User:DirkGecko

From MythTV Official Wiki
Revision as of 17:08, 14 March 2008 by DirkGecko (talk | contribs) (Updated gear list)

Jump to: navigation, search

Gear

I use Gentoo Linux as my OS of choice. I've tried them all though (Slack, RH, FC, SUSE, Deb, you name it) and I do appreciate the "just works-ness" of Ubuntu. But I prefer to admin a Gentoo box. Just don't forget to enable DMA like I did. Couldn't figure out my DVD skippage. Turns out it's not started "by default" on a Gentoo box. ;-)


Master Backend / Frontend:

  • STATUS: 95% complete. Proper HD channel listings are still oustanding.
  • Primary duty: This is the most heavily used machine in the setup, not just as a backend. It spends more time front-ending than the other machines combined ever will.
  • MythTV 0.20.2_p14xxx (gentoo ebuild). Will be upgrading to .21 around the end of the month once the Gentoo ebuilds smooth out a tick.
  • AMD X2 4800+ Brisbane
  • ASUS M2NBP-VM CSM (highly recommend, uber stable, has 4 SATA & 2 IDE channels)
  • 2GB PC6400 (1GB x 2)
  • MSI nvidia GeForge 7300LE
  • (2) 250GB Maxtor IDE drives in RAID 1 (OS, home dirs, etc)
  • (4) 400GB Samsung SATA drives in RAID 5 w/ LVM (recordings, media storage). 200GB unallocated yet for a rainy day.
  • CoolerMaster 4-in-3 drive cage (highly recommend for greater storage density. cool drives live much longer, too)
  • Plextor IDE DVD burner
  • PVR-500
  • HD HomeRun (tried QAM, it sucked, tried ATSC, went back to QAM for now)
  • MCE2 USB receiver & remote
  • Custom VGA-over-ethernet wiring from basement office to HP Plasma upstairs


Bedroom Frontend:

  • STATUS: 80% complete.
  • Primary duty: This machine will spend most of its time doing MythVideo, with occasional MythGame action when there's a hankering for some old-skool NES action.
  • MythTV 0.20.2_p14xxx (gentoo ebuild).
  • EPIA EX15000G w/ SVN OpenChrome, plays back SD-res MPEG-2 & MPEG-4 w/o XvMC. HD & H264? Yaright.
  • 512MB RAM
  • 60GB laptop HD (it's what was in my parts bin). The standard IDE drive was getting WAY too hot in the Silverstone case.
  • Dynex PCI wifi card. Madwifi compliant. Got it on closeout for $20! I bought two. Yaay! Encryption set up!
  • Silverstone LC02 profile case
  • MCE2 USB receiver & remote
  • Twin Logitech Precision 2 gamepads. I like 'em, wife complains they're not square with red buttons. Tough.
  • Connected via VGA to Toshiba 20HLV86


Home Theater Frontend:

  • STATUS: 25% complete. It's really just a case with a motherboard screwed into it. One of the two RAM sticks I ordered was bad; waiting on a new one.
  • Primary duty: Upscaling & enhancing DVD content as it's connected to the home theater. Also MythGaming NES, SNES & PSX.
  • AMD X2 4800+ Brisbane
  • ASUS M2A-VM AMD690G. Would have gotten the same mobo as in my BE, but that one is discontinued. First time with AMD-chipped mobo, we'll see how it goes.
  • 512MB DDR2 667 (I hope this won't be a bottleneck, but I'll try some encoding tests to compare it to the master BE)
  • PNY GeForce 8300GT. Active cooling. If the noise is too much in the AV rack, I'll swap with the BE video card.
  • 160GB Samsung SATA (again, overkill, but it was in the parts bin)
  • Sony DVD drive
  • Athenatech HTPC case. Very desktoppy, but seems to suck less than I expected.
  • SB Live w/ SPDIF daughterboard connected to Yamaha HTR-5960
  • MCE2 USB receiver & remote. Controls volume directly on Yammy, so no software volume concerns with the SPDIF.
  • Same Logitech game pads as above. Hooray for the ubiquity of front-mounted USB ports.
  • Connected via DVI->HDMI cable to Samsung DLP HL-S5086W. Or maybe component. Haven't decided.


Office dev box

  • STATUS: 50% complete.
  • Primary duty: No real rush on this one. Has mainly been a testbed and still dual-boots XP. Some time this winter I'll scrape it all back together.
  • AMD XP 2400 (2.0Ghz clock)
  • 1GB RAM
  • 250GB WD IDE
  • Some ancient half-dead ASUS NF2 mobo
  • Chaintech GF 5900XT
  • SB Audigy 2
  • USB Keyboard
  • BT878-based tuner