Difference between revisions of "User:AndrewAllison"
From MythTV Official Wiki
Stevegoodey (talk | contribs) m (Typo.) |
|||
| (17 intermediate revisions by one other user not shown) | |||
| Line 3: | Line 3: | ||
AMD Phenom II X4 965 Processor | AMD Phenom II X4 965 Processor | ||
nVidia Corporation NV44 [GeForce 6200 TurboCache | nVidia Corporation NV44 [GeForce 6200 TurboCache | ||
| − | Hauppaupe | + | Hauppaupe HVR-950 |
Hauppauge 150 | Hauppauge 150 | ||
Hauppauge 500 | Hauppauge 500 | ||
| + | Pinnacle Systems, Inc. Remote Kit Infrared Transceiver | ||
'''Standard Files''' | '''Standard Files''' | ||
| Line 12: | Line 13: | ||
/etc/my.cnf | /etc/my.cnf | ||
| − | |||
[mysqld] | [mysqld] | ||
datadir=/var/lib/mysql | datadir=/var/lib/mysql | ||
| Line 28: | Line 28: | ||
pid-file=/var/run/mysqld/mysqld.pid | pid-file=/var/run/mysqld/mysqld.pid | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
/etc/lirc/lircd.conf | /etc/lirc/lircd.conf | ||
# | # | ||
| − | |||
| − | |||
# | # | ||
| − | # contributed by | + | # contributed by Andrew Allison |
# | # | ||
| − | # brand: | + | # brand: PCTV (Hauppauge) USB MCE Remote |
| − | # model: | + | # model no. of remote control: RRS9002-8601FC |
| − | # | + | # devices being controlled by this remote: Pinnacle IR Receiver / Blaster |
| − | |||
| − | |||
| − | |||
# | # | ||
| + | |||
begin remote | begin remote | ||
| − | name | + | name pctv.usb.remote |
bits 13 | bits 13 | ||
| − | flags | + | flags RC6|CONST_LENGTH |
eps 30 | eps 30 | ||
aeps 100 | aeps 100 | ||
| − | one | + | header 2694 840 |
| − | zero | + | one 471 413 |
| − | + | zero 471 413 | |
| − | gap | + | pre_data_bits 24 |
| − | + | pre_data 0x1BFF83 | |
| + | gap 105342 | ||
| + | min_repeat 2 | ||
| + | # suppress_repeat 2 | ||
| + | # uncomment to suppress unwanted repeats | ||
| + | toggle_bit_mask 0x8000 | ||
| + | rc6_mask 0x100000000 | ||
begin codes | begin codes | ||
| − | + | KEY_POWER 0x13 | |
| − | + | KEY_PAUSE 0x037FF07BE7 | |
| − | + | KEY_RECORD 0x037FF07BE8 | |
| − | + | KEY_STOP 0x037FF07BE6 | |
| − | + | KEY_REWIND 0x037FF07BEA | |
| − | + | KEY_PLAY 0x037FF07BE9 | |
| − | + | KEY_FORWARD 0x037FF07BEB | |
| − | + | KEY_FRAMEBACK 0x037FF07BE4 | |
| − | + | KEY_FRAMEFORWARD 0x037FF07BE5 | |
| − | + | KEY_BACK 0x1BDC | |
| − | + | KEY_INFO 0x1BF0 | |
| − | + | KEY_LEFT 0x1BDF | |
| − | + | KEY_RIGHT 0x1BDE | |
| − | + | KEY_OK 0x037FF07BDD | |
| − | + | KEY_UP 0x1BE1 | |
| − | + | KEY_DOWN 0x1BE0 | |
| − | + | KEY_VOLUMEUP 0x037FF07BEF | |
| − | + | KEY_VOLUMEDOWN 0x037FF07BEE | |
| − | + | KEY_RESSTART 0x1BF2 | |
| − | + | KEY_CHANNELDOWN 0x037FF07BEC | |
| − | + | KEY_CHANNELUP 0x037FF07BED | |
| + | KEY_MUTE 0x1BF1 | ||
| + | KEY_SWITCHVIDEOMODE 0x1BB7 | ||
| + | KEY_EPG 0x1BD9 | ||
| + | KEY_TV 0x1BDA | ||
| + | KEY_VIDEO 0x1BDB | ||
| + | KEY_1 0x1BFE | ||
| + | KEY_2 0x1BFD | ||
| + | KEY_3 0x1BFC | ||
| + | KEY_4 0x1BFB | ||
| + | KEY_5 0x1BFA | ||
| + | KEY_6 0x1BF9 | ||
| + | KEY_7 0x1BF8 | ||
| + | KEY_8 0x1BF7 | ||
| + | KEY_9 0x1BF6 | ||
| + | KEY_0 0x1BFF | ||
| + | KEY_CLEAR 0x037FF07BF5 | ||
| + | KEY_ENTER 0x037FF07BF4 | ||
| + | KEY_RED 0x037FF07BA4 | ||
| + | KEY_GREEN 0x037FF07BA3 | ||
| + | KEY_YELLOW 0x037FF07BA2 | ||
| + | KEY_BLUE 0x037FF07BA1 | ||
| + | KEY_NUMERIC_STAR 0x037FF07BE2 | ||
| + | KEY_NUMERIC_POUND 0x037FF07BE3 | ||
| + | KEY_SUBTITLE 0x037FF07BA5 | ||
end codes | end codes | ||
end remote | end remote | ||
| + | |||
| + | |||
| + | /home/mythtv/.lircrc | ||
| + | |||
| + | |||
| + | # lircrc config file for the Microsoft Media Center Edition Remote, model 1039 | ||
# | # | ||
| − | # | + | # @url $URL$ |
| − | # | + | # @date $Date: 2008-03-08 23:30:22 -0500 (Sat, 08 Mar 2008) $ |
| − | # | + | # @version $Revision: 16474 $ |
| − | # | + | # @author $Author: kormoc $ |
# | # | ||
| − | # | + | # This file is intended to complement the lircd.conf.mceusb file included with |
| − | # | + | # lirc 0.8 and above. |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
# | # | ||
| − | # this | + | # Save this file in ~/.mythtv/lircrc |
| − | |||
# | # | ||
| − | # | + | # You will also need to make a few changes to the MythTV key bindings and jump |
| + | # points as follows. | ||
# | # | ||
| − | # | + | # Jump Points: |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
# | # | ||
| − | + | # TV Recording Playback: Alt+R | |
| − | + | # Program Guide: Alt+G | |
| − | + | # Live TV: Alt+P | |
| − | + | # MythVideo -> The MythVideo default view: Alt+V | |
| − | + | # Main Menu: Alt+Home | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
# | # | ||
| − | # | + | # Key Bindings: |
| − | |||
# | # | ||
| − | # | + | # TV Playback -> CHANNELDOWN: Down,PgDown |
| − | + | # TV Playback -> CHANNELUP: Up,PgUp | |
| − | # | + | # TV Playback -> JUMPRWND: Shift+PgUp |
| − | # | + | # TV Playback -> JUMPFFWD: Shift+PgDown |
| − | # | ||
# | # | ||
| − | + | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
# | # | ||
| − | # | + | # Program Navigation |
| − | |||
# | # | ||
| − | |||
# | # | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = Home | |
| − | + | config = Alt+Home | |
| − | + | repeat = 2 | |
end | end | ||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = RecTV | |
| − | + | config = Alt+R | |
| − | + | repeat = 2 | |
end | end | ||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_EPG | |
| − | + | config = Alt+G | |
| − | + | repeat = 2 | |
end | end | ||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_TV | |
| − | + | config = Alt+P | |
| − | + | repeat = 2 | |
end | end | ||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_VIDEO | |
| − | + | config = Alt+V | |
| − | + | repeat = 2 | |
end | end | ||
| − | # | + | # |
| + | # Menu Navigation | ||
| + | # | ||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_BACK | |
| − | + | config = Esc | |
| − | + | repeat = 2 | |
end | end | ||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_OK | |
| − | + | config = Space | |
| − | + | repeat = 2 | |
end | end | ||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = More | |
| − | + | config = I | |
| − | + | repeat = 2 | |
end | end | ||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_LEFT | |
| − | + | config = Left | |
| − | + | repeat = 2 | |
end | end | ||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_RIGHT | |
| − | + | config = Right | |
| − | + | repeat = 2 | |
end | end | ||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_UP | |
| − | + | config = Up | |
| − | + | repeat = 2 | |
end | end | ||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_DOWN | |
| − | + | config = Down | |
| − | + | repeat = 2 | |
end | end | ||
| − | # | + | # TV Control |
| + | # | ||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_VOLUMEDOWN | |
| − | + | config = F10 | |
| + | repeat = 2 | ||
end | end | ||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_VOLUMEUP | |
| − | + | config = F11 | |
| + | repeat = 2 | ||
end | end | ||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_MUTE | |
| − | + | config = F9 | |
| + | repeat = 2 | ||
end | end | ||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_CHANNELDOWN | |
| − | + | config = PgDown | |
| + | repeat = 2 | ||
end | end | ||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_CHANNELUP | |
| − | + | config = PgUp | |
| + | repeat = 2 | ||
end | end | ||
| − | # | + | # |
| + | # Video Navigation | ||
| + | # | ||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_PLAY | |
| − | + | config = P | |
| − | + | repeat = 2 | |
end | end | ||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_PAUSE | |
| − | + | config = P | |
| − | + | repeat = 2 | |
end | end | ||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_STOP | |
| − | + | config = Esc | |
| − | + | repeat = 2 | |
end | end | ||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_FORWARD | |
| − | + | config = > | |
| − | + | repeat = 2 | |
end | end | ||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_REWIND | |
| − | + | config = < | |
| − | + | repeat = 2 | |
end | end | ||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_FRAMEBACK | |
| − | + | config = Q | |
| − | + | repeat = 2 | |
end | end | ||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_FRAMEFORWARD | |
| − | + | config = Z | |
| − | + | repeat = 2 | |
end | end | ||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_RECORD | |
| − | + | config = R | |
| − | + | repeat = 2 | |
end | end | ||
| − | # | + | # |
| + | # | ||
| + | # Miscellaneous | ||
| + | # | ||
| + | # | ||
| + | # M for Menu | ||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_INFO | |
| − | + | config = M | |
| − | + | repeat = 2 | |
end | end | ||
| − | |||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = Hash | |
| − | + | config = M | |
| − | + | repeat = 2 | |
end | end | ||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_CLEAR | |
| − | + | config = Esc | |
| − | + | repeat = 2 | |
end | end | ||
| − | # | + | #begin |
| + | # prog = mythtv | ||
| + | # button = Enter | ||
| + | # config = Space | ||
| + | #end | ||
| + | # | ||
| + | # Numbers | ||
| + | # | ||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_0 | |
| − | + | config = 0 | |
| − | + | repeat = 2 | |
end | end | ||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_1 | |
| − | + | config = 1 | |
| − | + | repeat = 2 | |
end | end | ||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_2 | |
| − | + | config = 2 | |
| − | + | repeat = 2 | |
end | end | ||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_3 | |
| − | + | config = 3 | |
| − | + | repeat = 2 | |
end | end | ||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_4 | |
| − | + | config = 4 | |
| − | + | repeat = 2 | |
end | end | ||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_5 | |
| − | + | config = 5 | |
| − | + | repeat = 2 | |
end | end | ||
| − | |||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_6 | |
| − | + | config = 6 | |
| − | + | repeat = 2 | |
end | end | ||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_7 | |
| − | + | config = 7 | |
| − | + | repeat = 2 | |
end | end | ||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_8 | |
| − | + | config = 8 | |
| − | + | repeat = 2 | |
end | end | ||
begin | begin | ||
| − | + | prog = mythtv | |
| − | + | button = KEY_9 | |
| − | + | config = 9 | |
| − | + | repeat = 2 | |
end | end | ||
begin | begin | ||
| − | + | remote = pctv.usb.remote | |
| − | + | prog = irexec | |
| − | + | button = KEY_BLUE | |
| − | + | config = /home/mythtv/start_myth.sh & | |
| − | + | repeat = 0 | |
| − | + | delay = 0 | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
end | end | ||
| + | |||
| + | |||
My Backup script | My Backup script | ||
date= date -I | date= date -I | ||
| − | nice -n 19 mysqldump -u | + | nice -n 19 mysqldump -u --password= --extended-insert --no-create-db --add-drop-table --database mythconverg > `date -I`_myth_backup_data.sql |
| − | nice -n 19 mysqldump -u | + | nice -n 19 mysqldump -u --password= --extended-insert --database mythconverg > `date -I`_myth_complete_backup_data.sql |
nice -n 19 gzip `date -I`_myth_backup_data.sql | nice -n 19 gzip `date -I`_myth_backup_data.sql | ||
nice -n 19 gzip `date -I`_myth_complete_backup_data.sql | nice -n 19 gzip `date -I`_myth_complete_backup_data.sql | ||
| Line 983: | Line 445: | ||
Crontab | Crontab | ||
| + | |||
| + | |||
| + | MAILTO="andrew.allison@gmail.com" | ||
| + | #min hour day month Sun=0 Sat=6 | ||
| + | 1 3 * * * /home/mythtv/backup-mysql.sh | ||
| + | 1 4 1 * * /home/mythtv/optimize-myth-db.sh | ||
| + | 1 1 16 * * /storage2/mirror-canvec.sh | ||
| + | |||
| − | + | /etc/rc.local | |
| − | |||
| − | |||
| − | #!/bin/ | + | #!/bin/sh |
| − | + | mount /dev/sdc1 /storage1 | |
| − | + | mount /dev/sdd1 /storage2 | |
| − | + | mount /dev/sdb1 /storage3 | |
| − | + | ||
| − | + | modprobe -r ir_rc6_decoder | |
| − | + | modprobe -r rc_rc6_mce | |
| − | + | modprobe -r ir_rc5_decoder | |
| − | + | ||
| − | + | echo lirc > /sys/class/rc/rc0/protocols | |
| − | + | ||
| − | + | #command v4l2-ctl -d /dev/video3 --list-ctrl | |
| − | + | v4l2-ctl -d /dev/video3 --set-ctrl volume=24 | |
| − | + | ||
| − | + | /bin/mythbackend --daemon --loglevel info | |
| − | + | /bin/mythjobqueue --daemon --loglevel info | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | # | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| Line 1,324: | Line 480: | ||
'''Notes on Fedora 15 Install''' | '''Notes on Fedora 15 Install''' | ||
| + | |||
| + | Section "Device" | ||
| + | Identifier "Videocard0" | ||
| + | Driver "nouveau" | ||
| + | EndSection | ||
| + | |||
| + | Section "Monitor" | ||
| + | Identifier "TV" | ||
| + | HorizSync 30-50 | ||
| + | VertRefresh 60.0 | ||
| + | EndSection | ||
| + | |||
| + | Section "Screen" | ||
| + | Identifier "Screen0" | ||
| + | Device "Videocard0" | ||
| + | Monitor "TV" | ||
| + | DefaultDepth 24 | ||
| + | EndSection | ||
| + | |||
| + | Screen Lockup / Shuddering Video | ||
| + | |||
| + | Add to grub boot the system with the noapic kernel parameter. | ||
| + | nouveau.tv_norm=NTSC-M noapic | ||
| + | |||
Using the default nouveau video driver GeForce 6200 SVideo | Using the default nouveau video driver GeForce 6200 SVideo | ||
| Line 1,338: | Line 518: | ||
rpmbuild -ba msttcorefonts-2.0-1.spec | rpmbuild -ba msttcorefonts-2.0-1.spec | ||
yum install --nogpgcheck /root/rpmbuild/RPMS/noarch/msttcorefonts-2.0-1.noarch.rpm | yum install --nogpgcheck /root/rpmbuild/RPMS/noarch/msttcorefonts-2.0-1.noarch.rpm | ||
| + | |||
| + | |||
| + | Useful Links | ||
| + | |||
| + | http://blog.grantgoodyear.org/2010_05_01_archive.html | ||
| + | |||
| + | Notes | ||
| + | |||
| + | Crash in MythNews | ||
| + | |||
| + | 2012-01-01 10:26:35.859302 I MythUIWebBrowser: Loading css from - file:///usr/local/share/mythtv/themes/default/htmls/mythbrowser.css | ||
| + | 2012-01-01 10:26:35.866052 I MythUIWebBrowser: enabling plugins | ||
| + | ** (process:7422): DEBUG: NP_Initialize | ||
| + | ** (process:7422): DEBUG: NP_Initialize succeeded | ||
| + | ** (process:7422): DEBUG: NP_Initialize | ||
| + | ** (process:7422): DEBUG: NP_Initialize succeeded | ||
| + | /builddir/build/BUILD/icedtea-web-1.0.6/plugin/icedteanp/IcedTeaNPPlugin.cc:2016: thread 0x2793a60: Error: Invalid plugin function table. | ||
| + | ** (<unknown>:7422): DEBUG: NP_Initialize | ||
| + | ** (<unknown>:7422): DEBUG: NP_Initialize succeeded | ||
| + | ** (<unknown>:7422): DEBUG: NP_Initialize | ||
| + | ** (<unknown>:7422): DEBUG: NP_Initialize succeeded | ||
| + | |||
| + | Solution | ||
| + | Remove all files in .mythtv/MythNews | ||
| + | |||
| + | SQL Profiling script | ||
| + | |||
| + | Please remember to put the password for your admin user at the point marked XXX. | ||
| + | The script waits for the SQL load to get over 75% then starts to dump | ||
| + | a file called sqlload'timestamp' to your Desktop, it stops when the | ||
| + | load falls back below 75%. | ||
| + | If a few users could run it for testing it would be useful, it ONLY | ||
| + | starts to dump when load is > 75% | ||
| + | #!/bin/sh | ||
| + | FILENOW=`date +%a"."%b%d"."%H":"%M":"%S` | ||
| + | COUNT="0" | ||
| + | cd ~/Desktop | ||
| + | LOADOUTPUT="sqlload@""$FILENOW" | ||
| + | touch "$LOADOUTPUT" | ||
| + | SQLLOAD="0" | ||
| + | while [ "$SQLLOAD" -le 75 ] ; do | ||
| + | SQLLOAD=`top -b -n 1 | grep mysqld | awk -F " " '{ print $9 }'` | ||
| + | done; | ||
| + | while [ "$SQLLOAD" -ge 75 ]; do | ||
| + | mysql -uroot -pXXXADDYOURPASSWORDHEREXXX -e"SHOW full processlist;" >> | ||
| + | "$LOADOUTPUT" | ||
| + | NEWNOW=`date +%a"."%b%d"."%H":"%M":"%S` | ||
| + | echo -e "**************\n\n\n$NEWNOW\n\n\n Next Pass" >> "$LOADOUTPUT" | ||
| + | COUNT=`echo "$COUNT + 1" | bc` | ||
| + | echo "Count $COUNT sqlload $SQLLOAD" | ||
| + | sleep 1 | ||
| + | SQLLOAD=`top -b -n 1 | grep mysqld | awk -F " " '{ print $9 }'` | ||
| + | done | ||
| + | echo "Glitch finished at $NEWNOW, end of Run" >> "$LOADOUTPUT" | ||
| + | _______________________________________________ | ||
| + | |||
| + | UDEV | ||
| + | |||
| + | KERNEL=="video[0-9]", DRIVERS=="ivtv", ATTRS{subsystem_device}=="0x8801", SYMLINK+="PVR150-0" | ||
| + | KERNEL=="video[0-9]", DRIVERS=="ivtv", ATTRS{subsystem_device}=="0xe807", SYMLINK+="PVR150-1" | ||
| + | KERNEL=="video[0-9]", DRIVERS=="ivtv", ATTRS{subsystem_device}=="0xe817", SYMLINK+="PVR150-2" | ||
| + | DRIVERS=="em28xx", SYMLINK+="HVR950-0" | ||
| + | #KERNEL=="dvb0.frontend0", DRIVERS=="em28xx", SYMLINK+="HVR950-0" | ||
| + | #KERNEL=="video[0-9]", DRIVERS=="cx18", SYMLINK+="HVR1600-1" | ||
| + | #KERNEL=="video[0-9]*", DRIVERS=="cx18", ATTRS{subsystem_device}=="0x8389", SYMLINK+="HVR1600-1" | ||
| + | |||
| + | |||
| + | Fedora 16 Service Configuration | ||
| + | |||
| + | chkconfig --list | ||
| + | |||
| + | systemctl enable mysqld.service | ||
| + | systemctl enable mythbackend.service | ||
| + | systemctl enable mythjobqueue.service | ||
| + | |||
| + | ssmtp | ||
| + | |||
| + | Fedora 19 requires the TLS_CA_File option | ||
| + | |||
| + | root=email address | ||
| + | MailHub=smtp.gmail.com:587 | ||
| + | AuthUser=email address | ||
| + | AuthPass=password | ||
| + | UseSTARTTLS=YES | ||
| + | UseTLS=YES | ||
| + | FromLineOverride=YES | ||
| + | TLS_CA_File=/etc/pki/tls/certs/ca-bundle.crt | ||
| + | |||
| + | Note about HVR2250 from mailing list | ||
| + | |||
| + | The modules for the HVR-2250 card work properly only when loaded in the | ||
| + | correct stack order. Unfortunately, due to some weird set of conditions, | ||
| + | that does not happen. I had some recordings where the sound is very | ||
| + | 'muddy' and muffled. I have not had that since I started forcing the | ||
| + | correct load order: that is, *I* do it, by a script. | ||
| + | One weird bit is that you have to 'unstack' the modules in the correct | ||
| + | (wrong) order. | ||
| + | Here is the chunk of script from my rc.local file which gets called at | ||
| + | the end of bootup. | ||
| + | # These steps are required to install the modules in the correct order | ||
| + | modprobe -r tda18271 | ||
| + | modprobe -r s5h1411 | ||
| + | modprobe -r saa7164 | ||
| + | modprobe -r s5h1411 | ||
| + | modprobe -r tda18271 | ||
| + | modprobe -r s5h1411 | ||
| + | echo " Ignore FATAL error messages above if next lines are empty" | ||
| + | lsmod | grep tad18271 | ||
| + | lsmod | grep s5h1411 | ||
| + | lsmod | grep saa7164 | ||
| + | echo " No output means modules were properly unloaded" | ||
| + | modprobe tda18271 | ||
| + | modprobe s5h1411 | ||
| + | modprobe saa7164 | ||
| + | echo " Modules re-loaded in proper order" | ||
| + | The *ANALOG* module is the saa7164 and must be last. | ||
| + | THEN and only THEN, you can restart myth. | ||
| + | So the script kills any existing myth programs, and restarts the service: | ||
| + | result=`ps -ae | grep mythbackend` | ||
| + | out=`echo $result | awk '{ print $4}'` | ||
| + | if [ "$out" = "mythbackend" ] ; then | ||
| + | killall mythbackend | ||
| + | killall mythlogserver | ||
| + | killall mythcommflag | ||
| + | killall mythfrontend | ||
| + | rm -f /run/mythtv/backend.pid | ||
| + | echo "Killed existing processes" | ||
| + | # echo "Now ready to start mythbackend, with | ||
| + | /lib/systemd/system/mythbackend.service;" | ||
| + | fi | ||
| + | #/usr/bin/systemctl status mysqld.service | ||
| + | /usr/bin/systemctl start mythbackend.service | ||
| + | /usr/bin/systemctl status mythbackend.service | ||
| + | Geoff | ||
| + | |||
| + | |||
| + | Antenna Rotor Script | ||
| + | I use this rotor controller with my Tivo, and I've created an lircd.conf file for this. I guess I never sent it in. It's attached. irrecord did | ||
| + | afairly good job, but I looked up the specs for the chip and made the values accurate. I also added a command called noop which does nothing, but will | ||
| + | turn it on if it isn't. It acts as a discrete on. | ||
| + | I also wrote a bash script, attached which can take advantage of every function the controller is capable of. for example rotor -c 22 turns to the | ||
| + | direction stored for channel 22. Hopefully it all makes sense. If you have questions or modifications to the script, I'd be very interested in them. | ||
| + | Best of luck with your project. I had a lot of fun with mine. Hope I didn't do too much of it for you already. | ||
| + | Joel Ebel | ||
| + | potuncle-+T8c/Xf75frU2QLv0tUyrdBPR1lH4CV8@xxxxxxxxxxxxxxxx wrote: | ||
| + | I am hoping to use the following IR remote controlled antenna rotor with | ||
| + | MythTV: http://www.starkelectronic.com/cmmatv.htm (first item on the | ||
| + | page). My goal will be for MythTV to, via LIRC, send an IR command to the | ||
| + | rotor controller whenever the channel is changed so that the antenna | ||
| + | points in the direction optimal for that channel. | ||
| + | Expectedly, I do not see an existing lircd.conf for this remote, so I | ||
| + | assume I have to create one myself. Has anybody used LIRC with this rotor | ||
| + | controller? If so, it would be great if I could get a copy of your | ||
| + | lircd.conf so I only have to build an IR receiver for my computer. Also, | ||
| + | if I have to create my own lircd.conf, what are my chances of irrecord | ||
| + | sucessfully creating one for me? | ||
| + | I don't mean to sound like a n00b, but I have not tinkered with LIRC much | ||
| + | in the past. | ||
| + | Thanks, | ||
| + | Jason | ||
| + | pl | ||
| + | # Please make this file available to others | ||
| + | # by sending it to <lirc-yJlpgWQrpSkOIzVOb1FTxg@xxxxxxxxxxxxxxxx> | ||
| + | # | ||
| + | # this config file was automatically generated | ||
| + | # using lirc-0.6.6(serial) on Sat Oct 25 10:20:22 2003 | ||
| + | # | ||
| + | # contributed by Joel Ebel | ||
| + | # | ||
| + | # brand: Channel Master | ||
| + | # model no. of remote control: 9537 | ||
| + | # devices being controlled by this remote: | ||
| + | # Bundled with Channel Master 9521A Antenna Rotor | ||
| + | # Compatible with many other Channel Master rotators | ||
| + | # 9500, 9510(A), 9512, 9513, 9515(A), Radio Shack 15-1225 | ||
| + | # | ||
| + | begin remote | ||
| + | name Channel_Master_9537 | ||
| + | bits 32 | ||
| + | flags SPACE_ENC|CONST_LENGTH | ||
| + | eps 30 | ||
| + | aeps 100 | ||
| + | header 9000 4500 | ||
| + | one 563 1688 | ||
| + | zero 563 563 | ||
| + | ptrail 563 | ||
| + | repeat 9000 2250 | ||
| + | gap 108000 | ||
| + | toggle_bit 0 | ||
| + | duty_cycle 33 | ||
| + | frequency 38000 | ||
| + | begin codes | ||
| + | POWER 0x0000000035CA38C7 | ||
| + | UP 0x0000000035CA08F7 | ||
| + | DOWN 0x0000000035CA8877 | ||
| + | 1 0x0000000035CA807F | ||
| + | 2 0x0000000035CA40BF | ||
| + | 3 0x0000000035CAC03F | ||
| + | 4 0x0000000035CA20DF | ||
| + | 5 0x0000000035CAA05F | ||
| + | 6 0x0000000035CA609F | ||
| + | 7 0x0000000035CAE01F | ||
| + | 8 0x0000000035CA10EF | ||
| + | 9 0x0000000035CA906F | ||
| + | 0 0x0000000035CA00FF | ||
| + | noop 0x0000000035CA18E7 | ||
| + | # This last code is not on the remote, but it can be sent to the | ||
| + | # controller to turn it on. However, if it is on, it will not | ||
| + | # turn it off. I send this before sending other commands to | ||
| + | # ensure the controller is on. | ||
| + | # | ||
| + | end codes | ||
| + | end remote | ||
| + | #!/bin/bash | ||
| + | usage() { | ||
| + | echo "usage: $0 [OPTION] | ||
| + | -c channel Turn to specified channel | ||
| + | -d direction Turn to specified direction | ||
| + | --up Rotate clockwise | ||
| + | --down Rotate counter-clockwise | ||
| + | -s Synchronize antenna | ||
| + | -p channel Program channel to current direction | ||
| + | --power Toggle power | ||
| + | --on Turn controller on | ||
| + | --off Turn controller off | ||
| + | --status Display status on controller | ||
| + | -a [on off] Turn autosync on(reset) or off | ||
| + | -t [on off] Turn 8 minute timeout on or off | ||
| + | --reset Delete all memories and reset controller | ||
| + | " | ||
| + | } | ||
| + | send() { | ||
| + | /usr/local/bin/irsend SEND_ONCE rotor noop $1 noop $2 noop $3 noop $4 noop $5 | ||
| + | echo noop $1 noop $2 noop $3 noop $4 noop $5 | ||
| + | } | ||
| + | channel() { | ||
| + | CHANNEL=`echo $1 | sed 's/^0*\([0-9]\+\)$/\1/'` | ||
| + | if [ $CHANNEL -ge 1 -a $CHANNEL -le 69 ] 2> /dev/null ; then | ||
| + | echo "Turning to Channel $CHANNEL" | ||
| + | send $(($CHANNEL/10)) $(($CHANNEL%10)) | ||
| + | else | ||
| + | echo "ERROR: Channel must be an integer between 1 and 69 inclusive" | ||
| + | fi | ||
| + | } | ||
| + | direction() { | ||
| + | DIRECTION=`echo $1 | sed 's/^0*\([0-9]\+\)$/\1/'` | ||
| + | if [ $DIRECTION -ge 0 -a $DIRECTION -le 360 ] 2> /dev/null ; then | ||
| + | echo "Turning to $DIRECTION Degrees" | ||
| + | send $(($DIRECTION/100)) $((DIRECTION%100/10)) $(($DIRECTION%10)) | ||
| + | else | ||
| + | echo "ERROR: Direction must be an integer between 0 and 360 inclusive" | ||
| + | fi | ||
| + | } | ||
| + | up() { | ||
| + | echo "Beginning clockwise rotation, Press enter to stop" | ||
| + | send | ||
| + | /usr/local/bin/irsend SEND_START rotor up | ||
| + | read | ||
| + | /usr/local/bin/irsend SEND_STOP rotor up | ||
| + | } | ||
| + | down() { | ||
| + | echo "Beginning counter-clockwise rotation, Press enter to stop" | ||
| + | send | ||
| + | /usr/local/bin/irsend SEND_START rotor down | ||
| + | read | ||
| + | /usr/local/bin/irsend SEND_STOP rotor down | ||
| + | } | ||
| + | sync() { | ||
| + | echo "Synchronizing Antenna" | ||
| + | send 0 0 down | ||
| + | } | ||
| + | status() { | ||
| + | echo Displaying Status on Controller | ||
| + | send 9 9 up | ||
| + | } | ||
| + | power() { | ||
| + | echo Toggling unit power | ||
| + | /usr/local/bin/irsend SEND_ONCE rotor power | ||
| + | } | ||
| + | on() { | ||
| + | echo Powering unit on | ||
| + | send | ||
| + | } | ||
| + | off() { | ||
| + | echo Powering unit off | ||
| + | /usr/local/bin/irsend SEND_ONCE rotor noop power | ||
| + | } | ||
| + | reset() { | ||
| + | echo "Are you sure you want to delete all memories and reset the controller? | ||
| + | Type Yes if you are sure." | ||
| + | read RESET | ||
| + | if [ "$RESET" = "Yes" ]; then | ||
| + | echo "Resetting controller!" | ||
| + | send 9 1 down | ||
| + | else | ||
| + | echo "NOT resetting controller" | ||
| + | fi | ||
| + | } | ||
| + | autosync() { | ||
| + | case $1 in | ||
| + | on) | ||
| + | echo "Turning on/resetting autosync" | ||
| + | send 9 8 up | ||
| + | ;; | ||
| + | off) | ||
| + | echo "Turning off autosync" | ||
| + | send 9 8 down | ||
| + | ;; | ||
| + | *) usage;; | ||
| + | esac | ||
| + | } | ||
| + | timeout() { | ||
| + | case $1 in | ||
| + | on) | ||
| + | echo "Turning on 8 minute timeout" | ||
| + | send 9 7 up | ||
| + | ;; | ||
| + | off) | ||
| + | echo "Turning off timeout" | ||
| + | send 9 7 down | ||
| + | ;; | ||
| + | *) usage;; | ||
| + | esac | ||
| + | } | ||
| + | program() { | ||
| + | CHANNEL=`echo $1 | sed 's/^0*\([0-9]\+\)$/\1/'` | ||
| + | if [ $CHANNEL -ge 1 -a $CHANNEL -le 69 ]; then | ||
| + | echo "Programming Channel $CHANNEL" | ||
| + | send $(($CHANNEL/10)) $(($CHANNEL%10)) up $(($CHANNEL/10)) $(($CHANNEL%10)) | ||
| + | else | ||
| + | echo "ERROR: Channel must be an integer between 1 and 69 inclusive" | ||
| + | fi | ||
| + | } | ||
| + | case $# in | ||
| + | 1) case $1 in | ||
| + | -s) sync;; | ||
| + | --up) up;; | ||
| + | --down) down;; | ||
| + | --status) status;; | ||
| + | --power) power;; | ||
| + | --on) on;; | ||
| + | --off) off;; | ||
| + | --reset) reset;; | ||
| + | *) usage;; | ||
| + | esac;; | ||
| + | 2) case $1 in | ||
| + | -c) channel $2;; | ||
| + | -d) direction $2;; | ||
| + | -p) program $2;; | ||
| + | -a) autosync $2;; | ||
| + | -t) timeout $2;; | ||
| + | *) usage;; | ||
| + | esac;; | ||
| + | *) usage;; | ||
| + | esac | ||
Latest revision as of 09:44, 22 January 2015
Hardware
Asus M4A77TD motherboard AMD Phenom II X4 965 Processor nVidia Corporation NV44 [GeForce 6200 TurboCache Hauppaupe HVR-950 Hauppauge 150 Hauppauge 500 Pinnacle Systems, Inc. Remote Kit Infrared Transceiver
Standard Files
Because these files are spread out everywhere, I usually get a mismatched set :-(
/etc/my.cnf [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 key_buffer = 16M table_cache = 128 sort_buffer_size = 2M myisam_sort_buffer_size = 8M query_cache_size = 16M [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid
/etc/lirc/lircd.conf # # # contributed by Andrew Allison # # brand: PCTV (Hauppauge) USB MCE Remote # model no. of remote control: RRS9002-8601FC # devices being controlled by this remote: Pinnacle IR Receiver / Blaster #
begin remote
name pctv.usb.remote
bits 13
flags RC6|CONST_LENGTH
eps 30
aeps 100
header 2694 840
one 471 413
zero 471 413
pre_data_bits 24
pre_data 0x1BFF83
gap 105342
min_repeat 2
# suppress_repeat 2
# uncomment to suppress unwanted repeats
toggle_bit_mask 0x8000
rc6_mask 0x100000000
begin codes
KEY_POWER 0x13
KEY_PAUSE 0x037FF07BE7
KEY_RECORD 0x037FF07BE8
KEY_STOP 0x037FF07BE6
KEY_REWIND 0x037FF07BEA
KEY_PLAY 0x037FF07BE9
KEY_FORWARD 0x037FF07BEB
KEY_FRAMEBACK 0x037FF07BE4
KEY_FRAMEFORWARD 0x037FF07BE5
KEY_BACK 0x1BDC
KEY_INFO 0x1BF0
KEY_LEFT 0x1BDF
KEY_RIGHT 0x1BDE
KEY_OK 0x037FF07BDD
KEY_UP 0x1BE1
KEY_DOWN 0x1BE0
KEY_VOLUMEUP 0x037FF07BEF
KEY_VOLUMEDOWN 0x037FF07BEE
KEY_RESSTART 0x1BF2
KEY_CHANNELDOWN 0x037FF07BEC
KEY_CHANNELUP 0x037FF07BED
KEY_MUTE 0x1BF1
KEY_SWITCHVIDEOMODE 0x1BB7
KEY_EPG 0x1BD9
KEY_TV 0x1BDA
KEY_VIDEO 0x1BDB
KEY_1 0x1BFE
KEY_2 0x1BFD
KEY_3 0x1BFC
KEY_4 0x1BFB
KEY_5 0x1BFA
KEY_6 0x1BF9
KEY_7 0x1BF8
KEY_8 0x1BF7
KEY_9 0x1BF6
KEY_0 0x1BFF
KEY_CLEAR 0x037FF07BF5
KEY_ENTER 0x037FF07BF4
KEY_RED 0x037FF07BA4
KEY_GREEN 0x037FF07BA3
KEY_YELLOW 0x037FF07BA2
KEY_BLUE 0x037FF07BA1
KEY_NUMERIC_STAR 0x037FF07BE2
KEY_NUMERIC_POUND 0x037FF07BE3
KEY_SUBTITLE 0x037FF07BA5
end codes
end remote
/home/mythtv/.lircrc
# lircrc config file for the Microsoft Media Center Edition Remote, model 1039 # # @url $URL$ # @date $Date: 2008-03-08 23:30:22 -0500 (Sat, 08 Mar 2008) $ # @version $Revision: 16474 $ # @author $Author: kormoc $ # # This file is intended to complement the lircd.conf.mceusb file included with # lirc 0.8 and above. # # Save this file in ~/.mythtv/lircrc # # You will also need to make a few changes to the MythTV key bindings and jump # points as follows. # # Jump Points: # # TV Recording Playback: Alt+R # Program Guide: Alt+G # Live TV: Alt+P # MythVideo -> The MythVideo default view: Alt+V # Main Menu: Alt+Home # # Key Bindings: # # TV Playback -> CHANNELDOWN: Down,PgDown # TV Playback -> CHANNELUP: Up,PgUp # TV Playback -> JUMPRWND: Shift+PgUp # TV Playback -> JUMPFFWD: Shift+PgDown #
#
# Program Navigation
#
#
begin
prog = mythtv
button = Home
config = Alt+Home
repeat = 2
end
begin
prog = mythtv
button = RecTV
config = Alt+R
repeat = 2
end
begin
prog = mythtv
button = KEY_EPG
config = Alt+G
repeat = 2
end
begin
prog = mythtv
button = KEY_TV
config = Alt+P
repeat = 2
end
begin
prog = mythtv
button = KEY_VIDEO
config = Alt+V
repeat = 2
end
#
# Menu Navigation
#
begin
prog = mythtv
button = KEY_BACK
config = Esc
repeat = 2
end
begin
prog = mythtv
button = KEY_OK
config = Space
repeat = 2
end
begin
prog = mythtv
button = More
config = I
repeat = 2
end
begin
prog = mythtv
button = KEY_LEFT
config = Left
repeat = 2
end
begin
prog = mythtv
button = KEY_RIGHT
config = Right
repeat = 2
end
begin
prog = mythtv
button = KEY_UP
config = Up
repeat = 2
end
begin
prog = mythtv
button = KEY_DOWN
config = Down
repeat = 2
end
# TV Control
#
begin
prog = mythtv
button = KEY_VOLUMEDOWN
config = F10
repeat = 2
end
begin
prog = mythtv
button = KEY_VOLUMEUP
config = F11
repeat = 2
end
begin
prog = mythtv
button = KEY_MUTE
config = F9
repeat = 2
end
begin
prog = mythtv
button = KEY_CHANNELDOWN
config = PgDown
repeat = 2
end
begin
prog = mythtv
button = KEY_CHANNELUP
config = PgUp
repeat = 2
end
#
# Video Navigation
#
begin
prog = mythtv
button = KEY_PLAY
config = P
repeat = 2
end
begin
prog = mythtv
button = KEY_PAUSE
config = P
repeat = 2
end
begin
prog = mythtv
button = KEY_STOP
config = Esc
repeat = 2
end
begin
prog = mythtv
button = KEY_FORWARD
config = >
repeat = 2
end
begin
prog = mythtv
button = KEY_REWIND
config = <
repeat = 2
end
begin
prog = mythtv
button = KEY_FRAMEBACK
config = Q
repeat = 2
end
begin
prog = mythtv
button = KEY_FRAMEFORWARD
config = Z
repeat = 2
end
begin
prog = mythtv
button = KEY_RECORD
config = R
repeat = 2
end
#
#
# Miscellaneous
#
#
# M for Menu
begin
prog = mythtv
button = KEY_INFO
config = M
repeat = 2
end
begin
prog = mythtv
button = Hash
config = M
repeat = 2
end
begin
prog = mythtv
button = KEY_CLEAR
config = Esc
repeat = 2
end
#begin
# prog = mythtv
# button = Enter
# config = Space
#end
#
# Numbers
#
begin
prog = mythtv
button = KEY_0
config = 0
repeat = 2
end
begin
prog = mythtv
button = KEY_1
config = 1
repeat = 2
end
begin
prog = mythtv
button = KEY_2
config = 2
repeat = 2
end
begin
prog = mythtv
button = KEY_3
config = 3
repeat = 2
end
begin
prog = mythtv
button = KEY_4
config = 4
repeat = 2
end
begin
prog = mythtv
button = KEY_5
config = 5
repeat = 2
end
begin
prog = mythtv
button = KEY_6
config = 6
repeat = 2
end
begin
prog = mythtv
button = KEY_7
config = 7
repeat = 2
end
begin
prog = mythtv
button = KEY_8
config = 8
repeat = 2
end
begin
prog = mythtv
button = KEY_9
config = 9
repeat = 2
end
begin
remote = pctv.usb.remote
prog = irexec
button = KEY_BLUE
config = /home/mythtv/start_myth.sh &
repeat = 0
delay = 0
end
My Backup script
date= date -I nice -n 19 mysqldump -u --password= --extended-insert --no-create-db --add-drop-table --database mythconverg > `date -I`_myth_backup_data.sql nice -n 19 mysqldump -u --password= --extended-insert --database mythconverg > `date -I`_myth_complete_backup_data.sql nice -n 19 gzip `date -I`_myth_backup_data.sql nice -n 19 gzip `date -I`_myth_complete_backup_data.sql chmod 777 `date -I`_myth_backup_data.sql.gz chmod 777 `date -I`_myth_complete_backup_data.sql.gz mv `date -I`_myth_backup_data.sql.gz /storage1/Database/ mv `date -I`_myth_complete_backup_data.sql.gz /storage1/Database/
My Restore
mysql -u root -p < myth_complete_backup_data.sql
Setting Atrpms.repo
[atrpms] name=Fedora Core $releasever - $basearch - ATrpms baseurl=http://dl.atrpms.net/f$releasever-$basearch/atrpms/stable gpgkey=http://ATrpms.net/RPM-GPG-KEY.atrpms enabled=1 gpgcheck=1
Setting up Autologin
/etc/gdm/custom # GDM configuration storage [daemon] TimedLoginEnable=true TimedLogin=mythtv TimedLoginDelay=5 [security] [xdmcp] [greeter] [chooser] [debug]
Crontab
MAILTO="andrew.allison@gmail.com" #min hour day month Sun=0 Sat=6 1 3 * * * /home/mythtv/backup-mysql.sh 1 4 1 * * /home/mythtv/optimize-myth-db.sh 1 1 16 * * /storage2/mirror-canvec.sh
/etc/rc.local
#!/bin/sh mount /dev/sdc1 /storage1 mount /dev/sdd1 /storage2 mount /dev/sdb1 /storage3 modprobe -r ir_rc6_decoder modprobe -r rc_rc6_mce modprobe -r ir_rc5_decoder echo lirc > /sys/class/rc/rc0/protocols #command v4l2-ctl -d /dev/video3 --list-ctrl v4l2-ctl -d /dev/video3 --set-ctrl volume=24 /bin/mythbackend --daemon --loglevel info /bin/mythjobqueue --daemon --loglevel info
Mythtv->Setup-General
LIRC daemon socket /var/run/lirc/lircd
Notes on Fedora 15 Install
Section "Device"
Identifier "Videocard0"
Driver "nouveau"
EndSection
Section "Monitor"
Identifier "TV"
HorizSync 30-50
VertRefresh 60.0
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "TV"
DefaultDepth 24
EndSection
Screen Lockup / Shuddering Video
Add to grub boot the system with the noapic kernel parameter. nouveau.tv_norm=NTSC-M noapic
Using the default nouveau video driver GeForce 6200 SVideo
Add boot option to grub.conf nouveau.tv_norm=NTSC-M
kernel /vmlinuz-2.6.40.6-0.fc15.x86_64 ro root=UUID=4b78f456-a78b-4f2b-b4b6-392bd5a2b215 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us nouveau.tv_norm=NTSC-M quiet initrd /initramfs-2.6.40.6-0.fc15.x86_64.img
Installing MS Core Fonts
yum install rpm-build cabextract ttmkfdir wget wget http://corefonts.sourceforge.net/msttcorefonts-2.0-1.spec rpmbuild -ba msttcorefonts-2.0-1.spec yum install --nogpgcheck /root/rpmbuild/RPMS/noarch/msttcorefonts-2.0-1.noarch.rpm
Useful Links
http://blog.grantgoodyear.org/2010_05_01_archive.html
Notes
Crash in MythNews 2012-01-01 10:26:35.859302 I MythUIWebBrowser: Loading css from - file:///usr/local/share/mythtv/themes/default/htmls/mythbrowser.css 2012-01-01 10:26:35.866052 I MythUIWebBrowser: enabling plugins ** (process:7422): DEBUG: NP_Initialize ** (process:7422): DEBUG: NP_Initialize succeeded ** (process:7422): DEBUG: NP_Initialize ** (process:7422): DEBUG: NP_Initialize succeeded /builddir/build/BUILD/icedtea-web-1.0.6/plugin/icedteanp/IcedTeaNPPlugin.cc:2016: thread 0x2793a60: Error: Invalid plugin function table. ** (<unknown>:7422): DEBUG: NP_Initialize ** (<unknown>:7422): DEBUG: NP_Initialize succeeded ** (<unknown>:7422): DEBUG: NP_Initialize ** (<unknown>:7422): DEBUG: NP_Initialize succeeded
Solution Remove all files in .mythtv/MythNews
SQL Profiling script
Please remember to put the password for your admin user at the point marked XXX.
The script waits for the SQL load to get over 75% then starts to dump
a file called sqlload'timestamp' to your Desktop, it stops when the
load falls back below 75%.
If a few users could run it for testing it would be useful, it ONLY
starts to dump when load is > 75%
#!/bin/sh
FILENOW=`date +%a"."%b%d"."%H":"%M":"%S`
COUNT="0"
cd ~/Desktop
LOADOUTPUT="sqlload@""$FILENOW"
touch "$LOADOUTPUT"
SQLLOAD="0"
while [ "$SQLLOAD" -le 75 ] ; do
SQLLOAD=`top -b -n 1 | grep mysqld | awk -F " " '{ print $9 }'`
done;
while [ "$SQLLOAD" -ge 75 ]; do
mysql -uroot -pXXXADDYOURPASSWORDHEREXXX -e"SHOW full processlist;" >>
"$LOADOUTPUT"
NEWNOW=`date +%a"."%b%d"."%H":"%M":"%S`
echo -e "**************\n\n\n$NEWNOW\n\n\n Next Pass" >> "$LOADOUTPUT"
COUNT=`echo "$COUNT + 1" | bc`
echo "Count $COUNT sqlload $SQLLOAD"
sleep 1
SQLLOAD=`top -b -n 1 | grep mysqld | awk -F " " '{ print $9 }'`
done
echo "Glitch finished at $NEWNOW, end of Run" >> "$LOADOUTPUT"
_______________________________________________
UDEV
KERNEL=="video[0-9]", DRIVERS=="ivtv", ATTRS{subsystem_device}=="0x8801", SYMLINK+="PVR150-0"
KERNEL=="video[0-9]", DRIVERS=="ivtv", ATTRS{subsystem_device}=="0xe807", SYMLINK+="PVR150-1"
KERNEL=="video[0-9]", DRIVERS=="ivtv", ATTRS{subsystem_device}=="0xe817", SYMLINK+="PVR150-2"
DRIVERS=="em28xx", SYMLINK+="HVR950-0"
#KERNEL=="dvb0.frontend0", DRIVERS=="em28xx", SYMLINK+="HVR950-0"
#KERNEL=="video[0-9]", DRIVERS=="cx18", SYMLINK+="HVR1600-1"
#KERNEL=="video[0-9]*", DRIVERS=="cx18", ATTRS{subsystem_device}=="0x8389", SYMLINK+="HVR1600-1"
Fedora 16 Service Configuration
chkconfig --list
systemctl enable mysqld.service systemctl enable mythbackend.service systemctl enable mythjobqueue.service
ssmtp
Fedora 19 requires the TLS_CA_File option
root=email address MailHub=smtp.gmail.com:587 AuthUser=email address AuthPass=password UseSTARTTLS=YES UseTLS=YES FromLineOverride=YES TLS_CA_File=/etc/pki/tls/certs/ca-bundle.crt
Note about HVR2250 from mailing list
The modules for the HVR-2250 card work properly only when loaded in the
correct stack order. Unfortunately, due to some weird set of conditions,
that does not happen. I had some recordings where the sound is very
'muddy' and muffled. I have not had that since I started forcing the
correct load order: that is, *I* do it, by a script.
One weird bit is that you have to 'unstack' the modules in the correct
(wrong) order.
Here is the chunk of script from my rc.local file which gets called at
the end of bootup.
# These steps are required to install the modules in the correct order
modprobe -r tda18271
modprobe -r s5h1411
modprobe -r saa7164
modprobe -r s5h1411
modprobe -r tda18271
modprobe -r s5h1411
echo " Ignore FATAL error messages above if next lines are empty"
lsmod | grep tad18271
lsmod | grep s5h1411
lsmod | grep saa7164
echo " No output means modules were properly unloaded"
modprobe tda18271
modprobe s5h1411
modprobe saa7164
echo " Modules re-loaded in proper order"
The *ANALOG* module is the saa7164 and must be last.
THEN and only THEN, you can restart myth.
So the script kills any existing myth programs, and restarts the service:
result=`ps -ae | grep mythbackend`
out=`echo $result | awk '{ print $4}'`
if [ "$out" = "mythbackend" ] ; then
killall mythbackend
killall mythlogserver
killall mythcommflag
killall mythfrontend
rm -f /run/mythtv/backend.pid
echo "Killed existing processes"
# echo "Now ready to start mythbackend, with
/lib/systemd/system/mythbackend.service;"
fi
#/usr/bin/systemctl status mysqld.service
/usr/bin/systemctl start mythbackend.service
/usr/bin/systemctl status mythbackend.service
Geoff
Antenna Rotor Script
I use this rotor controller with my Tivo, and I've created an lircd.conf file for this. I guess I never sent it in. It's attached. irrecord did afairly good job, but I looked up the specs for the chip and made the values accurate. I also added a command called noop which does nothing, but will turn it on if it isn't. It acts as a discrete on. I also wrote a bash script, attached which can take advantage of every function the controller is capable of. for example rotor -c 22 turns to the direction stored for channel 22. Hopefully it all makes sense. If you have questions or modifications to the script, I'd be very interested in them. Best of luck with your project. I had a lot of fun with mine. Hope I didn't do too much of it for you already. Joel Ebel potuncle-+T8c/Xf75frU2QLv0tUyrdBPR1lH4CV8@xxxxxxxxxxxxxxxx wrote: I am hoping to use the following IR remote controlled antenna rotor with MythTV: http://www.starkelectronic.com/cmmatv.htm (first item on the page). My goal will be for MythTV to, via LIRC, send an IR command to the rotor controller whenever the channel is changed so that the antenna points in the direction optimal for that channel. Expectedly, I do not see an existing lircd.conf for this remote, so I assume I have to create one myself. Has anybody used LIRC with this rotor controller? If so, it would be great if I could get a copy of your lircd.conf so I only have to build an IR receiver for my computer. Also, if I have to create my own lircd.conf, what are my chances of irrecord sucessfully creating one for me? I don't mean to sound like a n00b, but I have not tinkered with LIRC much in the past. Thanks, Jason pl # Please make this file available to others # by sending it to <lirc-yJlpgWQrpSkOIzVOb1FTxg@xxxxxxxxxxxxxxxx> # # this config file was automatically generated # using lirc-0.6.6(serial) on Sat Oct 25 10:20:22 2003 # # contributed by Joel Ebel # # brand: Channel Master # model no. of remote control: 9537 # devices being controlled by this remote: # Bundled with Channel Master 9521A Antenna Rotor # Compatible with many other Channel Master rotators # 9500, 9510(A), 9512, 9513, 9515(A), Radio Shack 15-1225 # begin remote name Channel_Master_9537 bits 32 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 header 9000 4500 one 563 1688 zero 563 563 ptrail 563 repeat 9000 2250 gap 108000 toggle_bit 0 duty_cycle 33 frequency 38000 begin codes POWER 0x0000000035CA38C7 UP 0x0000000035CA08F7 DOWN 0x0000000035CA8877 1 0x0000000035CA807F 2 0x0000000035CA40BF 3 0x0000000035CAC03F 4 0x0000000035CA20DF 5 0x0000000035CAA05F 6 0x0000000035CA609F 7 0x0000000035CAE01F 8 0x0000000035CA10EF 9 0x0000000035CA906F 0 0x0000000035CA00FF noop 0x0000000035CA18E7 # This last code is not on the remote, but it can be sent to the # controller to turn it on. However, if it is on, it will not # turn it off. I send this before sending other commands to # ensure the controller is on. # end codes end remote #!/bin/bash usage() { echo "usage: $0 [OPTION] -c channel Turn to specified channel -d direction Turn to specified direction --up Rotate clockwise --down Rotate counter-clockwise -s Synchronize antenna -p channel Program channel to current direction --power Toggle power --on Turn controller on --off Turn controller off --status Display status on controller -a [on off] Turn autosync on(reset) or off -t [on off] Turn 8 minute timeout on or off --reset Delete all memories and reset controller " } send() { /usr/local/bin/irsend SEND_ONCE rotor noop $1 noop $2 noop $3 noop $4 noop $5 echo noop $1 noop $2 noop $3 noop $4 noop $5 } channel() { CHANNEL=`echo $1 | sed 's/^0*\([0-9]\+\)$/\1/'` if [ $CHANNEL -ge 1 -a $CHANNEL -le 69 ] 2> /dev/null ; then echo "Turning to Channel $CHANNEL" send $(($CHANNEL/10)) $(($CHANNEL%10)) else echo "ERROR: Channel must be an integer between 1 and 69 inclusive" fi } direction() { DIRECTION=`echo $1 | sed 's/^0*\([0-9]\+\)$/\1/'` if [ $DIRECTION -ge 0 -a $DIRECTION -le 360 ] 2> /dev/null ; then echo "Turning to $DIRECTION Degrees" send $(($DIRECTION/100)) $((DIRECTION%100/10)) $(($DIRECTION%10)) else echo "ERROR: Direction must be an integer between 0 and 360 inclusive" fi } up() { echo "Beginning clockwise rotation, Press enter to stop" send /usr/local/bin/irsend SEND_START rotor up read /usr/local/bin/irsend SEND_STOP rotor up } down() { echo "Beginning counter-clockwise rotation, Press enter to stop" send /usr/local/bin/irsend SEND_START rotor down read /usr/local/bin/irsend SEND_STOP rotor down } sync() { echo "Synchronizing Antenna" send 0 0 down } status() { echo Displaying Status on Controller send 9 9 up } power() { echo Toggling unit power /usr/local/bin/irsend SEND_ONCE rotor power } on() { echo Powering unit on send } off() { echo Powering unit off /usr/local/bin/irsend SEND_ONCE rotor noop power } reset() { echo "Are you sure you want to delete all memories and reset the controller? Type Yes if you are sure." read RESET if [ "$RESET" = "Yes" ]; then echo "Resetting controller!" send 9 1 down else echo "NOT resetting controller" fi } autosync() { case $1 in on) echo "Turning on/resetting autosync" send 9 8 up ;; off) echo "Turning off autosync" send 9 8 down ;; *) usage;; esac } timeout() { case $1 in on) echo "Turning on 8 minute timeout" send 9 7 up ;; off) echo "Turning off timeout" send 9 7 down ;; *) usage;; esac } program() { CHANNEL=`echo $1 | sed 's/^0*\([0-9]\+\)$/\1/'` if [ $CHANNEL -ge 1 -a $CHANNEL -le 69 ]; then echo "Programming Channel $CHANNEL" send $(($CHANNEL/10)) $(($CHANNEL%10)) up $(($CHANNEL/10)) $(($CHANNEL%10)) else echo "ERROR: Channel must be an integer between 1 and 69 inclusive" fi } case $# in 1) case $1 in -s) sync;; --up) up;; --down) down;; --status) status;; --power) power;; --on) on;; --off) off;; --reset) reset;; *) usage;; esac;; 2) case $1 in -c) channel $2;; -d) direction $2;; -p) program $2;; -a) autosync $2;; -t) timeout $2;; *) usage;; esac;; *) usage;; esac
