Difference between revisions of "Status Monitoring How To"
Wild Penguin (talk | contribs) (→Configuration: Add ip address to monit config file (needed if backend is configured so that frontend is not on the same machine, i.e. services not listening to 127.0.0.1) |
Wild Penguin (talk | contribs) m (→Configuration) |
||
Line 45: | Line 45: | ||
start program = "/etc/init.d/mythtv-backend restart" | start program = "/etc/init.d/mythtv-backend restart" | ||
stop program = "/etc/init.d/mythtv-backend stop" | stop program = "/etc/init.d/mythtv-backend stop" | ||
− | if failed host 127.0.0.1 port 6544 proto http then restart | + | if failed host 127.0.0.1 port 6544 proto http then restart # change if not listening locally |
mode manual | mode manual | ||
depends on mysql | depends on mysql | ||
Line 53: | Line 53: | ||
start program = "/etc/init.d/mysql start" | start program = "/etc/init.d/mysql start" | ||
stop program = "/etc/init.d/mysql stop" | stop program = "/etc/init.d/mysql stop" | ||
− | if failed host 127.0.0.1 port 3306 then restart | + | if failed host 127.0.0.1 port 3306 then restart # change if not listening locally |
mode manual | mode manual | ||
</pre> | </pre> |
Revision as of 13:28, 19 May 2013
So, for whatever reason, your Myth processes have occasional crashes that you haven't diagnosed yet (you have submitted a bug report, haven't you?) and you'd like it to restart when it does...
This page has a few approaches to monitoring Myth's processes
Contents
Monit
Monit (http://www.tildeslash.com/monit/)
- It monitors processes and restarts them if they fail.
- Can be configured to alert you (I like to know if it crashes in case it gets serious!)
- It is 'secure'able
- Has a web interface to check status and log
- Can also monitor anything else (eg listings downloads, disk space etc)
Installation
Debian/knoppmyth install : apt-get install monit
Configuration
- On Debian create
/etc/monit/monitrc
- On openSUSE create
/etc/monitrc
# Monit control file # # Comments begin with a '#' and extend through the end of the line. # Blank lines between program entries are ignored. Keywords are case # insensitive. All path's MUST BE FULLY QUALIFIED, starting with '/' # set daemon 30 set logfile /var/log/monit.log set mailserver smtp.mydomain.com set mail-format { from: monit@bao.mydomain.com } set alert root@mydomain.com # Send alert to system admin on any event set httpd port 2812 and allow ash.mydomain.com allow 10.0.0.90 allow 127.0.0.1 allow haze.mydomain.com allow admin:monit # user 'admin' with password 'monit' check process mythbackend with pidfile /var/run/mythtv/mythbackend.pid group mythtv start program = "/etc/init.d/mythtv-backend restart" stop program = "/etc/init.d/mythtv-backend stop" if failed host 127.0.0.1 port 6544 proto http then restart # change if not listening locally mode manual depends on mysql check process mysql with pidfile /var/run/mysqld/mysqld.pid group mythtv start program = "/etc/init.d/mysql start" stop program = "/etc/init.d/mysql stop" if failed host 127.0.0.1 port 3306 then restart # change if not listening locally mode manual
Obviously change the names/ip addresses as needed!
NOTE: It has been reported that mythbackend could crash from repeated pinging of http port (I didn't see anything in my mythbackend log but my backend crashed almost daily until I made the following change). If you find that monit frequently reports failed protocol test, it may be monit causing the problem and you may want to consider commenting out the line:
if failed port 6544 proto http then restart
If you have configured mythtvbackend to be connected from a frontend on another computer on your local network instead of localhost (127.0.0.1), the above (or omitting "host 127.0.0.1" altogether, which will have identical outcome) will fail, since the backend does not listen connections to localhost anymore (only the local ip, like 192.168.X.X). Same applies probably for mysql, too.
If your backend log file starts showing error messages like this:
QSocketDevice::writeBlock: Invalid socket
, then removing the "proto http" in your monit configuration may help also.
Now, sudo monit to start monit.
Note that this tells monit to start in 'manual' mode. To actually start monitoring I have this script in /etc/monit/monit_delay
.
sleep 60 monit monitor mythbackend
which is called from the monit init.d script after monit is started. This ensures that when monit starts up it allows enough time for all the other services to get going before it kills them or anything...
Now, check it's all working by connecting to http://yourbox:2812/
You should see a web page.
Now try doing an /etc/init.d/mythtv-backend stop
. You should get a mail and the backend should restart.
Now try doing an /etc/init.d/mysql stop
. You should get a mail and the backend should stop, mysql should start and then the backend should restart.
Once all this works, you can consider moving on to the next bit...
Paranoia
So what if monit crashes??? asks Craig Partin...
Well, if you like you can run monit from init
.
In this case, just put the following line in your /etc/inittab
moni:235:respawn:/usr/sbin/monit
Then init
watches and makes sure that monit is running (and if init dies you've got a whole heapload of problems!!)
But make sure you don't start monit from your init.d script (but don't forget the monit_delay...)
So, why not run mythbackend like this?
You could - however, it's not the best way to do it - the backend may start before mysql - or your frontend may start before the backend does. For this reason the rc3.d and rc5.d scripts are numbered to start in a certain order to ensure that mysql starts before the backend which starts before the frontend etc.
Daemon Tools
Daemontools (http://cr.yp.to/daemontools.html)
Daemontools is another very similar mechanism that you may prefer. It has the advantage of starting and monitoring the process, so there's no danger of mythbackend starting up before daemontools.
Install
apt-get install daemontools-installer
This will set up your inittab, start the supervise process, and create the appropriate directories (assuming you accepted the defaults during the install). Nothing will start, however, until you create the appropriate files under the /service
directory. There's no support in daemontools for service startup order (ie. dependencies), so you have to check in the run script.
Configure
Daemontools looks for a file called /service/servicename/run
to start the program. So we'll call our service mythbackend, hence
/service/mythbackend/run
#!/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin DAEMON=/usr/bin/mythbackend MYSQLHOST=localhost MYSQLADMIN=/usr/bin/mysqladmin if [ -x $MYSQLADMIN ] then $MYSQLADMIN -h$MYSQLHOST ping &> /dev/null fi if [ $? -eq 0 ] # ping worked then exec $DAEMON --logfile /var/log/mythtv/mythbackend.log else logger "Mysqld not running yet. Waiting..." fi
As soon as you make this file executable supervise will try and start up mythbackend, so make sure you've stopped the existing process (eg: /etc/init.d/mythbackend stop
) and removed the existing startup script (I moved mythbackend from /etc/init.d/
to </root
).
Quick and Dirty
So if all that gets to complicated then try running a script like this (from Will Dorman) periodically from cron:
#!/bin/bash pidno=$( ps ax | grep mythbackend | grep -v grep | grep -v mythmon) # echo $pidno # Checks for pid in "ps" listing, field #1. # Then makes sure it is the actual process, not the process invoked by this script. # The last "grep $1" filters out this possibility. if [ -z "$pidno" ] # If, after all the filtering, the result is a zero-length string, then # no running process corresponds to the pid given. echo "No such process running." mail <mynumber>@mobile.att.net -s Uh-oh < /tmp/crap exit $E_NOSUCHPROCESS fi
Even Dirtier
A simpler way to see if a process is running is using ps -C <command> and look at the exit code of ps; ps will error if it can't find the process. Much like the Quick and Dirty, this can be run from root's crontab:
*/5 * * * * /root/bin/mythmon || /sbin/service mythbackend restart > /dev/null;
A nice feature of bash is that you can OR two commands together. The second command is tried iff (if and only if) the first command fails. Similarly, ANDing two commands, the second is executed iff the first is successful. /sbin/service is a feature of Fedora/RedHat.
#!/bin/bash # # /root/bin/mythmon # This is run from cron every 5 minutes. # ps -C mythbackend > /dev/null && exit 0; # append message to log file... # send email notification... echo "`date +%Y-%m-%d\ %T.%-3N` /root/bin/mythmon: mythbackend not running!!!" \ >> /var/log/mythtv/mythbackend.log; exit 1;
Same thing for Mythbuntu
Here is the same code updated for Mythbuntu 0.21. I made changes to support Mythbuntu and to use my own preferred directory for the script (in /root instead of /root/bin). I also added support for mythtv-setup. When mythtv-setup runs it closes the backend. It would be unwise for us to restart the backend while setup is running.
I put the following into /etc/cron.d/mythtv-watchdog (rather than into root's crontab):
# # monitor the mythbacked service and restart it if it exists # */5 * * * * root /root/mythmon || /etc/init.d/mythtv-backend restart > /dev/null;
I changed mythmon to the following (and put it in /root/mythmon instead of /root/bin/mythmon):
#!/bin/bash # # /root/mythmon # This is run from cron every 5 minutes. # # check for mythbackend running ps -C mythbackend > /dev/null && exit 0; # also check for mytv-setup running (it closes the backend) ps -C mythtv-setup > /dev/null && exit 0; # append message to log files ... echo "`date +%Y-%m-%d\ %T.%-3N` /root/mythmon: mythbackend not running!!!" \ >> /var/log/mythtv/mythbackend.log; echo "`date +%Y-%m-%d\ %T.%-3N` /root/mythmon: mythbackend not running!!!" \ >> /var/log/mythtv/mythmon.log exit 1;
You will also notice that I append to the standard mythbackend log file and I also write to a private log file just for mythmon. This makes it easy to see when the backend was restarted without having to search through all the mythbackend logs.
Or Quick
This script restarts the mythbackend process right away without polling, sends you an email and creates handy numerated log files.
Notes:
- This script assumes you have email working on your box (like postfix). If not, just delete the mail line.
- Run the script at startup, i.e. add "/home/mythtv/gomythbe.sh &" to /etc/rc.local (Fedora)
- The script will restart mythbackend 10 times before stopping and is a fail safe in case something is really wrong...
#!/bin/bash # # Press Ctrl+C to stop the restarting echo "###############################" echo "# MythBackEnd Server Starting #" echo "###############################" echo To stop the restarting press Ctrl+C when the server is being restarted echo trap 'echo; echo $SRV Server Restarter has been STOPPED!; exit 1' 2 C1=0 # Repeat the loop 10 times before exiting while [ $C1 -le 10 ] do C1=$((C1+=1)) # Modify the line below to match your server execution command line mythbackend > /home/mythtv/mythbackend_$C1.log echo "MythBackend server restarted $C1 time(s)!" # Send an email - put in your email address!! mail -s "MythBackEnd - Process restarted $C1 Times" my@emailaddress.com < /home/mythtv/mythbackend_$C1.log sleep 10 done