Difference between revisions of "User:Sdkovacs"

From MythTV Official Wiki
Jump to: navigation, search
(My Setup on Fedora 8)
(Xorg)
Line 18: Line 18:
 
===Xorg===
 
===Xorg===
  
 
+
I recently moved to an 8400GS. The xorg.conf will be posted when I get a chance.
<pre>
 
# XFree86 4 configuration created by pyxf86config
 
 
 
Section "ServerLayout"
 
        Identifier    "Default Layout"
 
        Screen      0  "Screen0" 0 0
 
        InputDevice    "Mouse0" "CorePointer"
 
        InputDevice    "Keyboard0" "CoreKeyboard"
 
EndSection
 
 
 
Section "Files"
 
 
 
# RgbPath is the location of the RGB database.  Note, this is the name of the
 
# file minus the extension (like ".txt" or ".db").  There is normally
 
# no need to change the default.
 
# Multiple FontPath entries are allowed (they are concatenated together)
 
# By default, Red Hat 6.0 and later now use a font server independent of
 
# the X server to render fonts.
 
 
 
#        ModulePath  "/usr/lib/xorg/modules/extensions/nvidia"
 
#        ModulePath  "/usr/lib/xorg/modules/extensions"
 
#        ModulePath  "/usr/lib/xorg/modules"
 
#        FontPath    "unix/:7100"
 
EndSection
 
 
 
Section "Module"
 
        Load  "dbe"
 
        Load  "extmod"
 
        Load  "fbdevhw"
 
        Load  "glx"
 
        Load  "record"
 
        Load  "freetype"
 
        Load  "type1"
 
        Load  "vnc"
 
EndSection
 
 
 
Section "InputDevice"
 
 
 
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
 
#      Option  "Xleds"        "1 2 3"
 
# To disable the XKEYBOARD extension, uncomment XkbDisable.
 
#      Option  "XkbDisable"
 
# To customise the XKB settings to suit your keyboard, modify the
 
# lines below (which are the defaults).  For example, for a non-U.S.
 
# keyboard, you will probably want to use:
 
#      Option  "XkbModel"      "pc102"
 
# If you have a US Microsoft Natural keyboard, you can use:
 
#      Option  "XkbModel"      "microsoft"
 
#
 
# Then to change the language, change the Layout setting.
 
# For example, a german layout can be obtained with:
 
#      Option  "XkbLayout"    "de"
 
# or:
 
#      Option  "XkbLayout"    "de"
 
#      Option  "XkbVariant"    "nodeadkeys"
 
#
 
# If you'd like to switch the positions of your capslock and
 
# control keys, use:
 
#      Option  "XkbOptions"    "ctrl:swapcaps"
 
# Or if you just want both to be control, use:
 
#      Option  "XkbOptions"    "ctrl:nocaps"
 
#
 
        Identifier  "Keyboard0"
 
Driver      "kbd"
 
        Option      "XkbModel" "pc105"
 
        Option      "XkbLayout" "us"
 
EndSection
 
 
 
Section "InputDevice"
 
        Identifier  "Mouse0"
 
        Driver      "mouse"
 
        Option      "Protocol" "IMPS/2"
 
        Option      "Device" "/dev/input/mice"
 
        Option      "ZAxisMapping" "4 5"
 
        Option      "Emulate3Buttons" "no"
 
EndSection
 
 
 
Section "InputDevice"
 
 
 
# If the normal CorePointer mouse is not a USB mouse then
 
# this input device can be used in AlwaysCore mode to let you
 
# also use USB mice at the same time.
 
        Identifier  "DevInputMice"
 
        Driver      "mouse"
 
        Option      "Protocol" "IMPS/2"
 
        Option      "Device" "/dev/input/mice"
 
        Option      "ZAxisMapping" "4 5"
 
        Option      "Emulate3Buttons" "no"
 
EndSection
 
 
 
Section "Monitor"
 
        Identifier  "NTSC Monitor"
 
        HorizSync  30-68
 
        VertRefresh 50-120
 
        Mode "720x480"
 
          # D: 34.563 MHz, H: 37.244 kHz, V: 73.897 Hz
 
          DotClock 34.564
 
          HTimings 720 752 840 928
 
          VTimings 480 484 488 504
 
          Flags    "-HSync" "-VSync"
 
      EndMode
 
EndSection
 
 
 
Section "Device"
 
        Identifier  "Hauppauge PVR 350 iTVC15 Framebuffer"
 
        Driver      "ivtv"
 
 
 
        ### change fb1 to whatever your card grabbed
 
        Option      "fbdev" "/dev/fb1"
 
        Option      "ivtv" "/dev/fb1"
 
 
 
        ### change the BusID to whatever is reported by lspci,
 
        ### converted from hex to decimal
 
        BusID "PCI:2:10:0" # lspci says 02:0a.0
 
        #BusID "PCI:0:8:0" # lspci says 00:08.0
 
        ### More examples
 
        #BusID "PCI:0:10:0" # lspci says 00:0a.0
 
        #BusID "PCI:1:14:0" # lspci says 01:0e.0
 
        #BusID "PCI:0:5:1" # lspci says 00:05.1
 
EndSection
 
 
 
Section "Screen"
 
        Identifier  "Screen0"
 
        Device      "Hauppauge PVR 350 iTVC15 Framebuffer"
 
        Monitor    "NTSC Monitor"
 
        Option "SecurityTypes" "VncAuth"
 
        Option "UserPasswdVerifier" "VncAuth"
 
        Option "PasswordFile" "/home/mythtv/.vnc/passwd"
 
        DefaultDepth 24
 
        DefaultFbbpp 32
 
        Subsection "Display"
 
          Depth 24
 
          FbBpp 32
 
          Modes "720x480"
 
        EndSubsection
 
EndSection
 
 
 
Section "DRI"
 
        Group        0
 
        Mode        0666
 
EndSection
 
</pre>
 

Revision as of 16:21, 22 December 2009

My Setup on CentOS 5.3

Capture Cards

PVR350 (using TV out)

PVR150

System specs

Pentium 4 2.8ghz 1.2GB RAM

  • Hard Drive 1 - 25GB
** /
** /boot
** swap
  • Hard Drive 2 - 320GB
** /videos

Xorg

I recently moved to an 8400GS. The xorg.conf will be posted when I get a chance.