Difference between revisions of "Powernowd"

From MythTV Official Wiki
Jump to: navigation, search
m
(Added EOL tag)
 
Line 1: Line 1:
 +
{{EOL2|Most distributions have moved to Intel pstate driver or cpufreqs utility.}}
 +
 
[http://www.deater.net/john/powernowd.html PowerNowd] uses the CPUFreq sysfs interface to set the frequency of the processor depending on the system's current condition. I run PowerNowd on my backend (AMD64 3700+) and whenever the machine is idle the machine runs at 1000MHz which is a 7 degree reduction from when it's running at full speed. PowerNowd was designed to work with AMD's PowerNow technology. AMD's Cool-N-Quiet technology coupled with PowerNowd creates the perfect solution for a cool and quiet solution.
 
[http://www.deater.net/john/powernowd.html PowerNowd] uses the CPUFreq sysfs interface to set the frequency of the processor depending on the system's current condition. I run PowerNowd on my backend (AMD64 3700+) and whenever the machine is idle the machine runs at 1000MHz which is a 7 degree reduction from when it's running at full speed. PowerNowd was designed to work with AMD's PowerNow technology. AMD's Cool-N-Quiet technology coupled with PowerNowd creates the perfect solution for a cool and quiet solution.
  

Latest revision as of 11:43, 17 December 2014

Time.png End Of Life: Most distributions have moved to Intel pstate driver or cpufreqs utility.

PowerNowd uses the CPUFreq sysfs interface to set the frequency of the processor depending on the system's current condition. I run PowerNowd on my backend (AMD64 3700+) and whenever the machine is idle the machine runs at 1000MHz which is a 7 degree reduction from when it's running at full speed. PowerNowd was designed to work with AMD's PowerNow technology. AMD's Cool-N-Quiet technology coupled with PowerNowd creates the perfect solution for a cool and quiet solution.


Important.png Note: A Linux v2.5+ kernel is required with appropriate modules configured under `Power Management support >> CPU Frequency scaling`


By default PowerNowd will not adjust its frequency settings for `nice` programs so your transcode jobs will run much slower. I'd recommend starting PowerNowd with the following:

powernowd -qn

That will start the daemon in quiet mode plus take `nice` programs into consideration. Please visit PowerNowd's website to read documentation and download.