end

# scan playlist to grab stream infos
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = ScanPlaylistInfo
# end

# add a mediamark from current playback
# begin
#       remote = xxxxx
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = AddMediamark
# end

# edit selected mediamark
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = MediamarkEditor
# end


#####
#######
Position commands.
'######
######

# set position to -60 seconds in current stream
#begin
#       button = Rewind
#       prog   = xine
#       repeat = 0
#       config = SeekRelative-60
#end

# set position to +60 seconds in current stream
#begin
#       button = Forward
#       prog   = xine
#       repeat = 0
#       config = SeekRelative+60
#end

# set position to -30 seconds in current stream
# begin
 #       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = SeekRelative-30
# end

# set position to +30 seconds in current stream
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = SeekRelative+30
# end

# set position to -15 seconds in current stream
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = SeekRelative-15
# end

# set position to +15 seconds in current stream
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = SeekRelative+15
# end

# set position to beginning of current stream
# begin
#       remote = xxxxx
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = SetPosition0%
# end

# set position to 10% of current stream
# begin
#       button = One
#       prog   = xine
#       repeat = 0
#       config = SetPosition10%
# end

# set position to 20% of current stream
# begin
#       button = Two
#       prog   = xine
#       repeat = 0
#       config = SetPosition20%
# end

# set position to 30% of current stream
# begin
 #       button = Three
#       prog   = xine
#       repeat = 0
#       config = SetPosition30%
# end

# set position to 40% of current stream
# begin
#       button = Four
#       prog   = xine
#       repeat = 0
#       config = SetPosition40%
# end

# set position to 50% of current stream
#begin
#       button = Five
#       prog   = xine
#       repeat = 0
#       config = SetPosition50%
#end

# set position to 60% of current stream
#begin
#       button = Six
#       prog   = xine
#       repeat = 0
#       config = SetPosition60%
#end

# set position to 70% of current stream
#begin
#       button = Seven
#       prog   = xine
#       repeat = 0
#       config = SetPosition70%
#end

# set position to 80% of current stream
#begin
#       button = Eight
#       prog   = xine
#       repeat = 0
#       config = SetPosition80%
#end

# set position to 90% of current stream
#begin
#       button = Nine
#       prog   = xine
#       repeat = 0
#       config = SetPosition90%
#end

# set position in current stream to numeric percentage
# begin
#       button = xxxxx
        #       prog   = xine
#       repeat = 0
#       config = SetPosition%
# end

# set position forward by numeric argument in current stream
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = SeekRelative+
# end

# set position back by numeric argument in current stream
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = SeekRelative-
# end



###
########
Speed commands.
#######
####

# reset playback speed
# begin
#       remote = xxxxx
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = SpeedReset
# end

# increment playback speed
# begin
#       button = Forward
#       prog   = xine
#       repeat = 0
#       config = SpeedFaster
#end

# decrement playback speed
#begin
#       button = Rewind
#       prog   = xine
#       repeat = 0
#       config = SpeedSlower
#end


######
#######
   Volume commands.
#######
####

# increment amplification level
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = Amp+
# end

# decrement amplification level
# begin
#       remote = xxxxx
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = Amp-
# end

# reset amplification to default value
# begin
#       remote = xxxxx
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = ResetAmp
# end



####
######
Subtitle commands.
######
####

# select a subtitle file
# begin
#       button = Hash
#       prog   = xine
#       repeat = 0
#       config = SubSelector
#end


###
#####
Display size commands.
####
##

# interlaced mode toggle
# begin
#       remote = xxxxx
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = ToggleInterleave
# end

# reduce the output window size by factor 1.2
# begin
#       remote = xxxxx
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = WindowReduce
# end

# enlarge the output window size by factor 1.2
# begin
#       remote = xxxxx
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = WindowEnlarge
# end

# set video output window to 50%
# begin
#       remote = xxxxx
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = Window50
# end

# set video output window to 100%
# begin
#       remote = xxxxx
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = Window100
# end

# set video output window to 200%
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = Window200
# end

# zoom in
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = ZoomIn
# end
# zoom out
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = ZoomOut
# end

# zoom in horizontally
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = ZoomInX
# end

# zoom out horizontally
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = ZoomOutX
# end

# zoom in vertically
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = ZoomInY
# end

# zoom out vertically
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = ZoomOutY
# end

# reset zooming
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = ZoomReset
# end

# resize output window to stream size
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = Zoom1:1
# end

# fullscreen toggle
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = ToggleFullscreen
# end

# Xinerama fullscreen toggle
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = ToggleXineramaFullscr
# end


####
#######
Xine config menu commands.
#######
####

# open file browser for hard drive
#begin
#       button = xxxx
#       prog   = xine
#       repeat = 0
#       config = FileSelector
#end

# visibility toggle of help window
# begin
#       button = 8
#       prog   = xine
#       repeat = 0
#       config = HelpShow
# end

# visibility toggle of video post effect window
# begin
#       button = 7
#       prog   = xine   
#       repeat = 0
#       config = VPProcessShow
# end

# toggle post effect usage
# begin
#       button = 7
#       prog   = xine
#       repeat = 0
#       config = VPProcessEnable
# end

# visibility toggle of output window
# begin
#       button = 6
#       prog   = xine
#       repeat = 0
#       config = ToggleWindowVisibility
# end

# bordered window toggle of output window
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = ToggleWindowBorder
# end

# visibility toggle of UI windows
# begin
#       button = 5
#       prog   = xine
#       repeat = 0
#       config = ToggleVisibility
# end

# visibility toggle of control window
# begin
#       button = 4
#       prog   = xine
#       repeat = 0
#       config = ControlShow
# end

# visibility toggle of mrl browser window
#begin
#       button = 3
#       prog   = xine
#       repeat = 0
#       config = MrlBrowser
# end

# visibility toggle of playlist editor window
# begin
#   button = 3
#       prog   = xine
#       repeat = 0
#       config = PlaylistEditor
#end

# visibility toggle of the setup window
# begin
#       button = Hash
#       prog   = xine
#       repeat = 0
#       config = SetupShow
# end

# visibility toggle of the event sender window
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = EventSenderShow
# end

# visibility toggle of analog TV window
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = TVAnalogShow
# end

# visibility toggle of log viewer
# begin
#       button = 2
#       prog   = xine
#       repeat = 0
#       config = ViewlogShow
#end

# visibility toggle of stream info window
# begin
#       button = Teletext
#       prog   = xine
#       repeat = 0
#       config = StreamInfosShow
#end



######
#########
Miscelaneous commands.
#########
#####

# display MRL/Ident toggle
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = MrlIdentToggle
# end

# enter key binding editor
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = KeyBindingEditor
# end

# download a skin from the skin server
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = SkinDownload
# end

# grab pointer toggle
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = GrabPointer
# end

# toggle TV modes (on the DXR3)
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = ToggleTVmode
# end

# switch Monitor to DPMS standby mode
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = DPMSStandby
# end

# take a snapshot
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = Snapshot
# end

# eject the current medium
# begin
#       remote = xxxxx
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = Eject
# end


######
#########
Number commands.
#########
#####

# # enter the number 0
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = Number0
# end
# 
# # enter the number 1
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = Number1
# end
# 
# # enter the number 2
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = Number2
# end
# 
# # enter the number 3
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = Number3
# end
# 
# # enter the number 4
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = Number4
# end
# 
# # enter the number 5
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = Number5
# end
# 
# # enter the number 6
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = Number6
# end
# 
# # enter the number 7
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = Number7
# end
# # enter the number 8
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = Number8
# end
# 
# # enter the number 9
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = Number9
# end
# 
# # add 10 to the next entered number
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = Number10add
# end


#####
########
Syncing commands.
########
#####

# change audio video syncing (delay video)
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = AudioVideoDecay+
# end

# change audio video syncing (delay audio)
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = AudioVideoDecay-
# end

# reset audio video syncing offset
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = AudioVideoDecayReset
# end

# change subtitle syncing (delay video)
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = SpuVideoDecay+
# end

# change subtitle syncing (delay subtitles)
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = SpuVideoDecay-
# end

# reset subtitle syncing offset
# begin
#       button = xxxxx
#       prog   = xine
#       repeat = 0
#       config = SpuVideoDecayReset
# end


##
# End of xine key bindings.
##