From MythTV Official Wiki
Revision as of 17:28, 21 May 2012 by Sphery (talk | contribs) (invalid value in the "mythfilldatabase Log Path" no longer applies; INSERT IGNORE INTO SQL Errors is wrong/outdated; 2006 LinkSys or Fedora Core is way out of date)

Jump to: navigation, search

Clean.png Cleanup: This article or section may require cleanup. Discuss the issue on the talk page

Important.png Note: The correct title of this article is mythfilldatabase. It appears incorrectly here due to technical restrictions.

mythfilldatabase fills the Myth database program table with upcoming shows.

Automatic use of mythfilldatabase

Normally mythfilldatabase is run automatically by mythbackend every 24 hours. For most people allowing mythfilldatabase to run automatically will be sufficient, however in areas with no XMLTV grabber or an unusual channel setup it may be run manually.

Manual use of mythfilldatabase

To run an extra time out of sequence (for example, because your subscription had run out, and you just renewed it), use no command line options:


Command line options


Run in manual channel configuration mode. This will ask you questions about every channel.


For running non-destructive updates on the database for users in xmltv zones that do not provide channel data. For example, to update two datasources with a single xmltv file, use:
      mythfilldatabase --update --file 1 tvguide.xml
      mythfilldatabase --update --file 2 tvguide.xml

See below for help about --file.


Use it in case that you want to assign a preset number for each channel, useful for non US countries where people are used to assigning a sequenced number for each channel, i.e.: 1->TVE1(S41), 2->La 2(SE18), 3->TV3(21), 4->Canal 33(60)...

--file <sourceid> <xmlfile>

Bypass the grabbers and read data directly from a file. <sourceid> = number for the video source to use with this file. <xmlfile> = file to read.

--dd-file <sourceid> <offset> <lineupid> <xmlfile>

<sourceid> = see --file
<offset> = see --file
<lineupid> = the lineup id
<xmlfile> = see --file

--xawchannels <sourceid> <xawtvrcfile>

(--manual flag works in combination with this). Read channels as defined in xawtvrc file given <sourceid> = cardinput, <xawtvrcfile> = file to read


When using DataDirect, ask mythfilldatabase to overwrite channel names, frequencies, etc. with the values available from the data source. This will override custom channel names, which is why it is off by default. This may manage to fix a corrupted channel lineup. You will also likely need to use this switch if your cable company does a channel realignment, once your program listings source catches up.


When using DataDirect, ask mythfilldatabase to remove new channels (those not in the database) from the DataDirect lineup. These channels are removed from the lineup as if you had done so via the DataDirect website's Lineup Wizard, but may be re-added manually and incorporated into MythTV by running mythfilldatabase without this option. New channels are automatically removed for DVB and HDTV sources that use DataDirect.


Normally MythTV tries to avoid adding ATSC channels to NTSC channel lineups. This option restores the behaviour of adding every channel in the downloaded channel lineup to MythTV's lineup, in case MythTV's smarts fail you.

--graboptions <"options">

Pass options to grabber.

--sourceid <number>

Only refresh data for sourceid given.

--max-days <number>

Force the maximum number of days, counting today, for the grabber to check for future listings.


Get as little listings data as possible to update channels.


      Each instance of the --refresh option takes one input, and the option can be specified 
      multiple times.  The three named options can be pre-pended by the 'not' parameter, 
      specifying that day should not be pulled.  Numbered days start with today at zero, 
      counting up, and a range can be specified using a dash.
      The following example will refresh today, skip tomorrow, and refresh all of next week:
      mythfilldatabase --refresh today --refresh nottomorrow --refresh 7-13


superseded by --refresh as of 0.25, old options will continue to function for now, but will be hidden from the help printout.


superseded by --refresh as of 0.25, old options will continue to function for now, but will be hidden from the help printout.


superseded by --refresh as of 0.25, old options will continue to function for now, but will be hidden from the help printout.
(Only valid for grabbers: DataDirect, se_swedb, no, ee, de_tvtoday). Force a refresh today or two days (or every day) from now, to catch the latest changes. These may be used to attempt to fix corrupted program guide data.


superseded by --refresh as of 0.25, old options will continue to function for now, but will be hidden from the help printout.
Tomorrow will always be refreshed unless this argument is used.


"To be announced" programs will always be refreshed unless this argument is used.

--export-icon-map [<filename>]

Exports your current icon map to <filename> (default: iconmap.xml).

--import-icon-map [<filename>]

Imports an icon map from <filename> (default: iconmap.xml).


Updates icon map icons only.

--reset-icon-map [all]

Resets your icon map (pass all to reset channel icons as well).


Marks any programs with a OriginalAirDate earlier than their start date as a repeat.

-v or --verbose debug-level

Use '-v help' for level info.


This text.

--manual and --update can not be used together.

External XMLTV

If you are in a country where mythfilldatabase will not work the normal way you will need to use the --file flag (e.g. XMLTV does not have a grabber included, or the grabber options are not fully supported by MythTV).

1. Obtain xml file of tv guide

Here in Belgium, I use pytvgrab to get my tv guide and output to an xml file:

$ tv_grab_be_tvb --configure  (you only need this the first time)
$ tv_grab_be_tvb -o belgium.xml

2. Find out the source id of your card

This is normally '1' if you have only one input card, but it is best to check it out because I have found if I have run mythtv setup more than once it can end up being something other than 1. To check, you need to look at the database:

$ mysql -u root mythconverg
mysql> select * from cardinput\G

Remember the source id

3. Run mythfilldatabase with the --file flag

The --file argument allows to directly import xmltv files. This is useful if you are using programs like nxtvepg to grab your EPG data.

Prior 0.21:

The offset argument the defines the number of days from today on to be updated. "-1" will refresh all. In this example "belgium.xml" is the file name for the output of the grabber:

$ mythfilldatabase --file <sourceid> offset belgium.xml

From 0.21 on:

From version 0.21 on the arguments of this command changed. The offset argument has been removed and the command changed to:

$ mythfilldatabase --file <sourceid> belgium.xml

From 0.25 on:

From version 0.25, the arguments of this command changed:

$ mythfilldatabase --file --sourceid <sourceid> --xmlfile belgium.xml

The first time you will need to use the --manual flag, but this is better explained on the XmlTv page.


mythfilldatabase causes the system to hang

This is probably an I/O saturation issue. mythfilldatabase and MySQL can cause hard disk or ATA bus saturation, causing Mythbackend to starve. Read more about Troubleshooting:Mythfilldatabase_IO_bottleneck.