Difference between revisions of "User:Lisch"

From MythTV Official Wiki
Jump to: navigation, search
Line 4: Line 4:
[[Intel DG965OT]]<br>
[[Intel DG965OT]]<br>
Intel Core 2 Duo E4500<br>
Intel Core 2 Duo E4500<br>
1GB RAM<br>
1GB RAM (2 &times; 512MB dual channel)<br>
Asus SVDO card<br>
Asus SVDO card (DVI-D)<br>
Seagate 160GB drive<br>
Seagate 160GB SATA II drive<br>
Samsung DVD drive<br>
Samsung DVD SATA drive<br>
iMon VFD/IR<br>
iMon VFD/IR<br>
Opensuse 10.3<br>
Opensuse 10.3<br>

Revision as of 16:54, 30 December 2007

I'm working on a new front end:

Antec NSK2480
Intel DG965OT
Intel Core 2 Duo E4500
1GB RAM (2 × 512MB dual channel)
Asus SVDO card (DVI-D)
Seagate 160GB SATA II drive
Samsung DVD SATA drive
Opensuse 10.3

The Intel DG965OT mainboard has integrated video and audio. The only video port, however, is VGA. The add-on Asus SVDO card occupies the 16x PCI-Express slot and provides a DVI-D connector. Currently, we have a small LCD monitor hooked up to the DVI connector while we decide which HDTV we want. Most likely, we will need to use a DVI->HDMI cable to hook up the television.

The NSK2480 case comes with two 12cm fans. I removed one and blocked the hole (with the cover that Antec provides). I set the remaining fan on low. I'm using a Zalman AlCu7000 cooler, with the fan set on low.

Although the disk noise is loud when it seeks, it does that only when I'm installing software. In ordinary use (that is, watching a recording, video, or DVD), the disk is mostly inactive and silent. The case fan is a little louder than I'd like. I intend to replace it with a quieter fan.

I installed Opensuse 10.3 without any problems. It recognized and setup the video, audio, and gigabit Ethernet.

I'm using lirc unmodified from the Opensuse 10.3 distribution, but I had to download and install LCDproc manually. I built it from sources, but I believe an RPM is available from one of the Opensuse repositories.

I've been working on my own lircrc that meets our needs.

This has been a remarkably easy system to build. The Intel integrated video works well, although it doesn't always powerdown, even though DPMS is enabled. I configured a button on the remote to force DPMS on or off to work around this problem.