VDPAU

From MythTV Official Wiki
Revision as of 20:00, 11 July 2009 by Rune.evjen (talk | contribs) (User results)

Jump to: navigation, search

General

What is it

VDPAU (Video Decode and Presentation API for Unix) provides a large subset of PureVideo HD functionality for NVIDIA Linux, Solaris, and FreeBSD users. It in essence provides what PureVideo/DirectX Video Acceleration is on the Windows platform. In addition to updated NVIDIA binary drivers that support the API, extensive documentation is available.

Some highlights of VDPAU:

  • Defines an API for GPU-accelerated decode of MPEG-1, MPEG-2, H.264, and VC-1 bitstreams.
  • Defines an API for post-processing of decoded video, including temporal and spatial deinterlacing, inverse telecine, and noise reduction.
  • Defines an API for timestamp-based presentation of final video frames.
  • Defines an API for compositing sub-picture, on-screen display, and other UI elements.

Note that VDPAU does not address content protection issues.

Some highlights/limitations of NVIDIA's current implementation:

  • Supported on NVIDIA GPUs with the NVIDIA second generation video processors (see list further below)
  • Currently, only one video stream can be decoded at a time; NVIDIA hopes to lift this restriction eventually.

Supported Cards

VDPAU is currently supported on the following NVIDIA GPUs (driver version 180.44):

Desktop GPUs Mobile GPUs Motherboard GPUs Professional GPUs
  • GeForce Go 7700
  • GeForce 200 Series
  • GeForce 9 Series
  • GeForce 8300 GS
  • GeForce 84xx Series
  • GeForce 85xx Series
  • GeForce 86xx Series
  • GeForce 8800 GTS 512
  • GeForce 8800 GT
  • GeForce 8800 GS
  • GeForce 9500 GT
  • GeForce 9800 GT
  • GeForce 96xxM
  • GeForce 8200M G
  • GeForce 8800M
  • GeForce 8800M GTS
  • GeForce 8800M GTX
  • GeForce 8600M
  • GeForce 8400M
  • GeForce 9200M
  • GeForce 9300M
  • GeForce 9400M
  • GeForce 9500M
  • GeForce 9650M GT
  • GeForce 9700M
  • GeForce 9700M GT
  • GeForce 98xxM
  • GeForce 9800M GTX
  • GeForce 9800M GT
  • GeForce 9800M GS
  • Quadro NVS 140M
  • GeForce 8200
  • GeForce 8300
  • GeForce 9100
  • GeForce 9300
  • GeForce 9400
  • Quadro FX 370 LP
  • Quadro NVS 450
  • Quadro FX 470
  • Quadro FX 2700M
  • Quadro FX 4800
  • Quadro FX 5800
  • Quadro CX

Supported Drivers

Support started with version 180.06. Version 185 is available in 32bit and 64bit versions. Bugs are fixed with every new release.

MythTV Support

Trunk first supported VDPAU in November 2008.

What works?

  • Deinterlacing (select "Advanced (2x, Hw)" for best results, if video card can handle it - many can't)
  • OSD
  • Color controls

What doesn't?

  • Live TV with EPG (due to VDPAU not yet being able to decode more than one stream at once)

Issac Richards suggests making sure composite extension is disabled:

Section "Extensions"
      Option  "Composite"     "Disable"
EndSection

MythTV 0.21-fixes and Ubuntu repository

Jean-Yves Avenard has posted a patch for MythTV 0.21-fixes that backports VDPAU from the development branch. He also provides a Ubuntu/Mythbuntu repository, including mplayer and the Nvidia drivers, for those running that distribution. Add to /etc/apt/sources.list:

   deb http://www.avenard.org/files/ubuntu-repos jaunty release

you need to install the GPG signing key with:

   wget http://www.avenard.org/files/ubuntu-repos/ubuntu-repos.key -O- -q | sudo apt-key add -

In addition to "aptitude safe-upgrade", the package nvidia-glx-180 needs to be installed to replace the earlier version of nvidia-glx-*.

Warning.png Warning: Unlike the support in trunk that sees steady ongoing improvements, the backport is unsupported, unofficial, and only is updated as Avenard finds time and the inclination to do so. As he says, "please do not bother [the mythtv-dev mailing list], and do not lodge bugs in the mythtv TRAC system."

Display Profiles

Setup a display profile with:

   decoder = nvidia vdpau acceleration
   video + osd renderers: vdpau 

and a second recommended as a fallback:

   decoder = ffmpeg (Standard)
   video + osd renderers: vdpau

Compiling MythTV with VDPAU

For Myth to support VDPAU it must be built in. MythTV's compilation script supports this. To enable it use the configure script and the --enable-vdpau option.

The following is an example of how to compile MythTV with VDPAU:

MythTV

  ./configure --prefix=/usr --enable-proc-opt --disable-joystick-menu \
  --disable-firewire --disable-hdhomerun --disable-xvmcw --enable-xvmc-opengl \ 
  --enable-vdpau  --disable-directfb --enable-opengl-vsync

MythPlugins

  ./configure --prefix=/usr --enable-opengl --enable-mytharchive \ 
  --disable-mythbrowser --disable-mythcontrols --disable-mythflix \ 
  --enable-mythgallery --disable-mythgame --enable-mythmusic --disable-mythnews \
  --disable-mythphone --enable-mythvideo --disable-mythweather \
  --disable-mythzoneminder --disable-mythmovies

Caveats

  • No AGP cards support this feature (But PCI versions exist)
  • Warning: Do not install the vdpau beta driver unless you intend to use an NVidia-based video cards exclusively thereafter. Merely installing the nvidia driver breaks digital playback on Intel (and probably any other) video/graphics cards. The nvidia installer *replaces* standard header files (/usr/include/glext.h, glext.h,glxext.h and glx.h) and library files (/usr/lib/libGLcore.so, libGL,so, libGLU.so and libGL.la), with nvidia specific versions which breaks OpenGL playback on other graphic cards. (The 180 series drivers do appear to be usable with non-vdpau capable nvidia GPUs (6200 etc.))
  • If you wish to try an nvidia video board instead of your other video/graphic chipset, be careful. Make a mythconverg database backup, and note the SVN of your present working version. In addition, it would be wise to extract the NVidia pkg.run file (NVIDIA-LINUX....pkg.run -x) and make backups of the original files for which copies exist in the ../include/GL, ../lib and ../X11R6 folders. The package help states that the option '--no-opengl-headers' will skip installing the Nvidia OpenGL headers, however it appears that the other libraries will be replaced anyway. It also does not appear to be the case that the '--uninstall' option actually reverses the install, as the orginal files do not appear to be retained. This is a real time-killer ( and WAF killer) and may require a complete re-installation of the system if you wish to revert to a different family of GPU chip.
  • Video profiles can not filter based on video format (only by resolution). So if you wanted to use VDPAU for H.264/HD-PVR and Xv for Mpeg2 this is not currently possible.
  • Off loading to the GPU may increase its heat out-put. It may seem obvious, but check your GPU temperature and cooling arrangements.

Troubleshooting

Tearing of the OSD over a perfect video playback can be avoided by stopping playback, exiting playback, and re-starting playback of the stream. (No idea why this works..only that it does.)

To prevent vertical and horizontal tearing of the image when viewing live tv or recordings, run the following to disable X Composite Extension (may also cure the all white/gray OSD):

   sudo nvidia-xconfig --no-composite

The following configuration changes should be used to prevent issues with VDPAU when used with MythTV:

  • Enable OpenGL VSync within MythTV at Setup -> TV Settings -Playback (Page 1)
  • Enable Extra Audio Buffering (same page)
  • Disable Real-Time Priority (same page) if you have intermittent playback freezes (playback stops for about 30 seconds,the computer is COMPLETELY unresponsive during this period and then playback resumes as is nothing had happened)
  • Adding 'Option "TripleBuffer" "true"' to the Device section of xorg.conf (following the 'Driver nvidia' line) will allocate more memory buffers to 2D playback (and less to 3D).
   Option         "TripleBuffer" "True"


AMD Powernow Kernel Module

If you are using the powernow kernel module with an AMD CPU and are having problems playing HD video with VDPAU (stuttering video or audio) then it maybe that your processor is causing a bottleneck. An 8300 chipset should be capable of running the Temporal x2 deinterlacer, if you are getting stuttering then this is likely to be the issue.

  1. Execute the following command as root to find the current clockspeed of your processor "cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq".
  2. If it reports back a value less than 1800000 then you need to set the minimum processor speed.
  3. Add the following command to /etc/rc.d/rc.local (Fedora, maybe different for other distro's) -
   #Set minimum CPU speed to prevent playback issues with VDPAU
   echo "1800000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq


External Links

NVIDIA Linux Forum

User results

Note: Reports on 1080i content are of greatest interest for deinterlacers. Do not list a deinterlacer if testing on progressive content like 720p. If reports for 720p and 1080i differ (as they will if using a deinterlacer) consider making two entries or indicating the difference in your success/fail results.

Chipset Onboard / Allocated Memory Driver De-interlacer SVN Ver Source OSD Theme Window Manager Display res Working CPU Usage when playing Comments
8200 IGP 512mb 180.29 Temporal 2x r20038 trunk BBC HD H.264 1080i 21Mb/s Metallurgy Terra KWin 1440x900 Yes Athlon 4850e 2.5Ghz 10-15% Some amount of tearing. Visual artifacts for the first 20 seconds.
8200 IGP 512mb 180.29 Temporal 2x r20038 trunk HD-DVD VC-1 1080p 35Mb/s Metallurgy Terra KWin 1440x900 Yes Athlon 4850e 2.5Ghz 35%
Sparkle SFPC84GS512U2LP GeForce 8400 GS PCI 512mb 180.35 Temporal 1x HW 0.21-fixes w/patch OTA 720p and 1080i Retro Retro fluxbox VGA (analog) 1280x1024 Yes AMD Geode NX1750 (1.4 Ghz), ~30% Looks super, OSD set to non-fade. Bob 2x is *almost* useable as is Temporal 2x HW. One field also works well.
Asus EN8400GS Silent PCIe (G98 chipset, 567 MHz Core Clock) 512mb 180.29 Temporal 1x HW 0.21-fixes w/VDPAU patch OTA HDTV (1080i & 720p) Retro Retro Fluxbox 1080p Yes AMD BE-2350 (2.1 GHz) 2% - 5% Temporal 1x HW and One Field are the only deinterlacers that don't cause jerky picture and out of sync audio. All h264 test files from HD Playback Reports are nice and smooth.
Asus EN8400GS Silent PCIe (G98 chipset, 612 MHz GPU Clock) 512mb 180.29 Temporal 2x HW 0.21-fixes + patch r20005 HDHomeRun (1080i+720p), FireWire (1080i+720p) Retro Retro Ratpoison 1080p Yes Pentium 4 3000 5% -10% Temporal 2x/1x work great, albeit with slight stuttering when OSD displays; Advanced 2x/1x still stutter. Bob 2x works too, but pointless given Temporal 2x.
GeForce 9300. Motherboard Asus P5N7A-VM 256MB 180.22 One Field 1x HW 0.21-fixes + patch From disk (originally from pcHDTV HD-5500) Mythbuntu Mythbuntu Xfce 1080p Yes Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz 10% overall Slight oddness on top line. Before VDPAU, CPU usage at .74. I am including complete load average, mythfrontend.real at 5-7%.
GeForce 9200. Motherboard Jetway JNC62K 512MB (shared) 180.27 One Field 1x HW 0.21-fixes + Jean-Yves Avenard testing patches SD MPEG-2 DVB, SD H.264, 720p H.264 sample videos Mythbuntu Mythbuntu Xfce 1080p Yes AMD Athlon 64 X2 4850e 2.5GHz 2-5% No problems so far - before VDPAU, CPU usage at 80% and whirring fans.
Quadro NVS 140M in a Lenovo T61 Laptop 512MB (shared) 180.29 One Field 1x HW 0.21-fixes + patches SD MPEG-2, HD MPEG-2 720p and 1080i from either QAM tuner or Firewire Cable Box Blue Retro Gnome 1440x900 Yes Core 2 Duo T9300 2.5 GHz ~50% on one core OSD sometimes fails to show. Before VDPAU, CPU usage was up to 90% on one core used by Myth and additional 20-30% used by X.
9300 IGP (EVGA 113-YW-E115-TR) 512mb 180.29 (Debian experimental package -1) Temporal 2x r20207 trunk OTA HD 1080i Blue Terra fvwm 1080p Yes Core 2 Duo E5200 2.5GHz <10% Jerky playback w/ Advanced 2x on 1080i. Had to set 512MB GPU mem in BIOS to play 1080i at all. Using Advanced 2x w/o problems for 480i.
GeForce 9300. Motherboard Asus P5N7A-VM 512MB (Shared) 180.51 Temporal 2x HW 0.21-fixes + patch TechnoTrend Premium DVB-C 2300 on remote backend Mythbuntu Mythbuntu Xfce 720p Yes Intel(R) Core(TM)2 Duo CPU E5400 @ 2.50GHz CPU Load approx 5-7 %. Advanced (2x, Hw) used for 720x576i SD, had to change to Temporal 2x HW to have smooth playback of 1080i
GeForce 9400GT. Motherboard Gigabyte Intel G35 512MB (Dedicated) 180.60 Advanced 2X HW for SD, Temporal 2x HW for HD 0.21-fixes + VDPAU patch DVB-T on remote backend Mythbuntu + Avenard repo Mythbuntu Xfce 1080P Yes Intel(R) C2D CPU E8200 @ 2.66GHz CPU Load approx 4-5 %. Advanced (2x, Hw) used for <= 720, Temporal 2x HW or Advanced 1X HW for > 720
GeForce 9400M. Motherboard Gigabyte GA-E7AUM-DS2H 256MB (Shared) 180.60 Advanced 2X HW for SD, Temporal 2x HW for HD 0.21-fixes + VDPAU patch DVB-T on remote backend Mythbuntu + Avenard repo Mythbuntu Xfce 1080P Yes Intel(R) C2D CPU 8500 @ 3.16GHz CPU Load approx 4-5 %. Advanced (2x, Hw) used for <= 720, Temporal 2x HW or Advanced 1X HW for > 720
GeForce 9400M. Apple macbook 256MB (Shared) 180.60 Advanced 2X HW 0.21-fixes + VDPAU patch DVB-T on remote backend Mythbuntu + Avenard repo Mythbuntu Xfce 1280x800 Yes Intel(R) C2D CPU @ 2.4 GHz CPU Load approx 4-5 %. Advanced (2x, Hw) for all content on laptop display
GeForce 8600GT. Gigabyte Intel P35 256MB or 512MB (dedicated) 180.60 Advanced 2X HW 0.21-fixes + VDPAU patch DVB-T on remote backend Mythbuntu + Avenard repo Mythbuntu Xfce 1080p Yes Intel(R) C2D E8200 CPU @ 2.66 GHz CPU Load approx 4-5 %. Advanced (2x, Hw) for all content.
nvidia ion - GeForce 9400. Zotac IONITX-C 512MB 180.51 Temporal 2X HW 0.21-fixes + VDPAU patch (20549) ATSC 720p & 1080i + HDPVR 720p blootube blootube fluxbox 720p Yes Atom(TM) CPU 230 @ 1.60GHz CPU Load approx 4-7 %. Works great even w/ single core atom. No fans. 20W power draw.
NVIDIA GeForce 8300 Motherboard ASUS M3N78 PRO 512mb (shared) 185.18.14 Temporal 2x trunk 20694M BBC HD H.264 1080i 21Mb/s blootube Terra KDE 1920x1080 Yes Athlon 64 X2 5200 2.7Ghz 10-15% Temporal 2x/1x work great, albeit with slight stuttering when OSD displays; Advanced 2x/1x still stutter. Bob 2x works too, but pointless given Temporal 2x.