Difference between revisions of "SureWest IPTV"

From MythTV Official Wiki
Jump to: navigation, search
(Oops, must use V2 not V1!)
 
(15 intermediate revisions by 6 users not shown)
Line 1: Line 1:
 +
SureWest uses IPTV by sending the raw MPEG2TS (or as of 5/24/2009, h264) stream directly to a UDP multicast address.  This means it's relatively easy to set up mythtv.  Their DVR interface is horrible, and so mythtv is a huge step up.  If you order their DVR, you should be allowed to record two channels at once by setting up two identical tuners. For two tuners to work correctly, you need at least SVN revision 18969 (on the 0.21 branch.) Otherwise it works around half the time. PIP also works sometimes.
 +
 +
On [[User:rkuris|my box]], recording two channels at once makes watching a third unusable (too choppy) but with a very fast CPU and disk subsystem you might be able to record perhaps three or four channels and still watch something.
 
==What you need==
 
==What you need==
 +
* MythTV 0.21 or better with the built-in IPTV tuner
 
* SureWest Fiber IPTV
 
* SureWest Fiber IPTV
 
* An Amino or DVR settop box
 
* An Amino or DVR settop box
 
* A spare network port on your mythtv box (sharing with your WAN network is a very bad idea).  This card needs to support software setup of the MAC address (most do).
 
* A spare network port on your mythtv box (sharing with your WAN network is a very bad idea).  This card needs to support software setup of the MAC address (most do).
== Cable Box Setup ==
+
* As of 5/24/2009, SureWest has switched from MPEG2 streams to h264 for their HD channels. For this reason, a video card supporting [[VDPAU]] is recommended for an HDTV frontent, unless the frontend has a very powerful CPU.
* Get your cable box MAC.  This is written right on the box, usually on the bottom or the side.  You need it to fool SureWest that everything is coming from your registered MAC.
+
* As of 2014 merger between Surewest and CC, these features no longer work.
* Force the MAC address on your spare network card to match the one on your set-top box.
+
 
* Set the mythtv box to use DHCP.  Do <b>not</b> allow dhcp to set the default route.  Instead, force a route as follows (substitute ethN for the correct network card name):
+
[[Category:HOWTO]]
route add -net 224.0.0.0/8 ethN
+
[[Category:Scripts]]
* Switch your system to use IGMP v2:
 
echo 2 > /proc/sys/net/ipv4/conf/all/force_igmp_version
 
* Unplug the network cable from your operating set-top box and plug it into your dedicated mythtv box.  Bring up the interface.
 
* Verify that you can watch video.  Use "mplayer udp://225.1.100.1:2001" and watch SureWest ads for at least 10 minutes (not a joke; this is to make sure that the IGMP timeouts are all propogating properly)
 
* Create an m3u file to correspond to the surewest channels.  They use group 225.1.x.y where x=c/100 and y=c%100 (using 100 instead when the result is 0).  For example, channel 1 is 225.1.100.1 and channel 255 is 225.1.2.55.  Your m3u file should look like this:
 
<pre>
 
#EXTM3U
 
#EXTINF:0,1 - LOOR001
 
#EXTMYTHTV:xmltvid=23309
 
udp://225.1.100.1:2001
 
#EXTINF:0,2 - WGNSAT
 
#EXTMYTHTV:xmltvid=17098
 
udp://225.1.100.2:2001
 
#EXTINF:0,3 - KCRA
 
#EXTMYTHTV:xmltvid=10388
 
udp://225.1.100.3:2001
 
#EXTINF:0,4 - KQCA
 
#EXTMYTHTV:xmltvid=10683
 
udp://225.1.100.4:2001
 
...
 
</pre>
 
* Set up a freebox IPTV tuner in mythtv.  Use the m3u file you created.
 
* Set up Schedules Direct for your listings.  It sure would be nice to sniff the listings too, but Schedules Direct is cheap.
 

Latest revision as of 21:17, 10 January 2015

SureWest uses IPTV by sending the raw MPEG2TS (or as of 5/24/2009, h264) stream directly to a UDP multicast address. This means it's relatively easy to set up mythtv. Their DVR interface is horrible, and so mythtv is a huge step up. If you order their DVR, you should be allowed to record two channels at once by setting up two identical tuners. For two tuners to work correctly, you need at least SVN revision 18969 (on the 0.21 branch.) Otherwise it works around half the time. PIP also works sometimes.

On my box, recording two channels at once makes watching a third unusable (too choppy) but with a very fast CPU and disk subsystem you might be able to record perhaps three or four channels and still watch something.

What you need

  • MythTV 0.21 or better with the built-in IPTV tuner
  • SureWest Fiber IPTV
  • An Amino or DVR settop box
  • A spare network port on your mythtv box (sharing with your WAN network is a very bad idea). This card needs to support software setup of the MAC address (most do).
  • As of 5/24/2009, SureWest has switched from MPEG2 streams to h264 for their HD channels. For this reason, a video card supporting VDPAU is recommended for an HDTV frontent, unless the frontend has a very powerful CPU.
  • As of 2014 merger between Surewest and CC, these features no longer work.