Difference between revisions of "User Manual:Setting up DVB-C (cable)"
(flesh out DVB-C setup some more after yet another succesful installation via IRC this way...) |
(Add Category) |
||
| Line 26: | Line 26: | ||
* [[Channel tuning broken with DVB-C]], Some cable operators just deliver the tuning tables straight from a satelite feed and are unwilling to fix the problem. | * [[Channel tuning broken with DVB-C]], Some cable operators just deliver the tuning tables straight from a satelite feed and are unwilling to fix the problem. | ||
| + | |||
| + | [[Category:Capture Devices]] | ||
Latest revision as of 18:14, 16 September 2015
This page is up-to-date to MythTV version 0.24
Contents
Setting up DVB-C (cable)
In this chapter you'll find information about how to setup up MythTV as a cable (DVB-C) receiver. For general information about DVB and DVB-C you should read the chapter called About DVB.
Common Steps 1-3
TODO insert common part of adding the capture device, creating a video source and connecting both here
Step 4: The Scan for Channels
In order to scan DVB-C with MythTV, you need to give it an initial transponder in a tuned scan. The data you need to enter is: frequency, polarity, symbol rate and modulation. The information can be obtained from your operator. (Should it not be easily available it can also be obtained from an initial tuning file or a channels.conf for your location.)
Warning: Do not import a channels.conf into MythTV any more. It does not provide all the information necessary to properly tune DVB and will lead to myriad problems.
Known Issues
There is only one simple solution for these problems: Talk to your cable provider they need to fix it!
- #7486, Some cable operators don't mark the correct tuning tables in their networks active. The ticket has a patch that allows selecting the correct tables.
- Channel tuning broken with DVB-C, Some cable operators just deliver the tuning tables straight from a satelite feed and are unwilling to fix the problem.
