Difference between revisions of "Mythwelcome"

From MythTV Official Wiki
Jump to: navigation, search
m (Categorized)
m (Categorized)
Line 326: Line 326:

Revision as of 14:11, 24 April 2006

A new addition in 0.19. This utility program displays a myth themed dialog which shows a welcome/status information screen that is designed to be shown whenever the frontend is not running.

The mythWelcome Screen

This has been introduced for those people that want to use scheduled wakeup and shutdown to record scheduled shows to save on power consumption. Prior to this the Frontend would always start up which in turn meant that the backend would never shutdown when the recording had finished thus defeating the whole purpose.

The Welcome screen will show the status of the backend and wait for you to manually start the frontend with your remote



If you're in a desperate hurry:
 	Run mythwelcome --setup and edit the settings to suit your setup.
 	Change your system startup to run mythwelcome instead of mythfrontend.
 	Change the Shutdown/Wakeup Options in mythtv-setup to call the mythshutdown
	And if you start wondering why it doesn't work, come back and read the
 	rest of the file. 8)
 	MythWelcome is a Myth themed application that shows a welcome/status
 	information screen that will be shown whenever the frontend is not
 	running ie. when an automatic startup has occurred to record a program.
	It shows some information about what the backend is currently doing
	(idle, recording, commercial flagging, transcoding or locked by a user etc.).
	It also shows what the backend is recording, what the next scheduled recording
 	is and shows a warning if there are any schedule conflicts. There is also a
 	push button to start the frontend.
	It is useful if you want to setup a dedicated MythTV system that you
 	don't want to run 24/7 but you want to automatically wake up to record
 	just like a normal video recorder and shutdown again when it is idle.
 	Mythwelcome will also prevent the backend from shutting down the system
 	if it is busy commercial flagging, downloading EPG data, transcoding or
 	shutdown has been locked by a user.
 	You should have already installed and have a working nvram-wakeup
 	setup including modifying your bootloader menu to add a Poweroff
 	menu option if your bios requires a reboot when setting the wakeup
 	time in the bios.
 	Mythwelcome/Mythshutdown Settings
	Like most of MythTV Mythwelcome and Mythshutdown store their settings
 	in the myth database. All of the settings are settable from the GUI.
 	There are two separate settings pages. One is shown by starting
	mythwelcome with the -s/--setup parameter or by pressing the
	'SHOWSETTINGS' key (defaults to F11 key) in Mythwelcome. You will probably only ever
	set these options once when you first setup Mythwelcome.
	nvram-wakeup command -  command to set wakeup time in bios
	                        if you are really lucky nvram-wakeup will be able
	                        to recognise your M/B automatically
	                        if you need to explicitly set the info-writer use
	                        something like this
	                        "/usr/sbin/nvram-wakeup -A -I aopen_ax37"
 	                        if you need to use a custom config file use something
 	                        like this
 	                        "/usr/sbin/nvram-wakeup -A -C /etc/nvram-wakeup.conf"
 	nvram-wakeup restart  - command to set which bootloader menu option to use
 	command                 after next reboot. This command is run if your bios
 	                        requires you to reboot to allow nvram-wakeup settings
 	                        to take effect.
 	                        older versions of grub require something like this
 	                        "echo 'savedefault --default=1 --once quit' | /sbin/grub"
                                (Note use: \' for the single quotes when entering the command else it wont save)
 	                        newer versions of grub can use something like this
 	                        "grub-set-default 1"
 	                        lilo users should use something like this
 	                        "lilo -R PowerOff"       
 	Poweroff Command      - The command mythshutdown should use to poweroff the computer.
 	Reboot Command        - The command mythshutdown should use to reboot the computer.
 	                        Used when your BIOS requires a reboot to allow nvram-wakeup
 	                        settings to take effect.
 	Start XTerm Command   - This is the command to use to open an XTerm window.
 	                        Leave blank to disable this feature.
 	                        Tip: If the default font size is too small to see on your
 	                        TV change the default setting to:
 	                        'xterm -fa Courier -fs 14' to change the font style and size.   
 	Start Frontend Command - This is the command mythwelcome should use to start the FE. It
 	                         is usefull if you want to change the verbose level or add a log
 	                         file to output message etc.
 	The second set of settings are available by pressing 'i/INFO' key in mythwelcome and allows you
 	to setup the daily wakeup/shutdown periods and control whether to automatically
	start the mythfrontend when mythwelcome is started and it is determined that it
	was started manually.
	Period 1 Start Time  - These setting determine a period of time that the master backend
	Period 1 End Time      should always wake up for. Set both times to 00:00 to
	                       disable this feature.
	Period 2 Start Time  - Second wakeup/shutdown period settings.                   
 	Period 2 End Time   
 	Automatically Start  - Normally when mythwelcome starts up it checks to see whether
	Mythfrontend           the system was started to record something or because of a
	                       wakeup/shutdown period. If not it will automatically start the
	                       frontend. You can disable this feature by unchecking this option.   
	Shutdown with Master - (Frontend only machines). If set mythwelcome will shutdown this system
	Backend                when the master backend shutsdown.
 	The mythbackend needs to co-operate with mythwelcome to work
 	as intended. It does this by calling the helper program 'mythshutdown'
 	to check whether it is safe to shutdown, to set the time to wake up
	for the next scheduled recording and to do the actual shutdown.
	You should run mythtv-setup and on the Shutdown/Wakeup Options page set
	the following settings: 
	    Block shutdown before
	    client connected:           should be checked
	    Idletimeout (secs):         any value greater that 0
	    Wakeup time format:         yyyy-MM-ddThh:mm
	    Set wakeup time command:    mythshutdown --setwakeup $time
	    Server Halt command:        mythshutdown --shutdown
	    Pre shutdown check command: mythshutdown --check 
	Because 'mythshutdown --shutdown' needs to run grub/lilo, reboot, poweroff
	and nvram-wakeup all of which require root privileges if you don't run the mythbackend
	as root you will have to use sudo to give mythshutdown root privileges and change the
	Server Halt command to 'sudo  mythshutdown --shutdown'.
	You will have to restart the backend for the new settings to take effect.
	If your motherboard/bios requires a reboot after changing the startup time
	in the bios with nvram-wakeup you should configure grub/lilo with a special
	menu boot option to reboot and immediately shutdown.
	Grub Users Only
	Simply add the following menu boot option to your grub.conf file:
	        savedefault 0
 	You should change the '0' to the menu item number you want to boot
 	normally by default. Also add 'default saved' towards the top of the file.
	set the nvram-wakeup restart command to '/sbin/grub-set-default 1'
 	the 1 should be the menu item number of the PowerOff menu item you added
 	above starting from 0.
	Lilo Users Only
 	As part of nvram-wakeup you can download some kernel images
 	that do nothing but shutdown the system. (see
	Add a boot option to the lilo.conf file such as:
	change the nvram-wakeup restart command to 'lilo -R PowerOff'   
	See the nvram-wakeup documentation for more info on how to setup lilo.
	The mythshutdown command line utility is a multi-purpose helper program used by
	both mythbackend and mythwelcome. The program needs to be configured to
	work properly by editing the settings in the GUI. (See 'Mythwelcome/Mythshutdown
	Settings' above).
	The program can be run with the following parameters:
	    this will prevent mythbackend from shutting down the system even if
	    it is idle. It is useful if you want to do some maintenance on the system
	    and don't want the backend to shutdown the computer.
	    allows the backend to shutdown when idle
	    returns 0 safe to shutdown or 1 not safe to shutdown
	    this is usually called by the backend as the 'Pre-Shutdown Check command'.
	    will return 1 if shutdown is locked, mythcommflag is running, mythtranscode
	    is running, mythfilldatabase is running or we are in or about to start a
	    daily wakeup/shutdown period.
	-w/--setwakeup "yyyy-MM-ddThh:mm"
	    sets the time the next scheduled recording is to start. Does not set the
	    time in the bios. Usually called by the backend's 'Set wakeup time command'.
	    does all the hard work of determining when the next wakeup should be.
	    calls nvram-wakeup to set the time in the bios and calls grub/lilo to reboot
	    the system if required. Usually called by the backend's 'Server Halt
	    command'. You probably need to run this with root privileges.
	    returns a value indicating what programs are running that will prevent
	    the backend from shutting down. The value is an OR'd flag of the following
	    0 - Idle                - free to shutdown
 	    1 - Transcoding         - mythtranscode is running
 	    2 - Commercial Flagging - mythcommflag is running
 	    4 - Grabbing EPG data   - mythfilldatabase is running
 	    8 - not currently used
 	   16 - Locked              - shutdown has been locked by a user   
 	   32 - not currently used  - 
 	   64 - In wakeup period    - In a daily wakeup/shutdown period
 	  128 - About to start wake - Less than 15 minutes to next wakeup period
 	        up period
 	    used by mythwelcome to display a status message to the user and
 	    by 'mythshutdown --check' itself to determine if it is safe to shutdown.
 	    By default mythshutdown is silent and does not produce any output on the
 	    console. This is by design because it is called often by mythwelcome and
 	    mythbackend. You can add this parameter to make mythwelcome output some
 	    messages to the console.
 	    Add this parameter to show more debug messages               
 	Because you would normally run mythwelcome and the mythshutdown script as
 	a normal user without root privileges you will need to setup sudo to allow
 	you to run the mythshutdown --shutdown as the root user to allow it to
	run reboot, poweroff, grub/lilo and nvram-wakeup. 
	add the following line to your '/etc/sudoers' file:
	mythtv localhost = NOPASSWD: /usr/bin/mythshutdown
	Change mythtv to the user you use to run mythwelcome and the mythshutdown program.
	You may also have to change the path to mythshutdown to suit your setup.
	You can optionally set one or two periods in a day that you would like your
	Myth system to wake up for. The periods are set on the mythwelcome
	settings screen (press i/INFO key). The mythshutdown program will wakeup
	the system and prevent it shutting down during these periods even if it is idle.
	Note: currently the settings do not handle periods that cross midnight. For
	example you cannot define a period of 19.00 to 01.00.
 	If you press the m/MENU key mythwelcome will display a popup menu with the
 	following options.
 	Lock Shutdown        -  Prevents the system from shutting down even if it is idle.
 	Unlock Shutdown      -  Allows the system to shutdown when it is idle.
 	Run Mythfilldatabase -  Force mythfilldatabase to run now.
 	Shutdown Now         -  Force the system to shutdown even if it is not idle or is
 	                        in a wakeup/shutdown period.
 	                        FE only machines simply shutdown using the 'Poweroff command'
 	                        that has been setup in settings.
 	                        Master BE machines will not shutdown if the backend
 	                        is recording or is about to start recording otherwise
 	                        mythwelcome sets the time of the next wakeup and shuts down
 	                        the system.
 	                        Requires sudo to be setup properly to allow mythwelcome to call
 	                        the mythshutdown program with root privileges. See above.
 	Exit                 -  Exit the mythwelcome application.
 	Cancel               -  Cancel the popup menu.                                     
 	There is an hidden feature that allows you to start an xterm from the mythwelcome
 	screen. Useful if you need to do some trouble shooting. You can access it by
 	pressing the F12 key (default key binding). You can change the command that will
 	be used to start the xterm on the Mythshutdown settings page (F11 key).
 	Make the wakeup/shutdown periods a little more flexible by allowing periods to cross