Ubuntu lirc configuration files

From MythTV Official Wiki
Revision as of 03:53, 17 September 2007 by Yahooadam (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

About

As i very often suggest what peoples configuration files should look like in IRC, i thought i would write it down for all to see

P.s. I think this guide needs some work, im just getting the basics down on paper while their fresh in my head

Types of Remote

If your using one of these USB remotes http://www.mythtv.org/wiki/index.php/MCE_Remote You are either using lirc_mceusb or lirc_mceusb2

lirc_mceusb

sudo vim /etc/lirc/hardware.conf
# /etc/lirc/hardware.conf
#
# Arguments which will be used when launching lircd
LIRCD_ARGS=""

#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD=false

#Try to load appropriate kernel modules
LOAD_MODULES=true

# Run "lircd --driver=help" for a list of supported drivers.
DRIVER=""
# If DEVICE is set to /dev/lirc and devfs is in use /dev/lirc/0 will be
# automatically used instead
DEVICE=""
MODULES="lirc_mceusb"

# Default configuration files for your hardware if any
LIRCD_CONF=""
LIRCMD_CONF=""
sudo vim /etc/lirc/lirc-modules-source.conf
#   lirc-modules-source config file used by Debian GNU/Linux

# Space separated list of lirc kernel drivers to build
LIRC_MODULES="mceusb"

# It87 module configuration
LIRC_IT87_CFLAGS="UNCONFIGURED"

# Parallel module configuration
LIRC_PARALLEL_PORT="UNCONFIGURED"
LIRC_PARALLEL_IRQ="UNCONFIGURED"
LIRC_PARALLEL_TIMER="UNCONFIGURED"

# Serial module configuration
LIRC_SERIAL_PORT="UNCONFIGURED"
LIRC_SERIAL_IRQ="UNCONFIGURED"
LIRC_SERIAL_CFLAGS="UNCONFIGURED"

# Sir module configuration
LIRC_SIR_PORT="UNCONFIGURED"
LIRC_SIR_IRQ="UNCONFIGURED"
LIRC_SIR_CFLAGS="UNCONFIGURED"

lirc_mceusb2

sudo vim /etc/lirc/hardware.conf
# /etc/lirc/hardware.conf
#
# Arguments which will be used when launching lircd
LIRCD_ARGS=""

#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD=false

#Try to load appropriate kernel modules
LOAD_MODULES=true

# Run "lircd --driver=help" for a list of supported drivers.
DRIVER=""
# If DEVICE is set to /dev/lirc and devfs is in use /dev/lirc/0 will be
# automatically used instead
DEVICE=""
MODULES="lirc_mceusb2"

# Default configuration files for your hardware if any
LIRCD_CONF=""
LIRCMD_CONF=""
sudo vim /etc/lirc/lirc-modules-source.conf
#   lirc-modules-source config file used by Debian GNU/Linux

# Space separated list of lirc kernel drivers to build
LIRC_MODULES="mceusb2"

# It87 module configuration
LIRC_IT87_CFLAGS="UNCONFIGURED"

# Parallel module configuration
LIRC_PARALLEL_PORT="UNCONFIGURED"
LIRC_PARALLEL_IRQ="UNCONFIGURED"
LIRC_PARALLEL_TIMER="UNCONFIGURED"

# Serial module configuration
LIRC_SERIAL_PORT="UNCONFIGURED"
LIRC_SERIAL_IRQ="UNCONFIGURED"
LIRC_SERIAL_CFLAGS="UNCONFIGURED"

# Sir module configuration
LIRC_SIR_PORT="UNCONFIGURED"
LIRC_SIR_IRQ="UNCONFIGURED"
LIRC_SIR_CFLAGS="UNCONFIGURED"

lirc_serial

sudo vim /etc/lirc/hardware.conf
# /etc/lirc/hardware.conf
#
# Arguments which will be used when launching lircd
LIRCD_ARGS=""

#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD=false

#Try to load appropriate kernel modules
LOAD_MODULES=true

# Run "lircd --driver=help" for a list of supported drivers.
DRIVER=""
# If DEVICE is set to /dev/lirc and devfs is in use /dev/lirc/0 will be
# automatically used instead
DEVICE=""
MODULES="lirc_dev lirc_serial"

# Default configuration files for your hardware if any
LIRCD_CONF=""
LIRCMD_CONF=""
sudo vim /etc/lirc/lirc-modules-source.conf
#   lirc-modules-source config file used by Debian GNU/Linux

# Space separated list of lirc kernel drivers to build
LIRC_MODULES="serial"

# It87 module configuration
LIRC_IT87_CFLAGS="UNCONFIGURED"

# Parallel module configuration
LIRC_PARALLEL_PORT="UNCONFIGURED"
LIRC_PARALLEL_IRQ="UNCONFIGURED"
LIRC_PARALLEL_TIMER="UNCONFIGURED"

# Serial module configuration
LIRC_SERIAL_PORT="0x03f8"
LIRC_SERIAL_IRQ="4"
LIRC_SERIAL_CFLAGS=" -DLIRC_SERIAL_TRANSMITTER -DLIRC_SERIAL_SOFTCARRIER"

# Sir module configuration
LIRC_SIR_PORT="UNCONFIGURED"
LIRC_SIR_IRQ="UNCONFIGURED"
LIRC_SIR_CFLAGS="UNCONFIGURED"