Troubleshooting:NVP: Timed out waiting for free video buffers

From MythTV Official Wiki
Revision as of 00:10, 26 May 2007 by Orphaze (talk | contribs) (Resolution For High Precision Event Timers Issue)

Jump to: navigation, search

Error message

NVP: Timed out waiting for free video buffers

Error occurs when trying to watch live television. Error can be intermittent. Menu navigation is usually reliable. Error is usually reproduceable by trying to change channels. The error can also occur such that you are unable to play any recording or liveTV at all. In this case, you might see the first frame of the video when playing, but then it promptly freezes and needs a "killall mythfrontend" to fix.

Causes

This is likely caused by a conflict between the nvidia and glx drivers. The issue also might be having "High Precision Event Timers" enabled in your bios, which has been known to cause the full mythfrontend lockup issue previously stated.

Resolution For GLX Issue

First, to verify the issue, check your xorg.conf (/etc/X11/xorg.conf on Fedora Core). Under the modules section is glx listed? Under the video card are you using the nvidia driver?

There are two ways to resolve the problem. You can either disable glx in xorg.conf and turn off the glx effects in mythfrontend or you can use the nv driver which reportedly plays nicer with glx. My solution was to turn off glx. Follow these steps to turn off glx:

  1. Launch mythfrontend
  2. In Setup, turn off all glx and OpenGL effects
  3. Quit mythfrontend
  4. Edit xorg.conf by commenting out or removing the glx driver
  5. Restart your xserver
  6. Launch mythfrontend

Note that if you are unable to launch mythfrontend or navigate the front end menus, you can use the command line to turn off glx:

mythfrontend -O ThemePainter=qt

Resolution For High Precision Event Timers Issue

Disable the "High Precision Event Timers" (or HPET) function in your system bios. This and this alone was able to remedy the above full mythfrontend lockup issue on an MSI P6N SLI motherboard with a nForce 650i chipset running kernel 2.6.21.