Difference between revisions of "MythWeb via MacPorts"

From MythTV Official Wiki
Jump to: navigation, search
(Adapt for pre-built installer)
m (Update paths to reflect current Apache locations, and split self-build instructions into their own section)
 
(18 intermediate revisions by 2 users not shown)
Line 2: Line 2:
  
  
This page assumes that you have used the pre-built installer to install a complete Myth system on an OS X machine and now want to serve [[MythWeb]] from the same machine.  Other configurations are possible but are left as an exercise for the reader!  See [[#Building MythWeb and supporting software yourself|Building MythWeb yourself]] if you are not using the pre-built installer.
+
This section assumes that you have used the pre-built MythTV 0.28.1 installer to install a complete Myth system on an OS X machine and now want to serve [[MythWeb]] from the same machine.  Other configurations are possible but are left as an exercise for the reader!  See [[#Building MythWeb and supporting software yourself|Building MythWeb yourself]] if you are not using the pre-built MythTV 0.28.1 installer.
 +
 
  
  
Line 8: Line 9:
  
 
Everything required to run MythWeb is installed by the pre-built installer and the necessary configuration and set-up steps are detailed in the following sections.
 
Everything required to run MythWeb is installed by the pre-built installer and the necessary configuration and set-up steps are detailed in the following sections.
 +
===Ensure copies exist of required files===
 +
 +
Enter each one of the following lines in turn in Terminal.app.  Any errors will report a message; successful completion just returns the command prompt.
 +
 +
sudo cp -np /opt/dvr/apache2/bin/envvars-std /opt/dvr/apache2/bin/envvars
 +
sudo cp -np /opt/dvr/apache2/conf/original/httpd.conf /opt/dvr/apache2/conf/httpd.conf
 +
sudo cp -np /opt/dvr/apache2/conf/original/extra/* /opt/dvr/apache2/conf/extra/
  
 
=== Configure Apache and PHP ===
 
=== Configure Apache and PHP ===
Line 19: Line 27:
  
 
  cd /opt/dvr/apache2/modules
 
  cd /opt/dvr/apache2/modules
  sudo /opt/dvr/apache2/bin/apxs -a -e -n "php5" libphp5.so
+
  sudo /opt/dvr/apache2/bin/apxs -a -e -n "php5" mod_php54.so
  
====Edit Apache's http.conf====
+
====Edit Apache's httpd.conf====
 
You will probably need to change the permissions on the http.conf file in order to edit the file:
 
You will probably need to change the permissions on the http.conf file in order to edit the file:
  
Line 39: Line 47:
 
  # Include PHP configurations
 
  # Include PHP configurations
 
  #
 
  #
  Include conf/extra/mod_php.conf
+
  Include etc/apache2/extra/mod_php54.conf
 
  #  
 
  #  
 
  # MythWeb config
 
  # MythWeb config
  Include htdocs/MythWeb/mythweb.conf
+
  Include www/apache2/html/MythWeb/mythweb.conf
  
 
If you have a lower-end machine running Apache/PHP/MythWeb, you may find that the default settings use memory pretty aggressively.  Since we're only likely to be accessing MythWeb from a small number of computers--and seldom simultaneously--I found adding the following configuration values to httpd.conf helpful:
 
If you have a lower-end machine running Apache/PHP/MythWeb, you may find that the default settings use memory pretty aggressively.  Since we're only likely to be accessing MythWeb from a small number of computers--and seldom simultaneously--I found adding the following configuration values to httpd.conf helpful:
Line 54: Line 62:
 
MaxClients 7
 
MaxClients 7
 
MaxRequestsPerChild 300</pre>
 
MaxRequestsPerChild 300</pre>
 +
  
 
based on http://emergent.urbanpug.com/?p=60
 
based on http://emergent.urbanpug.com/?p=60
 +
 +
Save your changes and close the httpd.conf file.
  
 
====Modify PHP configuration====
 
====Modify PHP configuration====
Line 61: Line 72:
 
In Terminal, enter:
 
In Terminal, enter:
  
  cd /opt/dvr/etc/php5
+
  cd /opt/dvr/etc/php54
 
  sudo cp php.ini-development php.ini
 
  sudo cp php.ini-development php.ini
  
Setup the MySQL default socket to use the MacPorts configuration (/opt/dvr/var/run/mysql5/mysqld.sock)
+
Setup the MariaDB 5.5 default socket to use the MacPorts configuration ('/opt/dvr/var/run/mariadb/mysqld.sock')
  
 
  $ sudo -i
 
  $ sudo -i
  # cd /opt/dvr/etc/php5
+
  # cd /opt/dvr/etc/php54
 
  # cp php.ini php.ini.bak
 
  # cp php.ini php.ini.bak
  # defSock=`/opt/dvr/bin/mysql_config5 --socket`
+
  # defSock=`/opt/dvr/lib/mariadb/bin/mysql_config --socket`
 
  # cat php.ini | sed \
 
  # cat php.ini | sed \
 
   -e "s#pdo_mysql\.default_socket.*#pdo_mysql\.default_socket=${defSock}#" \
 
   -e "s#pdo_mysql\.default_socket.*#pdo_mysql\.default_socket=${defSock}#" \
Line 78: Line 89:
 
  # exit # OR rm php.ini.bak && exit
 
  # exit # OR rm php.ini.bak && exit
  
Restart Apache so that your changes take effect
+
====Edit MythWeb.conf====
 +
You may need to tell MythWeb the database settings, so that it can establish a connection.
 +
 
 +
Using a text editor, update /opt/dvr/apache2/htdocs/MythWeb/mythweb.conf to find and uncomment these lines:
 +
 
 +
<pre>
 +
setenv db_server        "localhost"
 +
setenv db_name          "mythconverg"
 +
setenv db_login        "mythtv"
 +
setenv db_password      "mythtv"
 +
</pre>
 +
 
 +
You should also update these with the correct server name, database name, login name and password as required.
 +
 
 +
Save your changes.
 +
 
 +
===Start Web Server===
 +
Start the Apache2 web server (httpd) with our configuration:
 +
 
 +
sudo launchctl load -w /Library/LaunchDaemons/org.macports.apache2.plist
 +
 
 +
Should you ever wish to stop using MythWeb on this machine, enter the following:
  
  sudo port unload apache2; sudo port load apache2
+
  sudo launchctl unload /Library/LaunchDaemons/org.macports.apache2.plist
  
 
=== Configure MythWeb ===
 
=== Configure MythWeb ===
  
 
MythWeb works 'out of the box'.  To do: determine if any more configuration is necessary or desirable.
 
MythWeb works 'out of the box'.  To do: determine if any more configuration is necessary or desirable.
 
  
 
== Accessing MythWeb ==
 
== Accessing MythWeb ==
Line 93: Line 124:
  
 
== Building MythWeb and supporting software yourself ==
 
== Building MythWeb and supporting software yourself ==
If you have built your own MythTV software using MacPorts, you can also build and install MythWeb. You will also have to complete the configuration and set-up steps above.  Note that the pre-built software is installed under '/opt/dvr' while your version will be under '/opt/local'.  Adapt all the instructions above by replace '/opt/dvr' with '/opt/local'.
+
 
 +
If you have built your own MythTV software using MacPorts, you can also build and install MythWeb.
 +
 
 +
=== Self-build: Installing MythWeb ===
  
 
Choose the version of MythWeb that matches your installed version of Myth.  Use Terminal to run the following commands:
 
Choose the version of MythWeb that matches your installed version of Myth.  Use Terminal to run the following commands:
Line 102: Line 136:
 
| What happens
 
| What happens
 
|-
 
|-
| <pre>sudo port install mythweb.27</pre>or <pre>sudo port install mythweb.26</pre>or <pre>sudo port install mythweb.25</pre>
+
| <pre>sudo port install mythweb.28</pre>
 
| Download, build and install the MythWeb and supporting software.  The first time, it may require several minutes to download, build and install the MacPorts versions of Apache2 and PHP5.
 
| Download, build and install the MythWeb and supporting software.  The first time, it may require several minutes to download, build and install the MacPorts versions of Apache2 and PHP5.
 
|}
 
|}
  
 +
=== Self-build: Configure Apache and PHP ===
 +
 +
Based on: https://trac.macports.org/wiki/howto/MAMP
 +
 +
You must enter a series of commands in Terminal and modify a couple of configuration files with a text editor (such as TextEdit or TextWrangler).
 +
 +
====Self-build: Register PHP with Apache====
 +
In Terminal, enter:
 +
 +
cd /opt/local/lib/apache2/modules
 +
sudo /opt/local/bin/apxs -a -e -n "php5" mod_php54.so
 +
 +
====Self-build: Edit Apache's httpd.conf====
 +
You will probably need to change the permissions on the http.conf file in order to edit the file:
 +
 +
<pre>sudo chmod 666 /opt/local/etc/apache2/httpd.conf</pre>
 +
 +
Using a text editor, update /opt/local/etc/apache2/httpd.conf file to extend the "DirectoryIndex" directive to include additional "index" files. Search for:
 +
 +
<pre>DirectoryIndex index.html</pre>
 +
 +
and change it this way:
 +
 +
<pre>DirectoryIndex index.php index.html</pre>
 +
 +
Also, at the end of the httpd.conf file, add the following lines so that Apache includes the mod_php "AddType" configurations and MythWeb's configuration file:
 +
 +
#
 +
# Include PHP configurations
 +
#
 +
Include etc/apache2/extra/mod_php54.conf
 +
#
 +
# MythWeb config
 +
Include www/apache2/html/MythWeb/mythweb.conf
 +
 +
If you have a lower-end machine running Apache/PHP/MythWeb, you may find that the default settings use memory pretty aggressively.  Since we're only likely to be accessing MythWeb from a small number of computers--and seldom simultaneously--I found adding the following configuration values to httpd.conf helpful:
 +
 +
<pre>#
 +
# MythWeb optional - Ease Apache memory demands
 +
#
 +
StartServers 1
 +
MinSpareServers 1
 +
MaxSpareServers 4
 +
MaxClients 7
 +
MaxRequestsPerChild 300</pre>
 +
 +
You should also find and uncomment the following two lines:
 +
 +
<pre>LoadModule rewrite_module lib/apache2/modules/mod_rewrite.so</pre>
 +
 +
...and...
 +
 +
<pre>LoadModule deflate_module lib/apache2/modules/mod_deflate.so</pre>
 +
 +
based on http://emergent.urbanpug.com/?p=60
 +
 +
Save your changes and close the httpd.conf file.
 +
 +
====Self-build: Modify PHP configuration====
 +
 +
In Terminal, enter:
 +
 +
cd /opt/local/etc/php54
 +
sudo cp php.ini-development php.ini
 +
 +
Setup the MariaDB 5.5 default socket to use the MacPorts configuration ('/opt/local/var/run/mariadb/mysqld.sock')
 +
 +
$ sudo -i
 +
# cd /opt/local/etc/php54
 +
# cp php.ini php.ini.bak
 +
# defSock=`/opt/local/lib/mariadb/bin/mysql_config --socket`
 +
# cat php.ini | sed \
 +
  -e "s#pdo_mysql\.default_socket.*#pdo_mysql\.default_socket=${defSock}#" \
 +
  -e "s#mysql\.default_socket.*#mysql\.default_socket=${defSock}#" \
 +
  -e "s#mysqli\.default_socket.*#mysqli\.default_socket=${defSock}#" > tmp.ini
 +
# grep default_socket tmp.ini  # Check it!
 +
# mv tmp.ini php.ini
 +
# exit # OR rm php.ini.bak && exit
 +
 +
====Self-build: Edit MythWeb.conf====
 +
You may need to tell MythWeb the database settings, so that it can establish a connection.
 +
 +
Using a text editor, update /opt/local/www/apache2/html/MythWeb/mythweb.conf to find and uncomment these lines:
 +
 +
<pre>
 +
setenv db_server        "localhost"
 +
setenv db_name          "mythconverg"
 +
setenv db_login        "mythtv"
 +
setenv db_password      "mythtv"
 +
</pre>
 +
 +
You should also update these with the correct server name, database name, login name and password as required.
 +
 +
Save your changes.
 +
 +
===Self-build: Start Web Server===
 +
Start the Apache2 web server (httpd) with our configuration:
 +
 +
sudo launchctl load -w /Library/LaunchDaemons/org.macports.apache2.plist
  
 +
Should you ever wish to stop using MythWeb on this machine, enter the following:
 +
 +
sudo launchctl unload /Library/LaunchDaemons/org.macports.apache2.plist
 +
 +
=== Self-build: Configure MythWeb ===
 +
 +
MythWeb works 'out of the box'.  To do: determine if any more configuration is necessary or desirable.
 +
 +
== Self-build: Accessing MythWeb ==
 +
 +
http://localhost/MythWeb or http://web.server.ip/MythWeb
  
 
== Troubleshooting ==
 
== Troubleshooting ==

Latest revision as of 11:30, 25 November 2018

Warning.png
Running a web server may open your computer up to hacking attempts, particularly if you allow access through your firewall. Instructions for securing MythWeb are available elsewhere in this wiki and you should take appropriate steps before enabling access via the Internet.


This section assumes that you have used the pre-built MythTV 0.28.1 installer to install a complete Myth system on an OS X machine and now want to serve MythWeb from the same machine. Other configurations are possible but are left as an exercise for the reader! See Building MythWeb yourself if you are not using the pre-built MythTV 0.28.1 installer.


Installation

Everything required to run MythWeb is installed by the pre-built installer and the necessary configuration and set-up steps are detailed in the following sections.

Ensure copies exist of required files

Enter each one of the following lines in turn in Terminal.app. Any errors will report a message; successful completion just returns the command prompt.

sudo cp -np /opt/dvr/apache2/bin/envvars-std /opt/dvr/apache2/bin/envvars
sudo cp -np /opt/dvr/apache2/conf/original/httpd.conf /opt/dvr/apache2/conf/httpd.conf
sudo cp -np /opt/dvr/apache2/conf/original/extra/* /opt/dvr/apache2/conf/extra/

Configure Apache and PHP

Based on: https://trac.macports.org/wiki/howto/MAMP

You must enter a series of commands in Terminal and modify a couple of configuration files with a text editor (such as TextEdit or TextWrangler).

Register PHP with Apache

In Terminal, enter:

cd /opt/dvr/apache2/modules
sudo /opt/dvr/apache2/bin/apxs -a -e -n "php5" mod_php54.so

Edit Apache's httpd.conf

You will probably need to change the permissions on the http.conf file in order to edit the file:

sudo chmod 666 /opt/dvr/apache2/conf/httpd.conf

Using a text editor, update /opt/dvr/apache2/conf/httpd.conf file to extend the "DirectoryIndex" directive to include additional "index" files. Search for:

DirectoryIndex index.html

and change it this way:

DirectoryIndex index.php index.html

Also, at the end of the httpd.conf file, add the following lines so that Apache includes the mod_php "AddType" configurations and MythWeb's configuration file:

# 
# Include PHP configurations
#
Include etc/apache2/extra/mod_php54.conf
# 
# MythWeb config
Include www/apache2/html/MythWeb/mythweb.conf

If you have a lower-end machine running Apache/PHP/MythWeb, you may find that the default settings use memory pretty aggressively. Since we're only likely to be accessing MythWeb from a small number of computers--and seldom simultaneously--I found adding the following configuration values to httpd.conf helpful:

#
# MythWeb optional - Ease Apache memory demands 
#
StartServers 1
MinSpareServers 1
MaxSpareServers 4
MaxClients 7
MaxRequestsPerChild 300


based on http://emergent.urbanpug.com/?p=60

Save your changes and close the httpd.conf file.

Modify PHP configuration

In Terminal, enter:

cd /opt/dvr/etc/php54
sudo cp php.ini-development php.ini

Setup the MariaDB 5.5 default socket to use the MacPorts configuration ('/opt/dvr/var/run/mariadb/mysqld.sock')

$ sudo -i
# cd /opt/dvr/etc/php54
# cp php.ini php.ini.bak
# defSock=`/opt/dvr/lib/mariadb/bin/mysql_config --socket`
# cat php.ini | sed \
  -e "s#pdo_mysql\.default_socket.*#pdo_mysql\.default_socket=${defSock}#" \
  -e "s#mysql\.default_socket.*#mysql\.default_socket=${defSock}#" \
  -e "s#mysqli\.default_socket.*#mysqli\.default_socket=${defSock}#" > tmp.ini
# grep default_socket tmp.ini  # Check it!
# mv tmp.ini php.ini
# exit # OR rm php.ini.bak && exit

Edit MythWeb.conf

You may need to tell MythWeb the database settings, so that it can establish a connection.

Using a text editor, update /opt/dvr/apache2/htdocs/MythWeb/mythweb.conf to find and uncomment these lines:

setenv db_server        "localhost"
setenv db_name          "mythconverg"
setenv db_login         "mythtv"
setenv db_password      "mythtv"

You should also update these with the correct server name, database name, login name and password as required.

Save your changes.

Start Web Server

Start the Apache2 web server (httpd) with our configuration:

sudo launchctl load -w /Library/LaunchDaemons/org.macports.apache2.plist

Should you ever wish to stop using MythWeb on this machine, enter the following:

sudo launchctl unload /Library/LaunchDaemons/org.macports.apache2.plist

Configure MythWeb

MythWeb works 'out of the box'. To do: determine if any more configuration is necessary or desirable.

Accessing MythWeb

http://localhost/MythWeb or http://web.server.ip/MythWeb


Building MythWeb and supporting software yourself

If you have built your own MythTV software using MacPorts, you can also build and install MythWeb.

Self-build: Installing MythWeb

Choose the version of MythWeb that matches your installed version of Myth. Use Terminal to run the following commands:

At the Terminal prompt, you enter What happens
sudo port install mythweb.28
Download, build and install the MythWeb and supporting software. The first time, it may require several minutes to download, build and install the MacPorts versions of Apache2 and PHP5.

Self-build: Configure Apache and PHP

Based on: https://trac.macports.org/wiki/howto/MAMP

You must enter a series of commands in Terminal and modify a couple of configuration files with a text editor (such as TextEdit or TextWrangler).

Self-build: Register PHP with Apache

In Terminal, enter:

cd /opt/local/lib/apache2/modules
sudo /opt/local/bin/apxs -a -e -n "php5" mod_php54.so

Self-build: Edit Apache's httpd.conf

You will probably need to change the permissions on the http.conf file in order to edit the file:

sudo chmod 666 /opt/local/etc/apache2/httpd.conf

Using a text editor, update /opt/local/etc/apache2/httpd.conf file to extend the "DirectoryIndex" directive to include additional "index" files. Search for:

DirectoryIndex index.html

and change it this way:

DirectoryIndex index.php index.html

Also, at the end of the httpd.conf file, add the following lines so that Apache includes the mod_php "AddType" configurations and MythWeb's configuration file:

# 
# Include PHP configurations
#
Include etc/apache2/extra/mod_php54.conf
# 
# MythWeb config
Include www/apache2/html/MythWeb/mythweb.conf

If you have a lower-end machine running Apache/PHP/MythWeb, you may find that the default settings use memory pretty aggressively. Since we're only likely to be accessing MythWeb from a small number of computers--and seldom simultaneously--I found adding the following configuration values to httpd.conf helpful:

#
# MythWeb optional - Ease Apache memory demands 
#
StartServers 1
MinSpareServers 1
MaxSpareServers 4
MaxClients 7
MaxRequestsPerChild 300

You should also find and uncomment the following two lines:

LoadModule rewrite_module lib/apache2/modules/mod_rewrite.so

...and...

LoadModule deflate_module lib/apache2/modules/mod_deflate.so

based on http://emergent.urbanpug.com/?p=60

Save your changes and close the httpd.conf file.

Self-build: Modify PHP configuration

In Terminal, enter:

cd /opt/local/etc/php54
sudo cp php.ini-development php.ini

Setup the MariaDB 5.5 default socket to use the MacPorts configuration ('/opt/local/var/run/mariadb/mysqld.sock')

$ sudo -i
# cd /opt/local/etc/php54
# cp php.ini php.ini.bak
# defSock=`/opt/local/lib/mariadb/bin/mysql_config --socket`
# cat php.ini | sed \
  -e "s#pdo_mysql\.default_socket.*#pdo_mysql\.default_socket=${defSock}#" \
  -e "s#mysql\.default_socket.*#mysql\.default_socket=${defSock}#" \
  -e "s#mysqli\.default_socket.*#mysqli\.default_socket=${defSock}#" > tmp.ini
# grep default_socket tmp.ini  # Check it!
# mv tmp.ini php.ini
# exit # OR rm php.ini.bak && exit

Self-build: Edit MythWeb.conf

You may need to tell MythWeb the database settings, so that it can establish a connection.

Using a text editor, update /opt/local/www/apache2/html/MythWeb/mythweb.conf to find and uncomment these lines:

setenv db_server        "localhost"
setenv db_name          "mythconverg"
setenv db_login         "mythtv"
setenv db_password      "mythtv"

You should also update these with the correct server name, database name, login name and password as required.

Save your changes.

Self-build: Start Web Server

Start the Apache2 web server (httpd) with our configuration:

sudo launchctl load -w /Library/LaunchDaemons/org.macports.apache2.plist

Should you ever wish to stop using MythWeb on this machine, enter the following:

sudo launchctl unload /Library/LaunchDaemons/org.macports.apache2.plist

Self-build: Configure MythWeb

MythWeb works 'out of the box'. To do: determine if any more configuration is necessary or desirable.

Self-build: Accessing MythWeb

http://localhost/MythWeb or http://web.server.ip/MythWeb

Troubleshooting

404 Not Found

Check Console.app, under the /var/log section for an apache2 error log. If you see lines like "File does not exist: /Library/WebServer/Documents/MythWeb", the Apache software built into OS X is intercepting the web request and isn't configured to handle it. Be sure that MacPorts Apache2 is the only one running; not the version built into OS X. Prior to Mountain Lion, go into the System Preferences>Sharing and ensure Web Sharing is not clicked. For Mountain Lion (OS X 10.8.x), search the web for instructions on enabling/disabling web sharing.