Difference between revisions of "Minimyth Howto"
Mitchell2345 (talk | contribs) |
Jamesarbrown (talk | contribs) (Added lot more detail, corrected errors over multiple FE/MAC addresses etc) |
||
(2 intermediate revisions by one other user not shown) | |||
Line 1: | Line 1: | ||
− | = | + | == Minimyth - PXE NetworkBoot Example== |
− | |||
− | |||
+ | Minimyth is a light linux distribution for Mythfrontend. This is an example of a typical setup utilising the main features including network boot. The backend in this example is a Mythdora Box. | ||
+ | |||
+ | It loads the distro across the network into memory. There is no HDD or any other storage device. | ||
+ | |||
+ | For links and other guides try [[Minimyth]] | ||
+ | |||
+ | ==Example== | ||
+ | |||
+ | ====Network Topology==== | ||
+ | |||
+ | +----------------------+ +-----------------------+ | ||
+ | |MythTv Backend Server | |tv1 | | ||
+ | |IP : 192.168.1.90 | +-----|192.168.1.91 | | ||
+ | |Static IP | | |Runs : Minimyth | | ||
+ | |Runs : MythBackend, |---+ |MAC : 00:40:63:EF:7E:D2| | ||
+ | | dhcpd, | | +-----------------------+ | ||
+ | | tftp, samba | | +-----------------------+ | ||
+ | +----------------------+ +-----|tvConserv | | ||
+ | |192.168.1.92 | | ||
+ | |Runs : Minimyth | | ||
+ | |MAC : 48:5B:39:95:16:B5| | ||
+ | +-----------------------+ | ||
+ | |||
+ | |||
+ | ====Get the MAC Address of your frontend==== | ||
+ | You will need to enter setup on the BIOS and disable usual boot methods (ie CDROM, HDD) etc and track down the setting to enable network boot.<BR> | ||
+ | |||
+ | One this is done, fire up your box and you will see it will show up its MAC address as it looks for a DHCP server.<BR> | ||
+ | |||
+ | It will fail as we have not got everything setup yet, but write down the MAC address as we are going to need it later. The MAC address is prefixed '01-', in some cases below the '01-' is needed, for DHCPD server strip off the '01-' | ||
+ | |||
+ | ====DHCPD Server==== | ||
+ | |||
+ | To install a dhcpd server on your backend | ||
+ | # yum install dhcpd | ||
+ | |||
+ | The create the config file /etc/dhcp/dhcpd.conf | ||
+ | #Basic dhcpd.conf | ||
+ | |||
+ | # option definitions common to all supported networks... | ||
+ | option domain-name "mydomain.com"; | ||
+ | default-lease-time 600; | ||
+ | get-lease-hostnames true; | ||
+ | max-lease-time 7200; | ||
+ | authoritative; | ||
+ | log-facility local7; | ||
+ | allow booting; | ||
allow bootp; | allow bootp; | ||
− | + | option domain-name-servers 192.168.1.1, 158.152.1.58; | |
− | |||
− | |||
− | |||
− | |||
option routers 192.168.1.1; | option routers 192.168.1.1; | ||
− | option | + | option ntp-servers 0.fedora.pool.ntp.org, 1.fedora.pool.ntp.org, 2.fedora.pool.ntp.org; |
− | option | + | # leasable addresses |
− | + | subnet 192.168.1.0 netmask 255.255.255.0 { | |
− | + | range 192.168.1.220 192.168.1.250; } | |
− | + | host tv1 { | |
+ | hardware ethernet 00:40:63:EF:7E:D2; | ||
+ | fixed-address 192.168.1.91; | ||
+ | next-server 192.168.1.90; | ||
+ | filename "PXEClient/pxelinux.0"; | ||
+ | option host-name "tv1"; } | ||
+ | host tvConserv { | ||
+ | hardware ethernet 48:5B:39:95:16:B5; | ||
+ | fixed-address 192.168.1.92; | ||
+ | next-server 192.168.1.90; | ||
+ | filename "PXEClient/pxelinux.0"; | ||
+ | option host-name "tvConserv"; } | ||
+ | |||
+ | Enable the service | ||
+ | #chkconfig --levels 2345 dhcpd on | ||
− | + | NOTE : The hostname is important as the directory structure will look for the config files per that hostname | |
− | + | ||
+ | ====tftp Server==== | ||
+ | |||
+ | To install tftp (Trivial File Transfer Protocol) | ||
+ | # yum install tftp-server | ||
+ | |||
+ | Tftp uses the Xinetd service (ie provides the service on demand) | ||
+ | Most installs will automatically create the xinetd.d files, but we need to ammend them | ||
+ | to provide write access to the server. (Ie the flags -c -v -s) | ||
+ | |||
+ | # default: off | ||
+ | # description: The tftp server serves files using the trivial file transfer \ | ||
+ | # protocol. The tftp protocol is often used to boot diskless \ | ||
+ | # workstations, download configuration files to network-aware printers, \ | ||
+ | # and to start the installation process for some operating systems. | ||
+ | service tftp | ||
+ | { | ||
+ | disable = no | ||
+ | socket_type = dgram | ||
+ | protocol = udp | ||
+ | wait = yes | ||
+ | user = root | ||
+ | server = /usr/sbin/in.tftpd | ||
+ | server_args = -c -v -s /tftpboot | ||
+ | per_source = 11 | ||
+ | cps = 100 2 | ||
+ | flags = IPv4 | ||
} | } | ||
− | + | ====Samba Server for file access==== | |
+ | In this example we need to access the backend file storage system. On the server in the example MythBackend folders are in the folder /storage. | ||
+ | |||
+ | To export this as a share in the samba server we need to add the following to the end of /etc/samba/smb.conf | ||
+ | [storage] | ||
+ | comment = MythTV Data Storage | ||
+ | path = /storage | ||
+ | writable = yes | ||
+ | create mask = 0660 | ||
+ | force create mode = 0660 | ||
+ | force directory mode = 777 | ||
+ | directory mask = 0777 | ||
− | + | Ensure the samba server is set to start on boot | |
− | + | #chkconfig --levels 2345 smbd on | |
− | + | ||
− | + | Note in the minimyth.conf file below, how this is accessed. | |
− | + | ||
− | + | ====Directory Structure and Base Files==== | |
− | + | ||
− | + | Create a directory structure as follows | |
+ | #mkdir /tftpboot | ||
+ | #mkdir /tftpboot/PXEClient | ||
+ | #mkdir /tftpboot/PXEClient/conf/tv1 | ||
+ | #mkdir /tftpboot/PXEClient/conf/tvConserv | ||
+ | #mkdir /tftpboot/PXEClient/conf-rw | ||
+ | #mkdir /tftpboot/PXEClient/pxelinux.cfg | ||
− | + | You will then need to populate with some basic files (adjust downloads accordingly) | |
− | + | Minimyth for i686 (Note VIA processors now are also i686 NOT c7) | |
− | + | #cd /tftpboot/PXEClient | |
− | + | #wget http://www.minimyth.org/download/test/latest-0.23/ram-minimyth-0.23.1-73b12.tar.bz2 | |
− | + | #tar -xjf ram-minimyth-0.23.1-73b12.tar.bz | |
− | + | ||
− | + | ====PXELinux Loader==== | |
− | / | + | For all Distros |
+ | #cd /tftpboot/PXEClient | ||
+ | #mkdir temp | ||
+ | #cd temp | ||
+ | #wget http://www.kernel.org/pub/linux/utils/boot/syslinux/syslinux-4.02.tar.gz | ||
+ | #gunzip syslinux-4.02.tar.gz | ||
+ | #tar -xvf syslinux-4.02.tar | ||
+ | #cd syslinux-4.02/core/ | ||
+ | #cp pxelinux.0 /tftpboot/PXEClient/ | ||
+ | #cd /tftpboot/PXEClient | ||
+ | #chmod +x pxelinux.0 | ||
+ | #rm -rf temp | ||
− | + | Some distros such as Fedora | |
pxelinux.0 file is provided by syslinux.i386 installed via yum | pxelinux.0 file is provided by syslinux.i386 installed via yum | ||
− | yum -y install syslinux.i386 | + | #yum -y install syslinux.i386 |
yum will dump the file in /usr/lib/syslinux/pxelinux.0 so you will have to copy it to you tftpboot dir | yum will dump the file in /usr/lib/syslinux/pxelinux.0 so you will have to copy it to you tftpboot dir | ||
− | cp /usr/lib/syslinux/pxelinux.0 /tftpboot/PXEClient/ | + | #cp /usr/lib/syslinux/pxelinux.0 /tftpboot/PXEClient/ |
− | + | ====PXELinux Config Files==== | |
+ | You can create a PXELinux loader for each MAC address, or a generic one called 'default' for all machines. Good if all your machines are same architecture and using same ram-minimyth file. In this example we will create one per MAC address even though they are the same. | ||
− | + | #cd /tftpboot/PXEClient/pxelinux.cfg | |
− | + | ||
− | + | Create a file 01-00-40-63-ef-7e-d2 | |
− | + | DEFAULT minimyth-ram | |
− | + | LABEL minimyth-ram | |
− | + | KERNEL ram-minimyth-0.23.1-73b12/kernel | |
− | + | APPEND ro root=/dev/ram0 ramdisk_size=96000 initrd=ram-minimyth-0.23.1-73b12/rootfs | |
− | |||
− | + | And one called 01-48-5b-39-95-16-b5 (which in this case is the same contents) | |
− | + | DEFAULT minimyth-ram | |
− | + | LABEL minimyth-ram | |
+ | KERNEL ram-minimyth-0.23.1-73b12/kernel | ||
+ | APPEND ro root=/dev/ram0 ramdisk_size=96000 initrd=ram-minimyth-0.23.1-73b12/rootfs | ||
− | + | The last things you need now are minimyth config files. These all go under the applicable /tftpboot/PXEClient/conf/frontend_hostname/ | |
− | + | - minimyth.conf //Main Configuration file | |
− | + | - lircd.conf //Lirc read file for the remote | |
− | + | - lircrc.mythtv //How to translate that remote for Mythtv | |
− | + | - lircrc.xine //How to translate that remote for Xine | |
− | + | - lircrc.vlc etc etc | |
− | + | Example minimyth.conf below. | |
− | |||
− | == | + | ====Permissions Cleanup==== |
− | |||
− | + | #chown -R nobody /tftpboot/PXEClient | |
+ | #chgrp -R nobody /tftpboot/PXEClient | ||
+ | #chmod 777 /tftpboot/PXEClient/conf-rw | ||
− | = | + | ====minimyth.conf==== |
− | + | This is the "magical" part about Minimyth and its immense strength. You create a file called minimyth.conf that each frontend picks up and configures Myth to suit that machine. The magical part is, when you upgrade your minimyth for fixes, you do not have to re-setup like a standard box. The new minimyth will pull in the minimyth.conf, setup xorg, video profiles and so on. | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | Here is a typical minimyth.conf (for Openchrome Via CLE266 with TV out and homebrew LIRC receiver on Com Port 1) | |
+ | ################################################################################ | ||
+ | # minimyth.conf | ||
+ | # | ||
+ | # The required MiniMyth configuration file. | ||
+ | # | ||
+ | # For information on this file, see either | ||
+ | # <http://minimyth.org/document.shtml> | ||
+ | # or | ||
+ | # <http://{minimyth}/document.shtml>, | ||
+ | # where '{minimyth}' is the IPv4 address or hostname of your MiniMyth system. | ||
+ | ################################################################################ | ||
+ | ################################################################################ | ||
+ | # The following line will fetch and include a file named 'minimyth-common.conf' | ||
+ | # from the MiniMyth read-only configuration directory. If you have multiple | ||
+ | # MiniMyth systems with common configuration, then you can include this line | ||
+ | # in each 'minimyth.conf' file and put the common configuration in the file | ||
+ | # 'default/minimyth-common.conf'. | ||
+ | ################################################################################ | ||
+ | #mm_minimyth_conf_include minimyth-common.conf | ||
+ | ################################################################################ | ||
+ | # MiniMyth configuration variables. | ||
+ | # | ||
+ | # MM_MINIMYTH_UPDATE_URL | ||
+ | # MM_MINIMYTH_BOOT_URL | ||
+ | # MM_MINIMYTH_FETCH_MINIMYTH_PM | ||
+ | ################################################################################ | ||
+ | #MM_MINIMYTH_BOOT_URL='http://tftp.home/minimyth/' | ||
+ | ################################################################################ | ||
+ | # DHCP overrides configuration variables. | ||
+ | # | ||
+ | # MM_DHCP_ADDRESS | ||
+ | # MM_DHCP_BROADCAST | ||
+ | # MM_DHCP_SUBNET_MASK | ||
+ | # MM_DHCP_ROUTERS | ||
+ | # MM_DHCP_HOST_NAME | ||
+ | # MM_DHCP_DOMAIN_NAME | ||
+ | # MM_DHCP_DOMAIN_NAME_SERVERS | ||
+ | # MM_DHCP_NTP_SERVERS | ||
+ | # MM_DHCP_LOG_SERVERS | ||
+ | # MM_DHCP_TCODE | ||
+ | ################################################################################ | ||
+ | MM_DHCP_TCODE='Europe/London' | ||
+ | MM_DHCP_DOMAIN_NAME='mydomain.com' | ||
+ | ################################################################################ | ||
+ | # Security configuration variables. | ||
+ | # | ||
+ | # MM_SECURITY_ENABLED | ||
+ | # MM_SECURITY_USER_MINIMYTH_UID | ||
+ | # MM_SECURITY_USER_MINIMYTH_GID | ||
+ | # MM_SECURITY_FETCH_CREDENTIALS_CIFS | ||
+ | # MM_SECURITY_FETCH_CA_BUNDLE_CRT | ||
+ | ################################################################################ | ||
+ | #MM_SECURITY_ENABLED='yes' | ||
+ | #MM_SECURITY_FETCH_CREDENTIALS_CIFS='yes' | ||
+ | #MM_SECURITY_FETCH_CA_BUNDLE_CRT='yes' | ||
+ | ################################################################################ | ||
+ | # Firmware configuration variables. | ||
+ | # | ||
+ | # MM_FIRMWARE_FILE_LIST | ||
+ | ################################################################################ | ||
+ | ################################################################################ | ||
+ | # ACPI configuration variables. | ||
+ | # | ||
+ | # MM_ACPI_EVENT_BUTTON_POWER | ||
+ | # MM_ACPI_VIDEO_FLAGS | ||
+ | ################################################################################ | ||
+ | ################################################################################ | ||
+ | # CPU configuration variables. | ||
+ | # | ||
+ | # MM_CPU_FREQUENCY_GOVERNOR | ||
+ | # MM_CPU_FETCH_MICROCODE_DAT | ||
+ | ################################################################################ | ||
+ | #MM_CPU_FREQUENCY_GOVERNOR='userspace' | ||
+ | ################################################################################ | ||
+ | # Audio configuration variables. | ||
+ | # | ||
+ | # MM_AUDIO_TYPE | ||
+ | # MM_AUDIO_CARD_NUMBER | ||
+ | # MM_AUDIO_DEVICE_NUMBER | ||
+ | # MM_AUDIO_GAIN | ||
+ | # MM_AUDIO_FETCH_ASOUND_CONF | ||
+ | # MM_AUDIO_FETCH_ASOUND_STATE | ||
+ | ################################################################################ | ||
+ | #MM_AUDIO_TYPE='digital' | ||
+ | ################################################################################ | ||
+ | # Video configuration variables. | ||
+ | # | ||
+ | # MM_VIDEO_ASPECT_RATIO | ||
+ | # MM_VIDEO_DECODER | ||
+ | # MM_VIDEO_DEINTERLACER | ||
+ | # MM_VIDEO_FONT_SCALE | ||
+ | # MM_VIDEO_PLAYBACK_PROFILE | ||
+ | # MM_VIDEO_RESIZE_ENABLED | ||
+ | ################################################################################ | ||
+ | MM_VIDEO_ASPECT_RATIO='16:9' | ||
+ | MM_VIDEO_DEINTERLACER='auto' | ||
+ | MM_VIDEO_DECODER='xvmc-vld' | ||
+ | MM_VIDEO_PLAYBACK_PROFILE='epia' | ||
+ | ################################################################################ | ||
+ | # X configuration variables. | ||
+ | # | ||
+ | # MM_X_ENABLED | ||
+ | # MM_X_DRIVER | ||
+ | # MM_X_RESTART_ON_SLEEP_ENABLED | ||
+ | # MM_X_WM_ENABLED | ||
+ | # MM_X_VNC_ENABLED | ||
+ | # MM_X_SCREENSAVER | ||
+ | # MM_X_SCREENSAVER_TIMEOUT | ||
+ | # MM_X_SCREENSAVER_HACK | ||
+ | # MM_X_MYTH_PROGRAM | ||
+ | # MM_X_OUTPUT_HDMI | ||
+ | # MM_X_OUTPUT_DVI | ||
+ | # MM_X_OUTPUT_VGA | ||
+ | # MM_X_OUTPUT_TV | ||
+ | # MM_X_TV_TYPE | ||
+ | # MM_X_TV_OUTPUT | ||
+ | # MM_X_TV_OVERSCAN | ||
+ | # MM_X_SYNC | ||
+ | # MM_X_REFRESH | ||
+ | # MM_X_RESOLUTION | ||
+ | # MM_X_MODELINE | ||
+ | # MM_X_MODE | ||
+ | # MM_X_MODELINE_0 | ||
+ | # MM_X_MODELINE_1 | ||
+ | # MM_X_MODELINE_2 | ||
+ | # MM_X_MODE_0 | ||
+ | # MM_X_MODE_1 | ||
+ | # MM_X_MODE_2 | ||
+ | # MM_X_HACK_HIDE_BLUE_LINE_ENABLED | ||
+ | # MM_X_FETCH_XINITRC | ||
+ | # MM_X_FETCH_XMODMAPRC | ||
+ | # MM_X_FETCH_XORG_CONF | ||
+ | ################################################################################ | ||
+ | MM_X_DRIVER='openchome' | ||
+ | MM_X_MODE='848x480Over' | ||
+ | MM_X_VNC_ENABLED='yes' | ||
+ | MM_X_OUTPUT_VGA='auto' | ||
+ | MM_X_OUTPUT_TV='auto' | ||
+ | MM_X_TV_TYPE='PAL' | ||
+ | MM_X_TV_OUTPUT='Composite' | ||
+ | ################################################################################ | ||
+ | # Font configuration variables. | ||
+ | # | ||
+ | # MM_FONT_FILE_TTF_ADD | ||
+ | # MM_FONT_FILE_TTF_DELETE | ||
+ | ################################################################################ | ||
+ | ################################################################################ | ||
+ | # Myth master backend communication configuration variables. | ||
+ | # | ||
+ | # MM_MASTER_SERVER | ||
+ | # MM_MASTER_DBUSERNAME | ||
+ | # MM_MASTER_DBPASSWORD | ||
+ | # MM_MASTER_DBNAME | ||
+ | # MM_MASTER_WOL_ENABLED | ||
+ | # MM_MASTER_WOL_MAC | ||
+ | # MM_MASTER_WOLSQLRECONNECTWAITTIME | ||
+ | # MM_MASTER_WOLSQLCONNECTRETRY | ||
+ | # MM_MASTER_WOLSQLCOMMAND | ||
+ | # MM_MASTER_WOL_ADDITIONAL_DELAY | ||
+ | ################################################################################ | ||
+ | MM_MASTER_SERVER='192.168.1.90' | ||
+ | ################################################################################ | ||
+ | # Myth plugin configuration variables. | ||
+ | # | ||
+ | # MM_PLUGIN_INFORMATION_CENTER_ENABLED | ||
+ | # MM_PLUGIN_OPTICAL_DISK_ENABLED | ||
+ | # MM_PLUGIN_BROWSER_ENABLED | ||
+ | # MM_PLUGIN_DVD_ENABLED | ||
+ | # MM_PLUGIN_GALLERY_ENABLED | ||
+ | # MM_PLUGIN_GAME_ENABLED | ||
+ | # MM_PLUGIN_MUSIC_ENABLED | ||
+ | # MM_PLUGIN_NEWS_ENABLED | ||
+ | # MM_PLUGIN_PHONE_ENABLED | ||
+ | # MM_PLUGIN_STREAM_ENABLED | ||
+ | # MM_PLUGIN_VIDEO_ENABLED | ||
+ | # MM_PLUGIN_WEATHER_ENABLED | ||
+ | # MM_PLUGIN_ZONEMINDER_ENABLED | ||
+ | ################################################################################ | ||
+ | MM_PLUGIN_OPTICAL_DISK_ENABLED='yes' | ||
+ | MM_PLUGIN_BROWSER_ENABLED='no' | ||
+ | MM_PLUGIN_GALLERY_ENABLED='yes' | ||
+ | MM_PLUGIN_GAME_ENABLED='no' | ||
+ | MM_PLUGIN_MUSIC_ENABLED='no' | ||
+ | MM_PLUGIN_NEWS_ENABLED='yes' | ||
+ | MM_PLUGIN_PHONE_ENABLED='no' | ||
+ | MM_PLUGIN_STREAM_ENABLED='no' | ||
+ | MM_PLUGIN_VIDEO_ENABLED='yes' | ||
+ | MM_PLUGIN_WEATHER_ENABLED='yes' | ||
+ | MM_PLUGIN_ZONEMINDER_ENABLED='no' | ||
+ | ################################################################################ | ||
+ | # Extras directory configuration variables. | ||
+ | # | ||
+ | # MM_EXTRAS_URL | ||
+ | ################################################################################ | ||
+ | ################################################################################ | ||
+ | # CODECs directory configuration variables. | ||
+ | # | ||
+ | # MM_CODECS_URL | ||
+ | ################################################################################ | ||
+ | MM_CODECS_URL="auto" | ||
+ | ################################################################################ | ||
+ | # Adobe Flash Player configuration variables. | ||
+ | # | ||
+ | # MM_FLASH_URL | ||
+ | ################################################################################ | ||
+ | ################################################################################ | ||
+ | # Hulu Desktop configuration variables. | ||
+ | # | ||
+ | # MM_HULU_URL | ||
+ | # MM_HULU_REMOTE | ||
+ | # MM_HULU_STORE_HULUDESKTOP_DATA | ||
+ | ################################################################################ | ||
+ | ################################################################################ | ||
+ | # Theme configuration variables. | ||
+ | # | ||
+ | # MM_THEME_NAME | ||
+ | # MM_THEMEOSD_NAME | ||
+ | # MM_THEME_URL | ||
+ | # MM_THEMEOSD_URL | ||
+ | # MM_THEMECACHE_URL | ||
+ | # MM_THEME_FILE_MENU_ADD | ||
+ | ################################################################################ | ||
+ | #MM_THEMEOSD_NAME='Titivillus-OSD' | ||
+ | #MM_THEME_NAME='MythCenter-wide' | ||
+ | #MM_THEMEOSD_NAME='Retro-OSD' | ||
+ | MM_THEME_NAME='metallurgy' | ||
+ | #MM_THEME_NAME='Arclight' | ||
+ | #MM_THEME_NAME='metallurgy' | ||
+ | MM_THEMEOSD_NAME='BlackCurves-OSD' | ||
+ | MM_THEME_URL='auto' | ||
+ | MM_THEMEOSD_URL='auto' | ||
+ | MM_THEMECACHE_URL='auto' | ||
+ | ################################################################################ | ||
+ | # Remote media directory configuration variables. | ||
+ | # | ||
+ | # MM_MEDIA_TV_MOUNTPOINT | ||
+ | # MM_MEDIA_TV_URL | ||
+ | # MM_MEDIA_GALLERY_MOUNTPOINT | ||
+ | # MM_MEDIA_GALLERY_URL | ||
+ | # MM_MEDIA_GAME_MOUNTPOINT | ||
+ | # MM_MEDIA_GAME_URL | ||
+ | # MM_MEDIA_MUSIC_MOUNTPOINT | ||
+ | # MM_MEDIA_MUSIC_URL | ||
+ | # MM_MEDIA_VIDEO_MOUNTPOINT | ||
+ | # MM_MEDIA_VIDEO_URL | ||
+ | # MM_MEDIA_DVD_RIP_MOUNTPOINT | ||
+ | # MM_MEDIA_DVD_RIP_URL | ||
+ | # MM_MEDIA_GENERIC_LIST | ||
+ | ################################################################################ | ||
+ | #MM_MEDIA_GALLERY_URL="cifs://${MM_TFTP_SERVER}/pictures?credentials=/etc/cifs/credentials_cifs" | ||
+ | #MM_MEDIA_GAME_URL="cifs://${MM_TFTP_SERVER}/games?credentials=/etc/cifs/credentials_cifs" | ||
+ | #MM_MEDIA_MUSIC_URL="cifs://${MM_TFTP_SERVER}/music?credentials=/etc/cifs/credentials_cifs" | ||
+ | #MM_MEDIA_VIDEO_URL="cifs://${MM_TFTP_SERVER}/videos?credentials=/etc/cifs/credentials_cifs" | ||
+ | #MM_MEDIA_DVD_RIP_URL="nfs://${MM_TFTP_SERVER}/home/public/minimyth/themecache" | ||
+ | MM_MEDIA_GALLERY_URL="nfs://mythtv:mythtv@192.168.1.90/storage/pictures" | ||
+ | MM_MEDIA_VIDEO_URL="cifs://mythtv:mythtv@192.168.1.90/storage/videos" | ||
+ | MM_MEDIA_DVD_RIP_URL="cifs://mythtv:mythtv@192.168.1.90/storage/temp" | ||
+ | ################################################################################ | ||
+ | # Game configuration variables. | ||
+ | # | ||
+ | # MM_GAME_SAVE_ENABLED | ||
+ | # MM_GAME_SAVE_LIST | ||
+ | # MM_GAME_BIOS_ROOT | ||
+ | # MM_GAME_GAME_ROOT | ||
+ | ################################################################################ | ||
+ | ################################################################################ | ||
+ | # Bluetooth configuration variables. | ||
+ | # | ||
+ | # MM_BLUETOOTH_DEVICE_LIST | ||
+ | ################################################################################ | ||
+ | ################################################################################ | ||
+ | # Wii remote control configuration variables. | ||
+ | # | ||
+ | # MM_WIIMOTE_ADDRESS_0 | ||
+ | # MM_WIIMOTE_ADDRESS_1 | ||
+ | # MM_WIIMOTE_ADDRESS_2 | ||
+ | # MM_WIIMOTE_ADDRESS_3 | ||
+ | ################################################################################ | ||
+ | ################################################################################ | ||
+ | # LIRC configuration variables. | ||
+ | # | ||
+ | # MM_LIRC_AUTO_ENABLED | ||
+ | # MM_LIRC_DEVICE_BLACKLIST | ||
+ | # MM_LIRC_DRIVER | ||
+ | # MM_LIRC_DEVICE | ||
+ | # MM_LIRC_KERNEL_MODULE | ||
+ | # MM_LIRC_KERNEL_MODULE_OPTIONS | ||
+ | # MM_LIRC_IREXEC_ENABLED | ||
+ | # MM_LIRC_IRXEVENT_ENABLED | ||
+ | # MM_LIRC_IRXKEYS_ENABLED | ||
+ | # MM_LIRC_SLEEP_ENABLED | ||
+ | # MM_LIRC_WAKEUP_ENABLED | ||
+ | # MM_LIRC_FETCH_LIRCD_CONF | ||
+ | # MM_LIRC_FETCH_LIRCMD_CONF | ||
+ | # MM_LIRC_FETCH_LIRCRC | ||
+ | # MM_LIRC_FETCH_LIRCRC_MINIMYTH | ||
+ | # MM_LIRC_FETCH_LIRCRC_MYTHTV | ||
+ | # MM_LIRC_FETCH_LIRCRC_MPLAYER | ||
+ | # MM_LIRC_FETCH_LIRCRC_VLC | ||
+ | # MM_LIRC_FETCH_LIRCRC_XINE | ||
+ | ################################################################################ | ||
+ | MM_LIRC_DRIVER='lirc_serial' | ||
+ | #MM_LIRC_DEVICE='/dev/lirc0' | ||
+ | MM_LIRC_KERNEL_MODULE='lirc_serial' | ||
+ | MM_LIRC_KERNEL_MODULE_OPTIONS='irq=4 io=0x3f8' | ||
+ | MM_LIRC_FETCH_LIRCD_CONF='yes' | ||
+ | #MM_LIRC_FETCH_LIRCRC='yes' | ||
+ | MM_LIRC_FETCH_LIRCRC_MYTHTV='yes' | ||
+ | MM_LIRC_FETCH_LIRCRC_VLC='yes' | ||
+ | MM_LIRC_FETCH_LIRCRC_XINE='yes' | ||
+ | ################################################################################ | ||
+ | # LCDPROC configuration variables. | ||
+ | # | ||
+ | # MM_LCDPROC_DRIVER | ||
+ | # MM_LCDPROC_DEVICE | ||
+ | # MM_LCDPROC_KERNEL_MODULE | ||
+ | # MM_LCDPROC_KERNEL_MODULE_OPTIONS | ||
+ | # MM_LCDPROC_FETCH_LCDD_CONF | ||
+ | ################################################################################ | ||
+ | ################################################################################ | ||
+ | # External equipment control configuration variables. | ||
+ | # | ||
+ | # MM_EXTERNAL_POWER_OFF | ||
+ | # MM_EXTERNAL_POWER_ON | ||
+ | # MM_EXTERNAL_VOLUME_DOWN | ||
+ | # MM_EXTERNAL_VOLUME_UP | ||
+ | # MM_EXTERNAL_VOLUME_MUTE | ||
+ | # MM_EXTERNAL_AQUOS_ENABLED | ||
+ | # MM_EXTERNAL_AQUOS_DEVICE | ||
+ | # MM_EXTERNAL_AQUOS_PORT | ||
+ | # MM_EXTERNAL_AQUOS_POWER_ENABLED | ||
+ | # MM_EXTERNAL_AQUOS_VOLUME_ENABLED | ||
+ | # MM_EXTERNAL_AQUOS_INPUT | ||
+ | ################################################################################ | ||
+ | #MM_EXTERNAL_POWER_OFF=' | ||
+ | # /usr/bin/irsend <television> KEY_POWEROFF ; | ||
+ | # /usr/bin/irsend <receiver> KEY_POWEROFF' | ||
+ | #MM_EXTERNAL_POWER_ON=' | ||
+ | # /usr/bin/irsend <television> KEY_POWERON ; | ||
+ | # /usr/bin/irsend <receiver> KEY_POWERON' | ||
+ | #MM_EXTERNAL_VOLUME_DOWN=' | ||
+ | # /usr/bin/irsend <receiver> KEY_VOLUMEDOWN' | ||
+ | #MM_EXTERNAL_VOLUME_UP=' | ||
+ | # /usr/bin/irsend <receiver> KEY_VOLUMEUP' | ||
+ | #MM_EXTERNAL_VOLUME_MUTE=' | ||
+ | # /usr/bin/irsend <receiver> KEY_MUTE' | ||
+ | ################################################################################ | ||
+ | # SSH server configuration variables. | ||
+ | # | ||
+ | # MM_SSH_SERVER_ENABLED | ||
+ | ################################################################################ | ||
+ | #MM_SSH_SERVER_ENABLED='yes' | ||
+ | ################################################################################ | ||
+ | # Cron configuration variables. | ||
+ | # | ||
+ | # MM_CRON_FETCH_CRONTAB | ||
+ | ################################################################################ | ||
+ | ################################################################################ | ||
+ | # Slave backend configuration variables. | ||
+ | # | ||
+ | # MM_BACKEND_ENABLED | ||
+ | # MM_BACKEND_DEBUG_LEVEL | ||
+ | ################################################################################ | ||
+ | ################################################################################ | ||
+ | # MiniMyth direct Myth database configuration variables. | ||
+ | # | ||
+ | # MM_MYTHDB_JUMPPOINTS_{key} | ||
+ | # MM_MYTHDB_KEYBINDINGS_{key} | ||
+ | # MM_MYTHDB_SETTINGS_{key} | ||
+ | ################################################################################ | ||
+ | #MM_MYTHDB_JUMPPOINTS_MythGallery='MythGallery~Alt+G' | ||
+ | #MM_MYTHDB_JUMPPOINTS_Play_music='Play music~Alt+M' | ||
+ | #MM_MYTHDB_JUMPPOINTS_MythStream='MythStream~Alt+S' | ||
+ | #MM_MYTHDB_JUMPPOINTS_TV_Recording_Playback='TV Recording Playback~Alt+T' | ||
+ | #MM_MYTHDB_JUMPPOINTS_MythVideo='MythVideo~Alt+V' | ||
+ | #MM_MYTHDB_KEYBINDINGS_Music_FFWD='Music~FFWD~)' | ||
+ | #MM_MYTHDB_KEYBINDINGS_Music_RWND='Music~RWND~(' | ||
+ | #MM_MYTHDB_KEYBINDINGS_Stream_FULLSCREEN='Stream~FULLSCREEN~W' | ||
+ | #MM_MYTHDB_KEYBINDINGS_TV_Playback_SEEKFFWD='TV Playback~SEEKFFWD~),Right' | ||
+ | #MM_MYTHDB_KEYBINDINGS_TV_Playback_SEEKRWND='TV Playback~SEEKRWND~(,Left' | ||
+ | #MM_MYTHDB_SETTINGS_GalleryMoviePlayerCmd='GalleryMoviePlayerCmd~xine -pfhq --no-splash --loop=loop' | ||
+ | #MM_MYTHDB_SETTINGS_VCDPlayerCommand='VCDPlayerCommand~xine -pfhq --no-splash --loop=loop vcd://' | ||
+ | #MM_MYTHDB_SETTINGS_VideoDefaultPlayer='VideoDefaultPlayer~xine -pfhq --no-splash --loop=loop' |
Latest revision as of 16:58, 29 August 2010
Minimyth - PXE NetworkBoot Example
Minimyth is a light linux distribution for Mythfrontend. This is an example of a typical setup utilising the main features including network boot. The backend in this example is a Mythdora Box.
It loads the distro across the network into memory. There is no HDD or any other storage device.
For links and other guides try Minimyth
Example
Network Topology
+----------------------+ +-----------------------+ |MythTv Backend Server | |tv1 | |IP : 192.168.1.90 | +-----|192.168.1.91 | |Static IP | | |Runs : Minimyth | |Runs : MythBackend, |---+ |MAC : 00:40:63:EF:7E:D2| | dhcpd, | | +-----------------------+ | tftp, samba | | +-----------------------+ +----------------------+ +-----|tvConserv | |192.168.1.92 | |Runs : Minimyth | |MAC : 48:5B:39:95:16:B5| +-----------------------+
Get the MAC Address of your frontend
You will need to enter setup on the BIOS and disable usual boot methods (ie CDROM, HDD) etc and track down the setting to enable network boot.
One this is done, fire up your box and you will see it will show up its MAC address as it looks for a DHCP server.
It will fail as we have not got everything setup yet, but write down the MAC address as we are going to need it later. The MAC address is prefixed '01-', in some cases below the '01-' is needed, for DHCPD server strip off the '01-'
DHCPD Server
To install a dhcpd server on your backend
# yum install dhcpd
The create the config file /etc/dhcp/dhcpd.conf
#Basic dhcpd.conf # option definitions common to all supported networks... option domain-name "mydomain.com"; default-lease-time 600; get-lease-hostnames true; max-lease-time 7200; authoritative; log-facility local7; allow booting; allow bootp; option domain-name-servers 192.168.1.1, 158.152.1.58; option routers 192.168.1.1; option ntp-servers 0.fedora.pool.ntp.org, 1.fedora.pool.ntp.org, 2.fedora.pool.ntp.org; # leasable addresses subnet 192.168.1.0 netmask 255.255.255.0 { range 192.168.1.220 192.168.1.250; } host tv1 { hardware ethernet 00:40:63:EF:7E:D2; fixed-address 192.168.1.91; next-server 192.168.1.90; filename "PXEClient/pxelinux.0"; option host-name "tv1"; } host tvConserv { hardware ethernet 48:5B:39:95:16:B5; fixed-address 192.168.1.92; next-server 192.168.1.90; filename "PXEClient/pxelinux.0"; option host-name "tvConserv"; }
Enable the service
#chkconfig --levels 2345 dhcpd on
NOTE : The hostname is important as the directory structure will look for the config files per that hostname
tftp Server
To install tftp (Trivial File Transfer Protocol)
# yum install tftp-server
Tftp uses the Xinetd service (ie provides the service on demand) Most installs will automatically create the xinetd.d files, but we need to ammend them to provide write access to the server. (Ie the flags -c -v -s)
# default: off # description: The tftp server serves files using the trivial file transfer \ # protocol. The tftp protocol is often used to boot diskless \ # workstations, download configuration files to network-aware printers, \ # and to start the installation process for some operating systems. service tftp { disable = no socket_type = dgram protocol = udp wait = yes user = root server = /usr/sbin/in.tftpd server_args = -c -v -s /tftpboot per_source = 11 cps = 100 2 flags = IPv4 }
Samba Server for file access
In this example we need to access the backend file storage system. On the server in the example MythBackend folders are in the folder /storage.
To export this as a share in the samba server we need to add the following to the end of /etc/samba/smb.conf
[storage] comment = MythTV Data Storage path = /storage writable = yes create mask = 0660 force create mode = 0660 force directory mode = 777 directory mask = 0777
Ensure the samba server is set to start on boot
#chkconfig --levels 2345 smbd on
Note in the minimyth.conf file below, how this is accessed.
Directory Structure and Base Files
Create a directory structure as follows
#mkdir /tftpboot #mkdir /tftpboot/PXEClient #mkdir /tftpboot/PXEClient/conf/tv1 #mkdir /tftpboot/PXEClient/conf/tvConserv #mkdir /tftpboot/PXEClient/conf-rw #mkdir /tftpboot/PXEClient/pxelinux.cfg
You will then need to populate with some basic files (adjust downloads accordingly) Minimyth for i686 (Note VIA processors now are also i686 NOT c7)
#cd /tftpboot/PXEClient #wget http://www.minimyth.org/download/test/latest-0.23/ram-minimyth-0.23.1-73b12.tar.bz2 #tar -xjf ram-minimyth-0.23.1-73b12.tar.bz
PXELinux Loader
For all Distros
#cd /tftpboot/PXEClient #mkdir temp #cd temp #wget http://www.kernel.org/pub/linux/utils/boot/syslinux/syslinux-4.02.tar.gz #gunzip syslinux-4.02.tar.gz #tar -xvf syslinux-4.02.tar #cd syslinux-4.02/core/ #cp pxelinux.0 /tftpboot/PXEClient/ #cd /tftpboot/PXEClient #chmod +x pxelinux.0 #rm -rf temp
Some distros such as Fedora pxelinux.0 file is provided by syslinux.i386 installed via yum
#yum -y install syslinux.i386
yum will dump the file in /usr/lib/syslinux/pxelinux.0 so you will have to copy it to you tftpboot dir
#cp /usr/lib/syslinux/pxelinux.0 /tftpboot/PXEClient/
PXELinux Config Files
You can create a PXELinux loader for each MAC address, or a generic one called 'default' for all machines. Good if all your machines are same architecture and using same ram-minimyth file. In this example we will create one per MAC address even though they are the same.
#cd /tftpboot/PXEClient/pxelinux.cfg
Create a file 01-00-40-63-ef-7e-d2
DEFAULT minimyth-ram LABEL minimyth-ram KERNEL ram-minimyth-0.23.1-73b12/kernel APPEND ro root=/dev/ram0 ramdisk_size=96000 initrd=ram-minimyth-0.23.1-73b12/rootfs
And one called 01-48-5b-39-95-16-b5 (which in this case is the same contents)
DEFAULT minimyth-ram LABEL minimyth-ram KERNEL ram-minimyth-0.23.1-73b12/kernel APPEND ro root=/dev/ram0 ramdisk_size=96000 initrd=ram-minimyth-0.23.1-73b12/rootfs
The last things you need now are minimyth config files. These all go under the applicable /tftpboot/PXEClient/conf/frontend_hostname/
- minimyth.conf //Main Configuration file - lircd.conf //Lirc read file for the remote - lircrc.mythtv //How to translate that remote for Mythtv - lircrc.xine //How to translate that remote for Xine - lircrc.vlc etc etc
Example minimyth.conf below.
Permissions Cleanup
#chown -R nobody /tftpboot/PXEClient #chgrp -R nobody /tftpboot/PXEClient #chmod 777 /tftpboot/PXEClient/conf-rw
minimyth.conf
This is the "magical" part about Minimyth and its immense strength. You create a file called minimyth.conf that each frontend picks up and configures Myth to suit that machine. The magical part is, when you upgrade your minimyth for fixes, you do not have to re-setup like a standard box. The new minimyth will pull in the minimyth.conf, setup xorg, video profiles and so on.
Here is a typical minimyth.conf (for Openchrome Via CLE266 with TV out and homebrew LIRC receiver on Com Port 1)
################################################################################ # minimyth.conf # # The required MiniMyth configuration file. # # For information on this file, see either # <http://minimyth.org/document.shtml> # or # <http://{minimyth}/document.shtml>, # where '{minimyth}' is the IPv4 address or hostname of your MiniMyth system. ################################################################################ ################################################################################ # The following line will fetch and include a file named 'minimyth-common.conf' # from the MiniMyth read-only configuration directory. If you have multiple # MiniMyth systems with common configuration, then you can include this line # in each 'minimyth.conf' file and put the common configuration in the file # 'default/minimyth-common.conf'. ################################################################################ #mm_minimyth_conf_include minimyth-common.conf ################################################################################ # MiniMyth configuration variables. # # MM_MINIMYTH_UPDATE_URL # MM_MINIMYTH_BOOT_URL # MM_MINIMYTH_FETCH_MINIMYTH_PM ################################################################################ #MM_MINIMYTH_BOOT_URL='http://tftp.home/minimyth/' ################################################################################ # DHCP overrides configuration variables. # # MM_DHCP_ADDRESS # MM_DHCP_BROADCAST # MM_DHCP_SUBNET_MASK # MM_DHCP_ROUTERS # MM_DHCP_HOST_NAME # MM_DHCP_DOMAIN_NAME # MM_DHCP_DOMAIN_NAME_SERVERS # MM_DHCP_NTP_SERVERS # MM_DHCP_LOG_SERVERS # MM_DHCP_TCODE ################################################################################ MM_DHCP_TCODE='Europe/London' MM_DHCP_DOMAIN_NAME='mydomain.com' ################################################################################ # Security configuration variables. # # MM_SECURITY_ENABLED # MM_SECURITY_USER_MINIMYTH_UID # MM_SECURITY_USER_MINIMYTH_GID # MM_SECURITY_FETCH_CREDENTIALS_CIFS # MM_SECURITY_FETCH_CA_BUNDLE_CRT ################################################################################ #MM_SECURITY_ENABLED='yes' #MM_SECURITY_FETCH_CREDENTIALS_CIFS='yes' #MM_SECURITY_FETCH_CA_BUNDLE_CRT='yes' ################################################################################ # Firmware configuration variables. # # MM_FIRMWARE_FILE_LIST ################################################################################ ################################################################################ # ACPI configuration variables. # # MM_ACPI_EVENT_BUTTON_POWER # MM_ACPI_VIDEO_FLAGS ################################################################################ ################################################################################ # CPU configuration variables. # # MM_CPU_FREQUENCY_GOVERNOR # MM_CPU_FETCH_MICROCODE_DAT ################################################################################ #MM_CPU_FREQUENCY_GOVERNOR='userspace' ################################################################################ # Audio configuration variables. # # MM_AUDIO_TYPE # MM_AUDIO_CARD_NUMBER # MM_AUDIO_DEVICE_NUMBER # MM_AUDIO_GAIN # MM_AUDIO_FETCH_ASOUND_CONF # MM_AUDIO_FETCH_ASOUND_STATE ################################################################################ #MM_AUDIO_TYPE='digital' ################################################################################ # Video configuration variables. # # MM_VIDEO_ASPECT_RATIO # MM_VIDEO_DECODER # MM_VIDEO_DEINTERLACER # MM_VIDEO_FONT_SCALE # MM_VIDEO_PLAYBACK_PROFILE # MM_VIDEO_RESIZE_ENABLED ################################################################################ MM_VIDEO_ASPECT_RATIO='16:9' MM_VIDEO_DEINTERLACER='auto' MM_VIDEO_DECODER='xvmc-vld' MM_VIDEO_PLAYBACK_PROFILE='epia' ################################################################################ # X configuration variables. # # MM_X_ENABLED # MM_X_DRIVER # MM_X_RESTART_ON_SLEEP_ENABLED # MM_X_WM_ENABLED # MM_X_VNC_ENABLED # MM_X_SCREENSAVER # MM_X_SCREENSAVER_TIMEOUT # MM_X_SCREENSAVER_HACK # MM_X_MYTH_PROGRAM # MM_X_OUTPUT_HDMI # MM_X_OUTPUT_DVI # MM_X_OUTPUT_VGA # MM_X_OUTPUT_TV # MM_X_TV_TYPE # MM_X_TV_OUTPUT # MM_X_TV_OVERSCAN # MM_X_SYNC # MM_X_REFRESH # MM_X_RESOLUTION # MM_X_MODELINE # MM_X_MODE # MM_X_MODELINE_0 # MM_X_MODELINE_1 # MM_X_MODELINE_2 # MM_X_MODE_0 # MM_X_MODE_1 # MM_X_MODE_2 # MM_X_HACK_HIDE_BLUE_LINE_ENABLED # MM_X_FETCH_XINITRC # MM_X_FETCH_XMODMAPRC # MM_X_FETCH_XORG_CONF ################################################################################ MM_X_DRIVER='openchome' MM_X_MODE='848x480Over' MM_X_VNC_ENABLED='yes' MM_X_OUTPUT_VGA='auto' MM_X_OUTPUT_TV='auto' MM_X_TV_TYPE='PAL' MM_X_TV_OUTPUT='Composite' ################################################################################ # Font configuration variables. # # MM_FONT_FILE_TTF_ADD # MM_FONT_FILE_TTF_DELETE ################################################################################ ################################################################################ # Myth master backend communication configuration variables. # # MM_MASTER_SERVER # MM_MASTER_DBUSERNAME # MM_MASTER_DBPASSWORD # MM_MASTER_DBNAME # MM_MASTER_WOL_ENABLED # MM_MASTER_WOL_MAC # MM_MASTER_WOLSQLRECONNECTWAITTIME # MM_MASTER_WOLSQLCONNECTRETRY # MM_MASTER_WOLSQLCOMMAND # MM_MASTER_WOL_ADDITIONAL_DELAY ################################################################################ MM_MASTER_SERVER='192.168.1.90' ################################################################################ # Myth plugin configuration variables. # # MM_PLUGIN_INFORMATION_CENTER_ENABLED # MM_PLUGIN_OPTICAL_DISK_ENABLED # MM_PLUGIN_BROWSER_ENABLED # MM_PLUGIN_DVD_ENABLED # MM_PLUGIN_GALLERY_ENABLED # MM_PLUGIN_GAME_ENABLED # MM_PLUGIN_MUSIC_ENABLED # MM_PLUGIN_NEWS_ENABLED # MM_PLUGIN_PHONE_ENABLED # MM_PLUGIN_STREAM_ENABLED # MM_PLUGIN_VIDEO_ENABLED # MM_PLUGIN_WEATHER_ENABLED # MM_PLUGIN_ZONEMINDER_ENABLED ################################################################################ MM_PLUGIN_OPTICAL_DISK_ENABLED='yes' MM_PLUGIN_BROWSER_ENABLED='no' MM_PLUGIN_GALLERY_ENABLED='yes' MM_PLUGIN_GAME_ENABLED='no' MM_PLUGIN_MUSIC_ENABLED='no' MM_PLUGIN_NEWS_ENABLED='yes' MM_PLUGIN_PHONE_ENABLED='no' MM_PLUGIN_STREAM_ENABLED='no' MM_PLUGIN_VIDEO_ENABLED='yes' MM_PLUGIN_WEATHER_ENABLED='yes' MM_PLUGIN_ZONEMINDER_ENABLED='no' ################################################################################ # Extras directory configuration variables. # # MM_EXTRAS_URL ################################################################################ ################################################################################ # CODECs directory configuration variables. # # MM_CODECS_URL ################################################################################ MM_CODECS_URL="auto" ################################################################################ # Adobe Flash Player configuration variables. # # MM_FLASH_URL ################################################################################ ################################################################################ # Hulu Desktop configuration variables. # # MM_HULU_URL # MM_HULU_REMOTE # MM_HULU_STORE_HULUDESKTOP_DATA ################################################################################ ################################################################################ # Theme configuration variables. # # MM_THEME_NAME # MM_THEMEOSD_NAME # MM_THEME_URL # MM_THEMEOSD_URL # MM_THEMECACHE_URL # MM_THEME_FILE_MENU_ADD ################################################################################ #MM_THEMEOSD_NAME='Titivillus-OSD' #MM_THEME_NAME='MythCenter-wide' #MM_THEMEOSD_NAME='Retro-OSD' MM_THEME_NAME='metallurgy' #MM_THEME_NAME='Arclight' #MM_THEME_NAME='metallurgy' MM_THEMEOSD_NAME='BlackCurves-OSD' MM_THEME_URL='auto' MM_THEMEOSD_URL='auto' MM_THEMECACHE_URL='auto' ################################################################################ # Remote media directory configuration variables. # # MM_MEDIA_TV_MOUNTPOINT # MM_MEDIA_TV_URL # MM_MEDIA_GALLERY_MOUNTPOINT # MM_MEDIA_GALLERY_URL # MM_MEDIA_GAME_MOUNTPOINT # MM_MEDIA_GAME_URL # MM_MEDIA_MUSIC_MOUNTPOINT # MM_MEDIA_MUSIC_URL # MM_MEDIA_VIDEO_MOUNTPOINT # MM_MEDIA_VIDEO_URL # MM_MEDIA_DVD_RIP_MOUNTPOINT # MM_MEDIA_DVD_RIP_URL # MM_MEDIA_GENERIC_LIST ################################################################################ #MM_MEDIA_GALLERY_URL="cifs://${MM_TFTP_SERVER}/pictures?credentials=/etc/cifs/credentials_cifs" #MM_MEDIA_GAME_URL="cifs://${MM_TFTP_SERVER}/games?credentials=/etc/cifs/credentials_cifs" #MM_MEDIA_MUSIC_URL="cifs://${MM_TFTP_SERVER}/music?credentials=/etc/cifs/credentials_cifs" #MM_MEDIA_VIDEO_URL="cifs://${MM_TFTP_SERVER}/videos?credentials=/etc/cifs/credentials_cifs" #MM_MEDIA_DVD_RIP_URL="nfs://${MM_TFTP_SERVER}/home/public/minimyth/themecache" MM_MEDIA_GALLERY_URL="nfs://mythtv:mythtv@192.168.1.90/storage/pictures" MM_MEDIA_VIDEO_URL="cifs://mythtv:mythtv@192.168.1.90/storage/videos" MM_MEDIA_DVD_RIP_URL="cifs://mythtv:mythtv@192.168.1.90/storage/temp" ################################################################################ # Game configuration variables. # # MM_GAME_SAVE_ENABLED # MM_GAME_SAVE_LIST # MM_GAME_BIOS_ROOT # MM_GAME_GAME_ROOT ################################################################################ ################################################################################ # Bluetooth configuration variables. # # MM_BLUETOOTH_DEVICE_LIST ################################################################################ ################################################################################ # Wii remote control configuration variables. # # MM_WIIMOTE_ADDRESS_0 # MM_WIIMOTE_ADDRESS_1 # MM_WIIMOTE_ADDRESS_2 # MM_WIIMOTE_ADDRESS_3 ################################################################################ ################################################################################ # LIRC configuration variables. # # MM_LIRC_AUTO_ENABLED # MM_LIRC_DEVICE_BLACKLIST # MM_LIRC_DRIVER # MM_LIRC_DEVICE # MM_LIRC_KERNEL_MODULE # MM_LIRC_KERNEL_MODULE_OPTIONS # MM_LIRC_IREXEC_ENABLED # MM_LIRC_IRXEVENT_ENABLED # MM_LIRC_IRXKEYS_ENABLED # MM_LIRC_SLEEP_ENABLED # MM_LIRC_WAKEUP_ENABLED # MM_LIRC_FETCH_LIRCD_CONF # MM_LIRC_FETCH_LIRCMD_CONF # MM_LIRC_FETCH_LIRCRC # MM_LIRC_FETCH_LIRCRC_MINIMYTH # MM_LIRC_FETCH_LIRCRC_MYTHTV # MM_LIRC_FETCH_LIRCRC_MPLAYER # MM_LIRC_FETCH_LIRCRC_VLC # MM_LIRC_FETCH_LIRCRC_XINE ################################################################################ MM_LIRC_DRIVER='lirc_serial' #MM_LIRC_DEVICE='/dev/lirc0' MM_LIRC_KERNEL_MODULE='lirc_serial' MM_LIRC_KERNEL_MODULE_OPTIONS='irq=4 io=0x3f8' MM_LIRC_FETCH_LIRCD_CONF='yes' #MM_LIRC_FETCH_LIRCRC='yes' MM_LIRC_FETCH_LIRCRC_MYTHTV='yes' MM_LIRC_FETCH_LIRCRC_VLC='yes' MM_LIRC_FETCH_LIRCRC_XINE='yes' ################################################################################ # LCDPROC configuration variables. # # MM_LCDPROC_DRIVER # MM_LCDPROC_DEVICE # MM_LCDPROC_KERNEL_MODULE # MM_LCDPROC_KERNEL_MODULE_OPTIONS # MM_LCDPROC_FETCH_LCDD_CONF ################################################################################ ################################################################################ # External equipment control configuration variables. # # MM_EXTERNAL_POWER_OFF # MM_EXTERNAL_POWER_ON # MM_EXTERNAL_VOLUME_DOWN # MM_EXTERNAL_VOLUME_UP # MM_EXTERNAL_VOLUME_MUTE # MM_EXTERNAL_AQUOS_ENABLED # MM_EXTERNAL_AQUOS_DEVICE # MM_EXTERNAL_AQUOS_PORT # MM_EXTERNAL_AQUOS_POWER_ENABLED # MM_EXTERNAL_AQUOS_VOLUME_ENABLED # MM_EXTERNAL_AQUOS_INPUT ################################################################################ #MM_EXTERNAL_POWER_OFF=' # /usr/bin/irsend <television> KEY_POWEROFF ; # /usr/bin/irsend <receiver> KEY_POWEROFF' #MM_EXTERNAL_POWER_ON=' # /usr/bin/irsend <television> KEY_POWERON ; # /usr/bin/irsend <receiver> KEY_POWERON' #MM_EXTERNAL_VOLUME_DOWN=' # /usr/bin/irsend <receiver> KEY_VOLUMEDOWN' #MM_EXTERNAL_VOLUME_UP=' # /usr/bin/irsend <receiver> KEY_VOLUMEUP' #MM_EXTERNAL_VOLUME_MUTE=' # /usr/bin/irsend <receiver> KEY_MUTE' ################################################################################ # SSH server configuration variables. # # MM_SSH_SERVER_ENABLED ################################################################################ #MM_SSH_SERVER_ENABLED='yes' ################################################################################ # Cron configuration variables. # # MM_CRON_FETCH_CRONTAB ################################################################################ ################################################################################ # Slave backend configuration variables. # # MM_BACKEND_ENABLED # MM_BACKEND_DEBUG_LEVEL ################################################################################ ################################################################################ # MiniMyth direct Myth database configuration variables. # # MM_MYTHDB_JUMPPOINTS_{key} # MM_MYTHDB_KEYBINDINGS_{key} # MM_MYTHDB_SETTINGS_{key} ################################################################################ #MM_MYTHDB_JUMPPOINTS_MythGallery='MythGallery~Alt+G' #MM_MYTHDB_JUMPPOINTS_Play_music='Play music~Alt+M' #MM_MYTHDB_JUMPPOINTS_MythStream='MythStream~Alt+S' #MM_MYTHDB_JUMPPOINTS_TV_Recording_Playback='TV Recording Playback~Alt+T' #MM_MYTHDB_JUMPPOINTS_MythVideo='MythVideo~Alt+V' #MM_MYTHDB_KEYBINDINGS_Music_FFWD='Music~FFWD~)' #MM_MYTHDB_KEYBINDINGS_Music_RWND='Music~RWND~(' #MM_MYTHDB_KEYBINDINGS_Stream_FULLSCREEN='Stream~FULLSCREEN~W' #MM_MYTHDB_KEYBINDINGS_TV_Playback_SEEKFFWD='TV Playback~SEEKFFWD~),Right' #MM_MYTHDB_KEYBINDINGS_TV_Playback_SEEKRWND='TV Playback~SEEKRWND~(,Left' #MM_MYTHDB_SETTINGS_GalleryMoviePlayerCmd='GalleryMoviePlayerCmd~xine -pfhq --no-splash --loop=loop' #MM_MYTHDB_SETTINGS_VCDPlayerCommand='VCDPlayerCommand~xine -pfhq --no-splash --loop=loop vcd://' #MM_MYTHDB_SETTINGS_VideoDefaultPlayer='VideoDefaultPlayer~xine -pfhq --no-splash --loop=loop'