Difference between revisions of "User Manual:DVB"
m (Updated URLs)
|Line 74:||Line 74:|
* [[Hauppauge WinTV Nova-T PCI]] - A popular DVB TV card.
* [[Hauppauge WinTV Nova-T PCI]] - A popular DVB TV card.
Revision as of 20:42, 26 February 2007
What is DVB?
DVB (Digital Video Broadcasting) is the most popular standard for digital TV. Other standards include ATSC, and Digicipher II (DCII). DVB is, somewhat confusingly, also the name of the Linux drivers used for most DTV receivers in Linux, including ATSC, DCII and other MPEG-2 and MPEG-4 based broadcast standards.
DVB was initially based on the MPEG-2 compression and packet formats, but has recently been extended to support MPEG-4 AVC streams as well. The physical part comes in three variants:
- Terrestrial (over-the-air with an antenna) (DVB-T)
- Cable (DVB-C)
- Satellite (DVB-S)
Some channels (especially pay channels) are encrypted. There's a standardized decryption hardware slot called "Common Interface" (CI) for the decryption hardware called "Conditional Access Module" (CAM), which usually also needs a smartcard for authorization and accounting.
Note: To compile in DVB driver support (used for many DTV devices) into MythTV use a recent kernel (2.6.12 or better) then use the --enable-dvb configure option. E.g.
./configure --enable-dvb qmake mythtv.pro make
as root user:
Note that MythTV DVB users are a relative (but growing) minority compared to the analog users. Hence, many of the 'standard' ways of doing things may be subtly different for DVB users, and this can be particularly confusing for people getting started with DVB. Some things of note:
- People mention getting cards with 'hardware MPEG2 encoders' to reduce the CPU load. This doesn't apply for DVB as it is digital (ie, already getting an MPEG stream)
- Transcoding profiles are a little different/nonsensical for DVB (I believe this has been changed as of 0.19/0.20).
- Recording profiles are not so useful - no longer able to change bitrate or framesize
DVB is widely used in Europe and Asia, both over-the-air (DVB-T) and via satellite (DVB-S). There are hundreds of DVB-S channels available in Europe on the satellite fleets of Astra and Eutelsat, almost all of them "free to air" (unencrypted), including all the major free stations. DVB-T is being deployed at the moment in UK, Germany, France, Australia, Spain, Netherlands, Denmark, Sweden and other countries as a replacement for the classic analog TV over antenna.
In the US, Dish Network uses standard DVB (with Nagravision 2 encryption), while DirecTV uses an earlier, incompatible system that predates DVB, sometimes called DBS (Digital Broadcast Satellite). In Canada, StarChoice uses DCII and Bell ExpressVu uses standard DVB. Most of what's available via FTA in North America is religious programming, or programming not intended for mass consumption. Still, many hobbyists enjoy receiving FTA broadcasts, and a PC with a DVB card is one of the best ways to receive these broadcasts.
Cable operators in the US were supposed to move to ATSC for by 2006 for broadcast channels but few have complied with the law. Most major TV stations in the US are now transmitting a digital signal in ATSC in addition to their analog signal. This can be received with a conventional TV antenna and an appropriate decoder, including several ATSC cards supported by MythTV.
For DVB devices supported by linux see the following pages on the linuxtv.org wiki.
Remark: My frontend is in german language, so don't worry, when the words in this paragraph are not exact the same as on your screen.
Following worked for me: precondition:
- working DVB-S card (tested with mplayer, dvbstream, ...)
- channels.conf from mplayer
- sux - mythtv (just my way to change the user)
- run mythtv-setup
- add dvb-s card, as card type i used: DVB DTV TV-Card (v3.x)
- as Frontend ID there should be some autodetected text, here it is ST STV0299 DVB-S
- Don't forget to set DiSEqC, i set to Universal (Europe)
- For video source i used Transmitted guide only (EIT)
- point 5 on main page of mythtv-setup is something like configure sender
- first i searched for senders (its Sendersuchlauf in german)
- as scantype i used read channels.conf, i used an generated channels.conf for mplayer. Maybe i used scan command from dvb-utils package. It's necessary to tell mythtv which transponders are there
- as result i got entries like br(512)(dvb-s). Unfortunately they are wrong and i only got a blank screen when i tried to watch using mythfrontend.
- Next you should delete the found senders.
- select again scan for senders (Sendersuchlauf)
- use full scan of all known transponders
- know mythtv-setup found the correct settings
- after exit of mythtv-setup, starting of mythbackend and mythfrontend i was able to watch live dvb-s tv.
Please don't hesitate to write me an email with your questions concerning this paragraph. You can use german or english language. My email is public_grueni(_at_)gmx.at. I will try to answere your question and update this paragraph.
- Hauppauge WinTV Nova-T PCI - A popular DVB TV card.
- Hauppauge WinTV HVR3000 - Analogue/DVB-T/DVB-S card in early working stages www.linuxtv.org Install details
- http://linuxtv.org/wiki - The linuxtv.org DVB Wiki (These guys created the dvb-apps tools)!
- http://www.acaciaclose.co.uk - New MythTV 0.18/0.19 DVB on SUSE 9.3/10.0 setup guide
- http://www.digitalregime.com/mythdvb/setup - New MythTV 0.17 DVB setup guide
- http://www.ethics-gradient.net/myth/mythdvb.html - Martin Smiths DVB-T Setup Guide
- http://www.helkit.com/cgi-bin/twiki/bin/view/Main/MythTVDVB-TAndConexantNotes - Richie Jarvis' Guide to setting up Conexant based WinTV cards for Myth (an addendum to Martin's Guide)
- Some utilities/sample code aimed at using radio recordings from DVB with iTunes / iPod / Podcasts