View source for User:Trogod/System0Up1810Configure

 [[User:Trogod/System0Upgrade1810|System 0 Upgrade to Ubuntu 18.10]]

== Network Ethernet ==
one wired connection is to the internet.  the other wired connection is to my HdHomeRun device.
<pre>
$ sudo ifconfig -a
enp0s10: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.83.111.172  netmask 255.255.255.0  broadcast 10.83.111.255
        inet6 fe80::2a02:6c56:e1b2:5be9  prefixlen 64  scopeid 0x20<link>
        ether 00:24:1d:1d:8d:24  txqueuelen 1000  (Ethernet)
        RX packets 303642  bytes 400943950 (400.9 MB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 91693  bytes 7472639 (7.4 MB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

enp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        ether 10:fe:ed:07:bb:6c  txqueuelen 1000  (Ethernet)
        RX packets 489  bytes 167238 (167.2 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 5930  bytes 1072685 (1.0 MB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 11846  bytes 1084257 (1.0 MB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 11846  bytes 1084257 (1.0 MB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlp1s5: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 00:0d:0a:00:1e:df  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
</pre>

I want to make sure that <code>hdhomerun_config discover</code> will find my HdHomeRun device!

I probably need to do something similar to what I did at [[User:Trogod/System0Upgrade14042]]

30-jan-2019

I followed instructions at https://askubuntu.com/questions/22835/how-to-network-two-ubuntu-computers-using-ethernet-without-a-router

menu > Settings > Network Connections > Wired connection 2 > IPV4 Settings

clicked "Add" and entered 10.0.0.1 as address and 255.255.255.0 as netmask and left gateway empty.  I saw a notification on my screen that Wired connection 2 was connected.

<pre>
enp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.0.0.1  netmask 255.255.255.0  broadcast 10.0.0.255
        inet6 fe80::3e34:6981:551e:8e36  prefixlen 64  scopeid 0x20<link>
        ether 10:fe:ed:07:bb:6c  txqueuelen 1000  (Ethernet)
        RX packets 2736  bytes 935712 (935.7 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 33324  bytes 5616517 (5.6 MB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

~/hdhomerun/libhdhomerun$ hdhomerun_config discover
no devices found
~/hdhomerun/libhdhomerun$ ./hdhomerun_config discover
no devices found
</pre>

not quite there, yet.

I temporarily gave up on this and simply connected the HD HomeRun directly to my router.
Now...
<pre>
$ hdhomerun_config discover
hdhomerun device 10172423 found at 10.83.111.156
</pre>

so, that's success for now

== Files in home ==

* $ tar cf - bin | ( cd ~; tar xfp -)

== video driver ==
I went to "Software & Updates" from the Ubuntu menu.  Under "Additional Drivers" I chose "NVIDIA binary driver - version 340.107 from nvidia-340 (proprietary, tested)" and clicked "Apply Changes"
and rebooted